I would like a longer delay time on the scan function when a station is
found. Is there a way to lengthen the stop on signal delay?
--
Mike Herr
WA6ARA
DM-15dp
Home of The QRP Ranch
No trees were killed in the sending of this message, however, a large
number of electrons were terribly
Problem solved. Thanks for the responses.
I used the manual TX calibration procedure and it worked just fine.
Hoop
On May 28, 2015, at 14:40 , Jim Hooper k9...@icloud.com wrote:
What factors might result in the K3 Utility Transmit Calibration Gain failing
for both 5 w and 50 w
Is it only my K3 that has this imaging problem with the audio?
I have my L-MIX-R set to A Ab meaning that the main receiver's audio
should be centered in the headphones. That works fine when the sub-receiver
is on, but as soon as I turn it off, the audio drifts to the left. There is
still audio
What factors might result in the K3 Utility Transmit Calibration Gain failing
for both 5 w and 50 w calibration?
I have tried two different dummy loads on Antenna 1.
The K3 automatic tuner gets a 1.0/1 on the dummy load for all bands including
15m, 12m, 10m, and 6m.
Thanks in advance,
Yes, my AFX was accidentally turned on.
Thanks to Gary and Guy. Now the CQ WPX contest is going to be much more
gentle on my ears!
73
-
Sverre, LA3ZA
K2 #2198, K3 #3391,
LA3ZA Blog: http://la3za.blogspot.com,
LA3ZA Unofficial Guide to K2 modifications:
Do you have AFX on? That drifts perceived audio to the left.
73, Guy K2AV
On Thu, May 28, 2015 at 4:24 PM, Sverre Holm (LA3ZA) la...@nrrl.no wrote:
Is it only my K3 that has this imaging problem with the audio?
I have my L-MIX-R set to A Ab meaning that the main receiver's audio
should be
Try turning the AFX off (tap AFX button).
73
Gary, N7IR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Hi Mork. Mom's on her way
Sent from my iPhone
On May 28, 2015, at 1:45 PM, elecraft-requ...@mailman.qth.net wrote:
K9YC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
David,
I also do some 2 meter weak signal, been doing it for many years. I also
have the KX3, PX3 but I use the KX3 internal 2 meter module. I have other 2
meter SSB rigs but find the KX3 to be very good on 2 meters. Your email
made me curious and I did find the signal near 144.4 but I
Well, some improvements today after encouraging words from forum members. Much
opening and closing PX3 case pressing PCBs, reseating connections and cables,
moving power leads and suddenly things are 20 dB better. I can now hear the
weak beacons with the PX3 switched on. Now to tidy up and try
I had problems as well. I used my work laptop with Windows 8.1 and it
worked fine. I think there are issues with Yosemite.
On Thu, 28 May 2015, Jim Hooper wrote:
Problem solved. Thanks for the responses.
I used the manual TX calibration procedure and it worked just fine.
Hoop
On May
Hello Group,
It is off-topic.
This RX contest pre-amplifier is surplus to my requirement. It was bought in
2013 from www.ha8et.hu It is fully functional. Noise figure 0.6dB (typ.
0.5dB) Gain 14-20dB adjustable.
My price is USD55 including shipping by registered airmail. If interested,
please
I have not had a chance to use the tuner yet.
That will happen when I go portable.
But, until then, I'd like to know the relays are functioning.
When I run the menu-test-sequence, am I to just listen for relay clicking?
That's rough for me with my hearing problems.
What would happen if there
I did my TX cal with a Mac running OS X 10.10.3
(Yosemite): No problem.
Phil W7OX
On 5/28/15 5:05 PM, Hisashi T Fujinaka wrote:
I had problems as well. I used my work laptop
with Windows 8.1 and it
worked fine. I think there are issues with
Yosemite.
On Thu, 28 May 2015, Jim Hooper wrote:
If you want to part with a Buddipole Deluxe, I am in the market. Contact me OFF
LIST @ davidahren...@me.com mailto:davidahren...@me.com — many thanks. This
thread is closed. Off list only.
KC0XT, Los Angeles
David Ahrendts davidahren...@me.com
Are you using DATA A or trying to force FSK-442 through the K3 in
USB with the TX_EQ enabled? Again, I see *NO* frequency effects
(crest factor 0.1 dB at 30, 60 and 100 W) with my K3 when using
DATA A and the LINE In.
Also make sure your sound card does not have any enhancements
enabled.
73,
I want to operate psk with the kx2 using a computer.
What is good psk software?
Also, what software can I use to turn my computer into a panadapter? If I
always have my computer, is there any reason to purchase the panadapter
accessory?
Michael Rudolph
N3IRT
* On 2015 28 May 19:01 -0500, Michael Rudolph wrote:
I want to operate psk with the kx2 using a computer.
What is good psk software?
Fldigi. It doesn't matter which of the major operating systems you use,
Fldigi is built for them all.
73, Nate
--
The optimist proclaims that we live in
What roofing filter is being used for your transmit and have the offsets
been set correctly?
One issue I saw once was that the filters were mismatched with the filter
definitions entered and the guy was actually using an 8 pole 1.8 SSB for
transmit which was causing all kinds of problems in data
Arcing. Try reducing power and see if the faults go away. Raise the power
gradually from low and see when the faults appear. Where faults occur and
why is another subject.
73, Guy K2AV
On Thursday, May 28, 2015, w4grj w4...@satterfield.org wrote:
My KPA500 has recently started to switch from
2015-05-27_20_48_16-Time_domain_scope_no_radio.gif
http://elecraft.365791.n2.nabble.com/file/n7603596/2015-05-27_20_48_16-Time_domain_scope_no_radio.gif
2015-05-27_19_07_20-Time_domain_scope.gif
http://elecraft.365791.n2.nabble.com/file/n7603596/2015-05-27_19_07_20-Time_domain_scope.gif
I
My KPA500 has recently started to switch from operate to standby while using
on voice LSB on 40 meters
KAT500 tunes to 1.38 SWR, the bypass SWR is 3.1
This now happening on several occasions...any suggestions appreciated.
Jack
W4GRJ
Mike,
I used FLDIGI or MIXW. Both are quite good. You don't need to worry about radio
control beyond PTT. I was using a SigaLink PSK for the interface and it worked
well. I have a KX3 these days and I use both the internal PSK cap, abilities of
the KX3 and FLDIGI. I go with what is the most
Looked at the sm5bsz pdf showing the K3 at -128 db at 100khz on phase noise
100khz to 200khz likely to be popular same band operation of K3's at your
local Field Day
however
Looking at the published Jan 2009 QST, I read -148db at 100khz separation -
aka the pdf is a bit off
Reviewing the ARRL
Thanks Jim, yes my PX3 was a kit, and I did do the tape removal and check good
electrical contacts as I was sure there could be problems. I don't like the
design of the case, would have much preferred a diecast box instead of silly
thumbscrews and legs that either are too loose or too tight. As
My Dayton order arrives Wednesday via UPS.
Stan, WA1LOU
On 5/27/2015 3:46 PM, Dan Atchison via Elecraft wrote:
Just curious if anyone has yet received a confirmation of orders
placed at Dayton?
Dan -- N3ND
__
Elecraft mailing list
Hi,
just done some tests with K3 and KSYN3A and result are amazing,
(it is not a scientific test in Sherwood stile, but say enough):
it is a P3 schreenshot as proof of incredible strong signal handling of K3
with new KSYN3A board:
/P3 freq. span is 5 kHz,
red band is signal 59+60dB, centered on
I tried the same thing on the bench with an old K3 with original synth
boards (no stiffeners) that I was upgrading. The new synth boards went in
just fine and I inserted a test signal at 28.0150 at 0dBm, 1 milliwatt. I
then tuned 1 kHz away and watched the noise floor drop to S1, so that I
Hi Dave,
Here you can read an example of the problem that you mentioned:
http://www.sm5bsz.com/dynrange/dubus313.pdf
Unfortunately, there are many poor quality radio on the market.
73, Fausto IK4NMF
- Original Message -
From: Dave Olean k1...@metrocast.net
To: bozidar
29 matches
Mail list logo