Mike,
With the blue toroids, you do have the updated KPA100. Can I assume
that this problem is a recent occurrence rather than a problem that has
always been there?
Yes, removing and jumpering out the KDSP2 will likely stop it (or just
try putting it in bypass), but that is not the source
In the meantime, don't forget that email can often work nicely for
those to communicate across time zones. The same people at Elecraft
who answer phone calls, also respond to email. Just make sure to
check your SPAM folder, if you don't have that person at Elecraft in
your contacts
Hi there,
Have you tried opening up the radio and reseating the ribbon cable that runs
between the two halves ?
Cheers,
Mark F...
VK3ZMF / VK3KW
KX3 with the lot # 1675
KXPA100 # 530
PX3 # 233
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
I wouldn't want to start a huge ruckus, but I would love to be able to
show off the P3 transmit monitor for Field Dayjust saying.
73 de
K2QY
John
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Something that isn't clear from the K3 manual.does the TX DLY parameter
apply to both CW andSSB, or is it CW only? Guidance welcome!
73, Quin G3WRR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Johnny,
I have done that mod.
Reason was that my KPA500 had high SWR at the input and barely any gain.
Tracked the problem down to the TR circuit. One of the switching Fet's
(that switch the TR PIN-diodes) had died.
It proved to be an error that happened before, because for a lousy 12
bucks
Thanks Arie.
寄件人︰ Arie Kleingeld PA3A p...@xs4all.nl
收件人︰ elecraft@mailman.qth.net; Johnny Siu vr2...@yahoo.com.hk
傳送日期︰ 2015年06月10日 (週三) 3:54 PM
主題︰ Re: [Elecraft] KPA-500 modifications
Johnny,
I have done that mod.
Reason was that my KPA500 had high SWR at the input and barely
Maybe next year, John.
Phil W7OX
On 6/10/15 4:59 AM, John Fritze wrote:
I wouldn't want to start a huge ruckus, but I would love to be able to
show off the P3 transmit monitor for Field Dayjust saying.
73 de
K2QY
John
__
It would seem that all these line level input/output sound cards would have
some difficulty working with the KX3, which uses mic level input and
headphone level output.
Kindly correct me if I'm wrong.
Cheers, Mark/WN8U
__
Elecraft
Needed, a definition of soon.
On 5/13/15 8:39 AM, Wayne Burdick wrote:
Hi Petr,
The modification only affects 500 kHz and lower. We'll have a modification kit
ready in a week or two.
A few K3s have been modified so far, and all performed very well.
73,
Wayne
N6KR
Way past above and no
The cards I listed yesterday have both mic and line level inputs
(separate jacks) one or the other will be a reasonable match for
the headphone output.
As far as driving the mic input of the KX3 with line (speaker) output,
simply put a 10:1 (20 dB) attenuator in the cable to the mic input.
I have a KX1 in nice condition for sale.
40, 30, and 20 meters.
KXAT1 internal ATU and KXPD1 paddles included.
K6XX tuning indicator.
Manuals
$400.00 shipped
PayPal preferred
Grover K7TP
__
Elecraft mailing list
Home:
I have a KX1 and a T1 for sale — bundled together or sold separately. Prices
below include packaging and shipping in CONUS up to $25 cost (shipping).
Elecraft KX1 with bands: 80, 40, 30, 20. Price: $325
—Note: does not include internal tuner nor does it include paddles.
Elecraft T1
A fine issue this is, Bernie. Couple of questions:
1) Tell us about the connection to your computer. What type? How are using the
computer with the KX3/KPA100/PX3?
2) Have you checked the software settings for the KX3 Utility, the KPA100
Utility and the KX3 Utility? All good there?
3) And just
I have a KX3 with KPA 100 and PX3. They had worked fine until yesterday
when communication between the KX3 and my computer through a KUSB failed
when the KPA100 is on. The KX3 talks to the computer fine when the
amplifier is off, but as soon as I turn it on, either through the KX3 PA
mode
Add new email address ki6oss6...@gmail.com
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
Great guessing Dick!
That worked the first try. I've really got to start playing with
programming these things so I learn better how they work.
Thanks to Dick and others who have responded! Things seem to be working
fine now.
Bernie
W1AZ
On 6/10/2015 8:16 PM, Dick Dievendorff wrote:
17 matches
Mail list logo