I gauge the conditions by the signal reports I receive from all the stations I
work. It is not guess work. It is solid fact from what is occuring on the
air. I use the same radio and the same antenna to glean these results.
Conditions were better for the two nets today than they have been
- Original Message -
Kevin Rock [EMAIL PROTECTED] wrote:
Conditions were better for the two nets today than they have been in some
time. The sun threw a coronal mass ejection at us which caused aurorae.
The same improvement noticed here on 40m Sunday evening your time Kevin,
Understand. I did pick up the DL1, and check the readings. They were
along the lines of what I experienced with the MFJ. But I could not
read it at a higher power, as it is only a 20w dummy load. But it
jibed with what I was seeing. I will get further readings with it and
a voltmeter.
This is admittedly topic skew, but for non-critical occasional am listening,
it would be nice to have a much lower cost option than the $120 filters. A
cheap ceramic or 2-xtal filter, about 15Khz bw would have been a nice
addition to the K3, maybe even as a st'd component.
73,
Barry N1EU
Very nice job Paul. You made the build look fun and easy and captured how
beautiful the boards and other assemblies look.
Thanks for a real nice effort.
73,
Dave W8FGU
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
For k3/100 with 400hz and 2.8khz filters, ordered 8 May 2007. Notification of
shipment within 7-10 days received on January 13. Invoice number 47699.
The wait is almost over. Yeah!
Joe
k4nvj
k1#764
k2#4155
___
Join Excite! -
Paul,
that was entertaining, enjoyable and informative; thanks very much.
73 de Dave, W5SV
Paul Webb wrote:
If any one wants a look , i took a load of photos while building my K3 and
have put them together as a video, i intend to put a voice over explaining the
build but have not had time
A cheap ceramic or 2-xtal filter, about 15Khz bw would have been
a nice addition to the K3, maybe even as a st'd component.
I don't know if off the shelf ceramic filters are available at
the right frequency. The issue with two or three crystal filters
would be image rejection (the image
I think part of the problem is not only finding an economical AM filter,
but ALSO being able to PREVENT users from trying to TRANSMIT THROUGH IT!
Tom N0SS
At 09:17 01/14/2008, Joe Subich, W4TV wrote:
A cheap ceramic or 2-xtal filter, about 15Khz bw would have been
a nice addition to the
Am I the only one experincing this?
de Doug KR2Q
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Don Wilhelm wrote:
I find that with a good 50 ohm dummy load and an 100 MHz oscilloscope
with a 10X probe (probe rated for 100 MHz), I can calibrate the KPA100
wattmeter to less than 5% accuracy on bands below 20 meters - at higher
frequencies, the 'scope and probe rolloff will indicate lower
Vic K2VCO wrote:
Be careful if you use this method! I learned the hard way (destroyed
THREE probes) that the voltage rating for scope probes goes down as
frequency goes up. There is a little piece of paper that comes with the
probes; look at it, compute the voltage across your dummy load at
Hello,
I received the same error message.guy kb3ckw
DOUGLAS ZWIEBEL wrote:
Am I the only one experincing this?
de Doug KR2Q
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
Don Wilhelm wrote:
I find that with a good 50 ohm dummy load and an 100 MHz
oscilloscope with a 10X probe (probe rated for 100 MHz), I can
calibrate the KPA100 wattmeter to less than 5% accuracy on bands
below 20 meters - at higher frequencies, the 'scope and probe
rolloff will indicate
I am hoping that Elecraft will have a different option for AM listening by
the time that my K3 arrives (in April). A simple, lower-cost ceramic filter
would be nice. Or, perhaps the roofing filter can be bypassed for AM
listening. There are several receivers out there that have DSP-only
With the DL1, when you do the calculation to get the power level, what
do you measure with? V-AC or V-DC?
Dave Wilburn
K4DGW
K2/100 - S/N 5982
David Wilburn wrote:
After trying unsuccessfully to get email to take data in tabs, I ended
up just putting the information on my website. Sorry
I hear that there have been so many hits that Paul M0BMN's web bandwidth
has been exceeded. I think it's a matter of Try again later, maybe
tomorrow.
73
David G4DMP
In a recent message, guy ghisu [EMAIL PROTECTED] wrote ...
Hello,
I received the same error message.guy kb3ckw
DOUGLAS
David Pratt wrote:
I hear that there have been so many hits that Paul M0BMN's web bandwidth
has been exceeded. I think it's a matter of Try again later, maybe
tomorrow.
The site has exceeded its bandwidth. For a lot of ISPs that would mean, try
again next month.
--
Cheers!
Kevin.
Yes, I think it has slipped another week. I was quoting from the 27
December update which specifically said 4th-9th May orders with deposits
would be shipped by 11 Jan. Looks like 8/9 May orders will now be
shipped this week. There was certainly some activity over the wekend at
Aptos including
Chris,
You may want to recalibrate your shipping estimate by a few days. I have
just received notice that my K3/100 kit (100% prepaid- 50% deposit with
order and the second 50% paid in August upon original shipping estimate)
will ship in 7-10 days. I am extremely happy to have finally bubbled
I am hoping that Elecraft will have a different option for AM listening by
the time that my K3 arrives (in April). Perhaps the roofing filter can be
bypassed for AM listening. There are several radios out there that have
DSP-only selectivity for AM reception: RX-320, Jupiter, etc. (Which also
FYI...
-- Forwarded message --
From: Leslie, Dave [EMAIL PROTECTED]
Date: Jan 14, 2008 10:56 AM
Subject: RE: [Elecraft] Video of my build of K3 S/N 207 = ERROR page not found
To: DOUGLAS ZWIEBEL [EMAIL PROTECTED]
I'm at work, so can't reply to the list. If you try just the web
The 10X probes I have are rated at either 300 volts or 600 volts, so no
problem.
Vic does bring up a very good point that you should know the ratings for
anything that you use in electrical measurements - not only to keep from
destroying it, but also to know whether the device will behave as
David,
The diode in the DL1 recitfies the RF and you read the DMM in DC volts.
The DL1 uses a peak reading detector across half the load, so the DMM
will read 1/2 of the zero to peak RF voltage. At low power levels (less
than 1 or 2 watts), you should add the diode drop to the indicated
On Sun, 13 Jan 2008, Dave Martin wrote:
adjacent channels. But the wide IF sure brightens up the music when
listening to your local honky-tonk station,
We don't have any AM honky-tonk local stations...that's why a top-knotch
receiver would be great to listen to the Grand Ole Opry.
But
On Mon, 14 Jan 2008, Kevin Cozens wrote:
David Pratt wrote:
I hear that there have been so many hits that Paul M0BMN's web bandwidth
has been exceeded. I think it's a matter of Try again later, maybe
tomorrow.
The site has exceeded its bandwidth. For a lot of ISPs that would mean, try
Mike N8XPQ wrote:
I have the video saved. I can email it if your server will handle a 15.5
MB file.
Mike N8XPQ
Isn't YouTube the answer to this sort of thing?
-
Julian, G4ILO K2 s/n: 392 K3 s/n: 222
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
--
View
For us stuck with dial-up service the -IS- no answer. (:-(
15 Meg would take hours
73! Ken - K0PP
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub
Send it to [EMAIL PROTECTED] - I have unlimited high-speed bandwidth (but it
costs me a bundle).
Simon Brown, HB9DRV
- Original Message -
From: G4ILO [EMAIL PROTECTED]
Isn't YouTube the answer to this sort of thing?
___
Elecraft mailing
Ok, I got all kinds of numbers off of the DL1. The Bird seems a touch
low, showing 80 - 100w across all bands. Every time I measure it a
different way, I get different numbers. Very frustrating. The W1
quit after about 5 min. The MFJ meter gives one reading, the Bird
another, using the
Julian,
I think you're referring to the shield immediately behind the
front panel ...
Mine (S/N 56) was badly scratched, as if the sub-contractor (?)
had carelessly tossed it into a bin with others as they came off the
punch press or bending brake. It was also wrapped in thin tissue
paper,
Please also send to [EMAIL PROTECTED]
Paul
- Original Message -
From: Simon Brown (HB9DRV) [EMAIL PROTECTED]
To: G4ILO [EMAIL PROTECTED]; elecraft@mailman.qth.net
Sent: Monday, January 14, 2008 1:22 PM
Subject: Re: [Elecraft] Video of my build of K3 S/N 207 = ERROR page not
found
G4ILO wrote:
Isn't YouTube the answer to this sort of thing?
That would be one place to put the file but the quality of the images for
files on You Tube often aren't very good but at least they are watchable. The
size/run time for the videos on You Tube also seems to impose limits.
--
Bob Evans-6 wrote:
Now that shipment of orders placed up to 9 May has been made I am
waiting excitedly to hear from Aptos of the impending shipment of my K3
Exciting times Chris G3SJJ
When checking you have all the bits, you should also check that all the bits
are OK.
My
Anyone who clicked on the link below probably had the same shock as I did!
The 's' at the end of 'fists' is significant!
73 Stephen G4SJP
On 14/1/08 17:30, DOUGLAS ZWIEBEL [EMAIL PROTECTED] wrote:
FYI...
-- Forwarded message --
From: Leslie, Dave [EMAIL PROTECTED]
I saw it too. The FISTS server exceeded their bandwidth alotment.
Bruce, NM5B
- Original Message -
From: DOUGLAS ZWIEBEL [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Monday, January 14, 2008 8:39 AM
Subject: [Elecraft] Video of my build of K3 S/N 207 = ERROR page not
found
David,
You are chasing your tail since you are trying to use all those
wattmeters - they will all be different.
You say that you are using a wattmeter between the KPA100 and the KAT100
- that in itself can lead to a variety of readings. The only thing you
can really trust is a good dummy
Hello,
Setting up the K3 with PC and have audio coming out of sound card.
Testing with DigiPan and tx audio connected to K3's Line-In isn't
working. Yes, I set the main-menu to Line-In ... but nil, regardless
of how high I set the audio sliders for the sound card. Even tried a
mono plug.
Nice test lab pics...But I got a question about the bottom left picture ?
Why is Dale-W6DEF scratching his head ?
K3#...on order,When the moment is right.
Anthony - N3ANT
--
View this message in context:
http://www.nabble.com/K3-Test-Lab-Pics-tp14812185p14812185.html
Sent
Alan
There were some problems with setting Line in that have been cleared up
with the last two firmware releases. The audio data modes now seem to work
well, so I would ask the obvious questions:
Do you have the latest firmware?
Is mode set to data?
Is data mode set to data A?
With my
Hi:
Looking for G4ILO K3 build video?
Try:
http://tyrrell.us/k3build/k3build.wmv
Let me know if this works. I recorded this early, no
sound.
I am waiting for a K3 also.
73, Ty, W1TF, K1#1423, GA
Hi Lexa,
We had a long thread about CW MOX a while back, and the final statement on the
matter was that there is no delay when used in this way -- on immediately when
you press the switch, off immediately when you release the switch.
Bill W5WVO
Alexandr Kobranov wrote:
John,
as I already
Yea, not having a good day. Switching dummie loads and powers and
such. Smoked the DL1, small dummy load, large power. Hobbies are
supposed to be funright? ;)
Dave Wilburn
K4DGW
K2/100 - S/N 5982
Don Wilhelm wrote:
David,
You are chasing your tail since you are trying to use all
I received the kit form of the 100W K3 on 27 Nov 07. I had some troubles
getting the firmware to load and those were resolved by using the only
comm port on the computer. I also had some error messages that went away
when I reseated the front panel and DSP boards. The K3 support folks
were
The video is available here: http://www.hb9drv.ch/tmp/k3build.wmv
Simon Brown, HB9DRV
- Original Message -
From: Paul Webb [EMAIL PROTECTED]
I have had so many people download the K3 Build video that the site exceeded
its 5GB of bandwidth, i have just paid for a extra 1 gb to get
David Woolley wrote:
HF broadcast stations use 5kHz channelling, which would only allow them
2.5kHz with brick wall filtering at both transmit and receive ends, although
they probably do expect to suffer significant adjacent channel interference.
Absolutely, and there is a lot of it -- which
Hi All
I have had so many people download the K3 Build video that the site exceeded
its 5GB of bandwidth, i have just paid for a extra 1 gb to get the web site
back up but i have had to take the video off. I hope someone will be able to
host it elsewhere for me but i will make a Youtube
John W2XS wrote:
the other). If the highest modulating frequency is 5kHz, then the BW of
each sideband will be 5kHz, and the total AM signal will have a BW of 10kHz.
At the receiver, one of the sidebands is discarded, and the other is
demodulated. So, a 6kHz filter should produce a nice
I'm at work, so can't reply to the list. If you try just the web server
- http://www.fist.co.uk , you get This account has exceeded it's
bandwidth quota and has been temporarily disabled. :-)
It's easy to upload .wmv files to YouTube...
73 de chris K6DBG
Yes, that's right, my portable field antenna is working too well.
Just as a test I constucted a 1/2 wave end fed antenna for 20 meters. I
added an electrical 1/4 wave of 300 ohm twinlead. Per the classic end-fed
zepp, only one conductor of the twinlead is connected to the 1/2 wave
radiator.
Elecraft has received a number of reports of very slow firmware load,
sometimes accompanied by a Windows blue screen, when using some USB to
Serial Adapters when loading the DSP with the most recent versions of the K3
Utility.
Many USB to Serial Adapters, including the Elecraft KUSB, contain a
Hi Geoff,
Conditions were wonderful on twenty meters this morning. I had a fifteen
minute contact into Oklahoma which was the best it has been in quite some time.
I have found through the sunspot minimum the sun is still very active, just
not speckled! Those CMEs can do wonders for
...I want to
use the SDR1000 as a panadapter connected to the K3 IF out...
Can the K3 withstand ½ watt on these connections without harm should I
accidentally put the SDR1000 into transmit?
DO NOT transmit into the Rx IF out connector!
The SDR1 can output 1W P.E.P. (+30 dBm). That will
Me too! All day long. The site must be swamped.
Terry, WØFM
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Monday, January 14, 2008 4:15 PM
To: elecraft@mailman.qth.net
Subject: Elecraft Digest, Vol 45, Issue 23
Send Elecraft
Alan
I was going to use VOX instead of a physical PTT, but that doesn't work
well. I've adjusted gains but it insists on cycling on off. Thought
anti-VOX would fix, but it doesn't.
I don't use VOX so I can't comment on it. I use Ham Radio Deluxe which is
integrated with PSK31 Deluxe and the
Dick is having trouble posting this today, so I'm forwarding it to the
list for him.
Eric
*From:* Dick Dievendorff [mailto:[EMAIL PROTECTED]
*Sent:* Monday, January 14, 2008 2:19 PM
*To:* 'Elecraft List'
*Subject:* K3 - Windows Blue Screen with USB to Serial Adapters during
firmware load. New
I want to use my SDR1000 with my K3. First, I want to share the same
antenna via a splitter on the RX antenna connection, and second, I want to
use the SDR1000 as a panadapter connected to the K3 IF out. I have the low
power SDR1000 which produces ½ watt on transmit, I think. My question is
I was going to use VOX instead of a physical PTT, but that doesn't work
well. I've adjusted gains but it insists on cycling on off. Thought
anti-VOX would fix, but it doesn't.
Please check your cable and verify it is firmly seated into the K3 LINE
IN connector. I routinely use LINE IN with
Great Video!
Also find it here --
http://www.zerobeat.net/mediawiki/index.php/Main_Page
Under NEWS:
- K3 Build Video from M0BMN
[Elecraft] Video of my build of K3 S/N 207
Paul Webb m0bmn at yahoo.co.uk
Sun Jan 13 15:15:03 EST 2008
Previous message: [Elecraft] AF1 - couple of questions
Set your soundcard volume to about 50%
Connect soundcard output to the K3 LINE IN.
Connect the souncard input to the K3 LINE OUT.
Set Menu item MIC SEL to LINE IN.
Set mode to DATA. HOLD DATA MD to choose Data-A.
Set power to ~20W (just something to start with).
Use the MIC control to set
Budget is limited at the moment, so I'm looking for pre-owned.
Thanks !
Gary ODell
KE7OTO
Beaverton OR
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub
I finally got my K1 ATU working tonight and made a 40
meter qso. I just wanted to thank everyone for working
with me and especially Don, Steve N0TU, Dave G4AON and
Randy for all of their encouragement. I am sure I
still have more questions, but it is great to be back
on the air after being off for
OK I looked it up. According to Title 47, part 73.44 of the FCC
regulations, http://www.fcc.gov/mb/audio/bickel/amfmrule.html#AM the
modulation of an AM broadcast station must be down 25 dB at 10.2 kHz
from the carrier. Assuming a 3-pole low-pass filter (e.g. a
pi-network), the filter
63 matches
Mail list logo