Dr Faber
My experience though 7 years of Remote operating (CW) is that Teamviewer is
very useful.
You Can make a Remote set up without the K3/0 and RemoteRig at a very low cost.
It may be satisfying your needs. I have a description of my set up on my QRZ
page.
At this very moment QRV with K3
Test
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
Has anyone replaced the K3 fans with a quieter model? If so, please provide
the model number and source.
The first K3 I built the fans were very quite, but the last one I build was
pretty loud and sold it. I am thinking of getting another if I can find a
quieter fan.
Please note: I am not
I had the opportunity last week to run some pretty heavy RTTY operation on my
KPA500 during the W1AW/2 operation. Generally I used my tube amp but I
wanted to see how the KPA500 would perform. Normally I run 600 watts out of
the KPA500 but for this operation I cranked it down to 500 watts. We're
Bug Dot Stabilizer, August 2014 update:
I currently make Dot Stabilizers (a T.R. McElroy invention from the
1930's - see www.artifaxbooks.com/dotstabilizer.htm for history
theory) for the Vibroplex, Speed-X and McElroy keys having the round
pendulum and bugs with the flat pendulum, such as
Now that I've installed the 2 meter module in my KX3, are there plans in the
works at Elecraft to provide a nice belt clip for my KX3, so I can carry the
radio with the antenna held vertically?
Oh yeah, and how about a KXPA100-2 amplifier?
I'm just kidding.
Cheers
Jim K8JK
Sent from
Now that I've installed the 2 meter module in my KX3, are there plans in the
works at Elecraft to provide a nice belt clip for my KX3, so I can carry the
radio with the antenna held vertically?
Oh yeah, and how about a KXPA100-2 amplifier?
I'm just kidding
Don't kid -- it is a
I was trying to load new firmware to my K3. Present MCU version 04.51.
When started I got some Err message and the Tx lamp blinked and the K3 screen
darkend. I tryed to
switch the power off on the K3 but it did not work so I paniced and switched
the power supply off.
I have tryed to switch the
K3 Utility Help, Troubleshooting, MCU Load failure.
73 de Dick, K6KR
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Kurt
Wiksten
Sent: Thursday, August 14, 2014 10:02 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Problems with K3 firmware
On 8/14/2014 5:39 AM, Mike K2MK wrote:
It looks like Elecraft did a fine job controlling temperature for heavy RTTY
operation. I would not hesitate to recommend the KPA500 for RTTY contesting
During the KPA500 beta, I was loaned one for a RTTY contest and told to
run it with all the lights
On 8/14/2014 7:20 AM, James kvochick wrote:
Oh yeah, and how about a KXPA100-2 amplifier?
Look for a used RF Concepts or Mirage (pre-MFJ) brick amp that produces
150W with 2W of drive. They are rare, but great amps.
73, Jim K9YC
excellent description on QRZ, I'll try. I have the programs.
faber
hk6f
El 14/08/2014, a las 2:45, Poul Erik Karlshøj (PKA) p...@telepost.gl escribió:
Dr Faber
My experience though 7 years of Remote operating (CW) is that Teamviewer is
very useful.
You Can make a Remote set up without the
I recently installed a Mitsubishi mini-split system and now have an
antenna concern. I am about to install a new dipole that will pass
within ten feet of one of the interior units (that would be measured
through the wall). I already know that the system has produced no
interference to any
I must be the only one that has bought a P3 with the SVGA board. If no one
else is interested in the NB like the P3 normal display.
Keith
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3SVGA-tp7592060p7592086.html
Sent from the Elecraft mailing list archive at
I doesn't have anything to do with one of their new products, so there
is no reason to waste electrons asking or commenting.
They will get around to it when and if they ever decide to, or are
allowed to, work on something P3 or K3 related, and no amount of asking
will change that.
Sam
On
Thanks to everybody for your advice.
But my problem still not solved, because I am communicating with the K3 via
my Microkeyer2.
Reading the K3 Utility Helpfiles shows that it might be a problem that my
USB to serial connection is
via my Microkeyer2 and the recommendation is to change the
Hi Kurt,
I don't have a Microkeyer but I distinctly remember some list traffic
some time back warning, Don't try to update firmware through a
Microkeyer. If you look at the block diagram on the Microham web site,
the CAT interface comes from the internal CPU in the Microkeyer.
Assuming my
Kurt,
Both Microham and Elecraft warn that one should not attempt firmware
downloads through the MicroHam device. Other K3Utility functions work
fine through the Microham device.
If you have a real serial port on the computer, that is the preferred
connection, otherwise a good USB to
Bill,
All products are required to withstand RF susceptibility levels. So if
you encounter strange happenings with your HVAC system due to RF, the
supplier is bound to take corrective action.
Some may not understand, and some may not even know of the requirements,
so at worst case, you may
I have a P3, my second. The first one had the SVGA card and I have not
missed a noise blanker at all, and I live in a garden home community
with lots of noise from every imaginable source. A noise blanker is only
effective against high rise time impulse noise I wonder if it would
truly be
my previous reply was the short answer, here is the long answer:
reference:
http://www.mail-archive.com/elecraft@mailman.qth.net/msg171471.html
to quote Wayne from 7/10/2014 7:55 PM
quote
Hi all,
Our firmware task lists are sorted by priority. Determination of
Priority is democratic to some
Just wanted to claim the first use of the KX-3 on satellite, both FO29 and
AO7. Worked fine, excellent audio reports. Did need both a receive preamp
and a little help on transmit as well.
--
Mike Herr
WA6ARA
DM-15dp
Home of The QRP Ranch
No trees were killed in the sending of this message,
Hi Keith,
I might be interested but I didn't bother downloading the firmware because I
never look at the P3 screen, only the SVGA screen. How well does it work and
weren't there some caveats mentioned in the release notes?
73,
Mike K2MK
XE3/K5ENS wrote
I must be the only one that has bought
Every microHAM Users Manual includes a specific warning *NOT* to
upload *any* transceiver firmware via the microHAM device. The
microHAM device constantly polls the transceiver for frequency and
mode. Those polls are not compatible with firmware uploads.
73,
... Joe, W4TV
On 2014-08-14
Congratulations, Mike. I'd be interested in hearing about your complete
equipment lineup.
Wayne
N6KR
On Aug 14, 2014, at 5:09 PM, Mike Herr wa6...@gmail.com wrote:
Just wanted to claim the first use of the KX-3 on satellite, both FO29 and
AO7. Worked fine, excellent audio reports. Did need
I assume that you're kidding about both.
It would truly be a shame to take a fine piece of radio craftsmanship
like the KX3 and look like a member of the shack on the belt club.
Of course, I've been seen on campus years ago with either a slide rule
or more than one calculator hanging from my
Of course, some of us had a 12 inch slide rule on the belt and a 5 inch in
the shirt pocket.
Bob
On Thu, Aug 14, 2014 at 5:31 PM, Jim Lowman jmlow...@sbcglobal.net wrote:
I assume that you're kidding about both.
It would truly be a shame to take a fine piece of radio craftsmanship like
the
I connected an A/B switchbox to switch the radio between the MKII and a
serial port on the computer (or an Edgeport US/serial box). It has been
easy to switch the K3/P3 to the serial port for firmware updates.
73, Jim N7US
-Original Message-
Every microHAM Users Manual includes a
Bill I'd like to add a few things to what Don has said. Fortunately the
electronics in your HVAC system is fairly simply and easily shielded. However
when susceptibly problems occur with Japanese designs it can be very difficult
to get them to respond. Let's hope you don't have to go there.
Does anyone have one to sell? Off line, please to k...@arrl.net
73, Jim K9YC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
On 2014-08-14 9:00 PM, Jim N7US wrote:
I connected an A/B switchbox to switch the radio between the MKII and
a serial port on the computer (or an Edgeport US/serial box).
As did I ... COM1 on the motherboard goes to a 4 port switch. Two of
the ports go to two ports switches on each K3/P3.
Had? :-)
Phil W7OX
On 8/14/14, 5:55 PM, Robert Friess wrote:
Of course, some of us had a 12 inch slide rule on the belt and a 5 inch in
the shirt pocket.
Bob
On Thu, Aug 14, 2014 at 5:31 PM, Jim Lowman jmlow...@sbcglobal.net wrote:
I assume that you're kidding about both.
It would truly
I still have my 12 inch Post slide rule, but I no longer have it on my belt.
I also have my 5 inch Post, but it is no longer in my shirt pocket.
Those days are gone, but there was a time when they were required
apparel if one was to succeed in engineering school and after.
73,
Don W3FPR
On
Had a few questions about the set up I am using with the KX3 and satellite
operation. So far I have been on both FO29 and AO7. FO29 is fairly easy
bird to get through, AO7 can be difficult. I have not tried SO50 yet. I use
the compute to control the az / el rotors but not the doppler shift. I
I did the same. Check thrift stores for a RS-232 switch if you don’t already
have one. I picked mine for 25 cents at the local thrift store.
scl
On 2014-08-14 9:00 PM, Jim N7US wrote:
I connected an A/B switchbox to switch the radio between the MKII and a
serial port on the computer (or an
I wish to manually key the transmitter with VOX, and while transmitting have
the VOX switch to LISTEN between words so that I can hear if I double. I
don't want VOX on all the time to key the transmitter when I sneeze, someone
talks to me, I murmur, phone rings, wife pours hot soup in my lap,
Ok, now I am going to be the “squeaky wheel”.
I am the author of Win4K3Suite. With a customer base of a few hundred users
(not one or two users) I have numerous times reported bugs and deficiencies in
the Elecraft API through the elecraft support channels as well as directly to
Wayne and have
I had intermittent problems with HF RF at the 100 to 1500 watt level on
various bands to my rooftop air conditioner unit. Antennas were a beam
about 30 feet above it and a vertical 20 feet away at roughly the same
height. I wrapped several turns of the cable to the thermostat around a
ferrite
38 matches
Mail list logo