Re: [Elecraft] KX1???

Alan, The KX1 comes natively with only 40 and 20 meter bands. The KXB380 option adds 80 and 30 meters. The KXAT1 antenna tuner has a limited range, and is optimized for the no-feedline antenna shown on page 10 of the KXAT1 manual for 40 through 20 operation. Use of the KX1 on 80 meters requi

Re: [Elecraft] KX3 Firmware question

Did the KX3 utility detect the new firmware files and load them onto your radio? If not, it is probably an "oops" where the zip file on the ftp server was prepared incorrectly. In this case, you might need to move the files up a directory level for the utility to find them. If the utility found

Re: [Elecraft] K3 and FLdigi for PSK31

Ramon, You need to use Hamlib or Rigcat with Fldigi - I think Hamlib is easier, but YMMV. Configure Fldigi to use whichever you have chosen. Connect the K3 to a COM port on your computer and tell Hamlib (or Rigcat) which port that may be, and it should work. I 'hear tell' that FLRIG can give

Re: [Elecraft] Data mode and filters

On 2015-05-05 11:30 PM, KV6O wrote: > Huh. Is there anyway around this? No, the DSP is used for demodulation (15 KHz final IF to audio). The 6 KHz bandwidth is generally used for AM where 6 KHz at RF represents 3 KHz at audio (AM RF bandwidth = 2 x AF bandwidth). The 4.2 KHz maximum "HI" freq

Re: [Elecraft] Digital Modes with a KX3 and a Mac

Joshua, Start out taking it one step at a time. Receive first -- All you need to receive data modes is to connect the KX3 headphone jack to the soundcard line in. Fldigi should show you some signals. Configure the soundcard Line In level as well as adjust the KX3 AF Gain. Set the mode in th