Hi Tom,
A mating plug for the KXPD3 paddle input connector is
http://www.digikey.com/product-detail/en/PPPC022LJBN-RC/S-ND/776013.
This is a PC mount but I would think you could connect wires to it.
Cheers,
Fred KE7X
The Elecraft K3: Design, Configuration and Operation 2nd ed
The Elecraft
Sorry if this has been asked before, but is it possible to turn off the
backlight while using the internal charger to charge the internal
batteries? The backlight is on by default.
It seem a waste having the backlight lit for several hours while
charging and it would be good for it to default to
The last backlight status is maintained during charging.
If the backlight was on it stays on.
If the backlight was off it stays off.
I have not found a other solution.
Rijk de PE1PTJ
2014-11-26 15:52 GMT+01:00 David G4DMP da...@g4dmp.fsnet.co.uk:
Sorry if this has been asked before, but is it
Thank you, Rijk, it is a pity it cannot be forced into the OFF state.
73 de David G4DMP
In a recent message, Rijk van Harn pe1...@gmail.com writes
The last backlight status is maintained during charging.
If the backlight was on it stays on.
If the backlight was off it stays off.
I have not
David,
If you are charging from mains power, why are you
concerned about the few milli-Amps the backlight
is consuming?
Phil W7OX
On 11/26/14 8:02 AM, David G4DMP wrote:
Thank you, Rijk, it is a pity it cannot be forced into the OFF state.
73 de David G4DMP
In a recent message, Rijk van
David,
The backlight follows the MenuBKLIGHT setting no matter what you are doing.
Just go to MenuBKLIGHT and select OFF. You can do this even while you are
charging. If you shut your KX3 off during charging, you can still restart the
KX3, go to MenuBKLIGHT, and then select OFF and
Hi all,
Many thanks to all who replied. I updated N1MM logger to the most recent
version, re-edited the macros in the manner described by K4MTX in his blog
(who did it for the KX3) and it seems to work with the K2 as well.
There seems to be enough space in the connectors of the pseudo-serial
One of the N1MM+ developers solved a CW stutter problem today for one of
our users, which was caused by latency in a USB-to-serial adapter. The
solution was to make sure you're using an FTDI adapter, and go direct to
the manufacturer for the latest version of the driver.
73, Pete N4ZR
Check
Anyone using a K3 with the Palstar AT-AUTO antenna tuner. How do you
hook it up? A y-cable? I don't want to lose rig control.
73 Dwight NS9I
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Thanks Wayne, Bill and Willis for your replies.
I suppose the battery could be bad - but this has been a consistent problem
since I assembled the Unit back in March. Could’ve been a bad battery out of
the box I suppose.
Willis - thanks for the perspective! Times have indeed changed (pun
In general, we have seen a variance of this amount on the clock since we first
started shipping K3s. Its in the normal range.
Regards,
Eric
elecraft.com
On 11/26/2014 1:53 PM, Arlen Fletcher wrote:
Thanks Wayne, Bill and Willis for your replies.
I suppose the battery could be bad - but this
OK - Thanks Eric. Is there nothing the end-user can do to improve things -
such as leaving power applied to the K3, etc?
Arlen
On Nov 26, 2014, at 2:26 PM, Eric Swartz - WA6HHQ, Elecraft
e...@elecraft.com wrote:
In general, we have seen a variance of this amount on the clock since we
I bought a big La Crosse wall clock that updates
from WWV each night. Very easy to read and always
accurate. I never look at the clock in the K2, KX3
and K3.
Adding circuitry in the K3 to update its clock in
a similar fashion might be doable, but not by me
-- yet :-)
73, Phil W7OX
On
My K3 clock loses about 9 seconds per day. This is not quite as bad as Arlen's
clock, but it is still annoying. I run quite a few skeds and nets and I like to
be spot on time.
Dear Wayne, are you listening? We need your help to write a little routine that
goes like this:-
When the K3 powers
Not that I can think of. The battery keeps it running when power is removed and
its not particularly voltage sensitive.
Swapping the crystal for the clock might change it a bit, but of course that
could also go in the wrong direction.
73,
Eric
elecraft.com
On 11/26/2014 2:36 PM, Arlen
Also there was a note on NL+ reflector suggesting that when using a
USB/Serial adapter as the interface between the PC and the radio, one should
change some parameters.
Open Windows Device Manager and select the Ports (COM LPT), select your
COM port, then Port Settings, then Advanced. Change
Every room here has a 60 kHZ-synched WWVB clock. Have never looked at ...
or set ... the clocks in my K3 or KX3. Or the K2 if it has one. We have
an actual clock radio in the bedroom. (;-)
Trivia: The 60 kHZ xmtr NE of Fort Collins is a retired 100 kHZ LORAN C
xmtr from ND.
The last time I
Phil - apparently I’m not finding the right model of LaCrosse clocks! Those
that I’ve looked at that update via WWV cannot be set to GMT!! I even asked
their support folks about it.
73, Arlen AA7F
On Nov 26, 2014, at 2:59 PM, Phil Wheeler w...@socal.rr.com wrote:
I bought a big La Crosse
We don't do time changes here any more, always daylight saving time.
Last time I reset the clock in the car was four years ago. It's
currently 10 seconds slow.
Regards,
Mike VP8NO
On 26/11/2014 20:25, Rose wrote:
Every room here has a 60 kHZ-synched WWVB clock. Have never looked at ...
or
The clocks here are SkyScan's from Walmart. They can be set to display
either 12 or 24 hour formats. The BR clock ... with large 7-segment (red)
display ... is from Radio Scrap and can also be either format.
73
Ken Kopp - K0PP
On Nov 26, 2014 4:36 PM, Arlen Fletcher arlenfletc...@mac.com
This is beginning to sound like the saying that the man with two
wristwatches never knows what time it is. Pick a 'time standard' that
is appropriate for you - Cellphone time or Atomic clock as your time for
skeds (those are quite accurate) as well as the time standard from WWV.
The K3 clock
I have a couple of JAMECO kit 24 HR clocks with 1 7-segment red display.
They aren't WWVB-synched.
73
Ken Kopp - K0PP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
I have many thousands of feet of new Cat 5 and Cat 5e that I will give away for
the shipping. Full boxes and part boxes. Also lots of used as well. In
addition have Cat 3, miniature coax, other shielded twisted pair etc. Mostly
new.
If there is enough interest I will make a list of what I
On Wed,11/26/2014 1:40 PM, Pete Smith N4ZR wrote:
One of the N1MM+ developers solved a CW stutter problem today for one
of our users, which was caused by latency in a USB-to-serial adapter.
The solution was to make sure you're using an FTDI adapter, and go
direct to the manufacturer for the
To continue dreaming: Since the K3 is a wide band receiver, it
could also automatically update itself from WWV/CHU/etc.
73 Bill AE6JV
On 11/27/14 at 3:01 PM, ro...@monitorsensors.com (Roger Crofts) wrote:
Dear Wayne, are you listening? We need your help to write a little routine that
goes
The time displayed on cell phones is probably the most accurate that's
available to most of us. It's synched to the satellite system which is
synched to the NBS cesium standard in Boulder.
73
Ken Kopp - K0PP
__
Elecraft mailing list
Arien,
This is the one I have. It does set to GMT.
http://www.amazon.com/gp/product/BVYIZC/ref=oh_aui_search_detailpage?ie=UTF8psc=1
73, Phil W7OX
On 11/26/14 3:35 PM, Arlen Fletcher wrote:
Phil - apparently I’m not finding the right model of LaCrosse clocks! Those
that I’ve looked at
My watch is a Casio Pathfinder (barometer,
altimeter, compass, and even keeps time!). It gets
updated every night via Colo WWV station -- unless
I turn on my TV converter from Time-Warner; then
it does not update, even if the converter is 10 ft
away.
Phil W7OX
On 11/26/14 3:54 PM, Don
I built my own 24 hr dual zone station clock. It uses a WiFi link to keep
synchronized time. Never have to set it and always accurate.
Details: http://wb4son.com/wpblog/?page_id=716
73, Bib, WB4SON
On Wednesday, November 26, 2014, Ken G Kopp kengk...@gmail.com wrote:
I have a couple of
On 11/26/2014 3:48 PM, Ken G Kopp wrote:
The clocks here are SkyScan's from Walmart. They can be set to display
either 12 or 24 hour formats. The BR clock ... with large 7-segment (red)
display ... is from Radio Scrap and can also be either format.
Unless things have changed in clock
I'm feeling lucky (quite rare). My KX3 (just checked) was ~20s off my NTP
synced computers, and I set it about 3 months ago. I suppose it will drift
more over time, but it sounds like there is variance that exists between
units. How much do these clocks change over time in terms of
Next time you have little or nothing to do, and have a P3, set the span
to about 10 KHz, go to AM, and center any of the WWV's in the display.
You *should* see:
1. The carrier
2. The 100 Hz subcarrier around it that carries the IRIG-H time code
3. The pair of tone sidebands [if the tone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
WT-8005 cannot be set to UTC.
Bought a pair on Amazon.
WS-8115U can be set to UTC.
Bought another pair on Amazon to replace the ones that didn't do UTC. HI!!
I chose this style as the numerals are @1.75 high and easy to read at a
distance.
72,
Tim K3HX
Take a look at the MFJ-121B, Dual Display, GMT and US Time.
73, Dick, W1KSZ
On 11/26/2014 9:18 PM, k...@juno.com wrote:
WT-8005 cannot be set to UTC.
Bought a pair on Amazon.
WS-8115U can be set to UTC.
Bought another pair on Amazon to replace the ones that didn't do UTC. HI!!
I
On Wed,11/26/2014 4:54 PM, Fred Jensen wrote:
The second and third harmonics of the tones, maybe the fourth harmonic
depending on conditions and strength of the signal at your QTH
How far down were the harmonics? -40 is 1% distortion, -50 is 0.32%. 5%
is widely considered to be
And while you take a look at it, be prepared to go crosseyed wondering why the
seconds on the GMT clock do not match the seconds on the local time clock more
than 30% of the time, even though both clocks show they are receiving WWVB
signals.
:-) and 73,
Eric WD6DBM
Richard Solomon
Have installed internal ATU into KX3, RX is good, menu set to AUTO
ATU appears on the display,
but when I press ATU TUNE, I get message NO ATU.
LC checks produce relay clicks
Ideas anyone?
All pins checked inserted properly, full ESD precautions on installation.
Chris
VK2ACD
38 matches
Mail list logo