Re: [Elecraft] Icom IC-7300

Can we be done with the IC-7300 stuff? After all, this is the Elecraft mail list and I do not think it has anyplace here. Just my opinion. I am sure, somewhere there is a IC-7300 list that will fit your needs. Jim W4ATK On 9/3/2015 3:29 PM, Joe Subich, W4TV wrote: Yes, but is it a

Re: [Elecraft] Icom IC-7300

If Elecraft starts offering high quality/weighted knobs I hope they continue to offer the standard knobs as well. Maybe make that an option.. standard knobs included or pay an extra $500 for the heavier ones. For me, I'll stick with standard. -Original Message- From: Elecraft

Re: [Elecraft] Icom IC-7300

No doubt that DSP IF radios with narrow upstream xtal filters should be everyone's first choice today for a do-everything high performance hf radio. The K3S is unbeatable. That being said, my forays into the world of direct sampling DDC/DUC radios suggest that their receivers may have an edge in

[Elecraft] WTB KFL3A-200

WTB KFL3A-200 Thanks in advance. Jerry Moore AE4PB, __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

Re: [Elecraft] Icom IC-7300

+1 -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim Rogers Sent: Friday, September 04, 2015 7:37 AM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] Icom IC-7300 Can we be done with the IC-7300 stuff? After all, this is the Elecraft mail

Re: [Elecraft] WTB KFL3A-200

Or FL3a-250 8pole -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of ae...@carolinaheli.com Sent: Friday, September 04, 2015 8:02 AM To: Elecraft@mailman.qth.net Subject: [Elecraft] WTB KFL3A-200 WTB KFL3A-200 Thanks in advance. Jerry Moore AE4PB,

[Elecraft] FS: Elecraft K3/100

This is K3/100 S/N 8164 purchased April 2, 2014 KFL3A 2.8 kHz 8 pole filter KANT3 (no auto-tuner) KXV3A KTCX03-1 1ppm TCXO K144XV-100-K 2 Meter module (16 KHz FM Filter will be necessary to use on FM) Latest Firmware Like new condition, single owner. pictures available. Asking $2475 shipped

[Elecraft] KPA500 fan noise

*/I have been so happy with the pair of Noctua fans I put on the back of my K3 very very quite moves a lot of air, so I looked for a way to help my KPA500 cool better because Noctua does not make a fan that will work as a replacement for the fan on the amp. What I did was get a *helper* fan

[Elecraft] K3 /100 watt transceiver

Price reduction, K3 /100 watt transceiver with standard 2.7 filter, KXV3A rx antenna IF out and xverter interface, S/N 5999. Excellent cosmetic and operational condition. Original non smoking owner used as a base station only. Can demonstrate, pick up in Portland Oregon or ship within all fifty

[Elecraft] SSB Transmit Problems:K3

Good Afternoon, This is Mark Griffin, KB3Z. I just installed the KDVR and used config to turn it on and it did. But, for some reason when I key my microphone I am not getting any power output or ALC bars. I have it on transmit normal and the microphone gain has been turned up and down and no

Re: [Elecraft] SSB Transmit Problems:K3

Have you checked the owner's manual? Gain for the DVR can be set differently. You didn't indicate which radio you have. But the K3S manual, Page 30. While speaking into the mic, adjust MON for the desired level. (DVR playback level can be set differently; see CONFIG:TX DVR). -Original

[Elecraft] KX3 TX calibration failure on 52 MHz

The problem is the KX3 TX calibration is failing on 52 MHz at 4.0 W. I would appreciate some advice on how to proceed with diagnosis and correction. First the basic background information: KX3 #8094. Firmware versions: MCU = 2.33, MCU = 1.33. I'm running the KX3 configuration utility Ver.

Re: [Elecraft] KPA500 fan noise

I remember all the flack I got when I when I first posted about the Noctua fans for the K3.They make the K3 nearly silent; It sure would be nice to find a suitable one for the KPA500. I'm glad to see others using them and enjoying the peace and quiet. I may need to try your Helper Fan idea, I

[Elecraft] FS KAT-100-1 Auto Tuner (Built) for K2

I am selling my KAT-100-1 auto tuner. I sold the K2 a few years ago and the buyer did not want the tuner. The tuner worked well with my K2. PLEASE NOTE: The control cable (not the KIO2 accessory which is NOT INCLUDED) as mentioned on page 25 of manual was lost. I ordered the parts to

[Elecraft] OT: For Sale 1979 Vibroplex Original bug

I'm putting my somewhat unusual 1979 Vibroplex original bug up for sale - offering it here before listing it on the auction sites. This one isn't really rare but does have some things going for it. It has the tan base rather than black or chrome. These were available but very few were

Re: [Elecraft] OT - High Power?

Folks are missing the point. If producing even a weak signal at the other end requires maximum legal power, so be it. It's still a weak signal. QRO is a mindset, not a fixed level. 73, Rick wa6nhc Tiny iPhone 5 keypad, typos are inevitable > On Sep 3, 2015, at 11:40 PM, Carl Jón Denbow

Re: [Elecraft] SSB Transmit Problems:K3

And a details on page 31 Digital Voice Recorder (DVR) With the KDVR3 installed, you can record and play voice messages as well as capture received audio. Transmit Message Record and Playback Tap REC to start recording, then tap any of M1 - M4 . Remaining buffer time will be displayed as you

[Elecraft] IC-7300

Phil, Wayne and others My Best SDR radio with super Blocking range, Sensitivity is a K3 with the KSYN3A board and new PreAmp/XV Interface boardmodule board from Elecraft Added an Asus I/Q external sound card box, netbook computer, PowerSDR and a  Larry Phillip's LPPAN-2 and beats everything out 

[Elecraft] Touch screens, etc.

If Elecraft came out with a touchscreen transceiver I would buy it if they maintain their usual standards of performance. And I don't think we have to worry about that. However, before Elecraft goes the touchscreen route I would much rather see them use a colour LCD screen on their

[Elecraft] (OT) Touchscreens

Not sure why I needed to know about an Icom 7300 and am guessing it has a touchscreen.  Leave the touchscreens to the smart phones, IMHO.  If I had a smartphone I wouldn't have a problem with its touchscreen.  I have 3 laptops and have mice for all of them, can't stand touchpads either. 

[Elecraft] OT: For Sale 1979 Vibroplex Original bug

The Vibroplex bug has been sold - thanks to all who enquired. W0EB Memo to NSA, DHS, FBI, CIA, DIA, DEA, ATF, KGB, MI5, and any other alphabet soup agencies that might be listening/reading/tracking my email content, I share this computer with an old lady, an ex-con, a priest, a used car

[Elecraft] FS: LC filter synthesis book by Zverev - a classic

Hello, See www.ebay.com/itm/201421348911 … I’m offering for sale my original/only copy of Zverev’s Handbook of Filter Synthesis. This is the book I used in the 60’s to design many LC filters for GE telecom. I’ll include my design notes if you’d like to learn LC-filter design. Cheers, Alan

Re: [Elecraft] Icom IC-7300

> I agree that the thread is pretty well thrashed, but - > > I do like to hear comparisons of Elecraft equipment with other brands as it > keeps abreast of what's happening out there. Technology is "stampeding > ahead" and all ham gear makers are susceptible to the changing landscape. > > >

[Elecraft] (OT) Touchscreens

There will always be those that try concepts in places they have never been used. But touchscreens have been around for a long time and a lot is known about them. The all time great defining application for them is in restaurants for wait staff to enter your food selection. Repetitive operations

Re: [Elecraft] KPA500 fan noise

Art: Thanks for the info on the helper fan. I just bought one from the Amazon link you provided. Strangely enough, heat is never a problem here in the summer as the Central Air always keeps the shack cool (Basement). During the winter is when the shack gets warm as the furnace runs quite a

[Elecraft] Problem connecting KX3 to Win4K3

Haven’t used my KX3 in many months so I hooked it back up and went to the Elecraft site and updated everything with no issues. As I recently purchased Win4K3 software and am successfully using it with my K3 I figured I’d try it with the KX3. No luck. My KX3 shows up on COM4 on my computer (for

Re: [Elecraft] Icom IC-7300

Jim, I agree that the thread is pretty well thrashed, but - I do like to hear comparisons of Elecraft equipment with other brands as it keeps abreast of what's happening out there. Technology is "stampeding ahead" and all ham gear makers are susceptible to the changing landscape. I hated

Re: [Elecraft] Touch-screen displays

And sometimes it seems the device warrants a couple of thumps with a mallet? Microsoft Lumia smart phone  springs to mind Gary -Original Message- From: "Jim Lowman" Sent: ‎5/‎09/‎2015 7:23 AM To: "elecraft@mailman.qth.net" Subject:

Re: [Elecraft] KX3 TX calibration failure on 52 MHz

Tuck, Do you know for sure your dummy load is a good 50 ohm load at 6 meters? It is always good to check that with an antenna analyzer. Try repeating the TX Gain Calibration on 52 MHz manually from the menu. If it completes both 4 and 6 watts without complaint, you are 'good to go'. 73, Don

Re: [Elecraft] Icom IC-7300

Or replacement fans for the kpa500. Just cause I can't hear them doesn't mean they are quiet.I'm just deaf Who moved my rock?oh there it is, dammit it's getting heavier to lift up to squeeze under Gary -Original Message- From: "Phil Hystad" Sent:

Re: [Elecraft] Touch-screen displays

On vintage radios, when you flip a switch or turn a knob, you can be fairly certain of the result. One problem that I have with touchscreens, with some regularity, is that of certainty that the touch accomplished the intended task. Sometimes I barely graze an icon with my finger, and other

[Elecraft] LABOR DAY K2 tune-up special - first 5

Hello, FIRST FIVE only … I’ll do regular tune-up of K2/10 for $25 and K2/100 for $50. You take care of shipping and insurance. Off-list please … I’ll send you shipping info. Happy holidays, Alan Alan D. Wilcox, W3DVX 570-478-0736 (cell, text) http://WilcoxEngineering.com

[Elecraft] K3 Microphone Connection

Good Evening, I have a Heil HM-12 and what like to connect the microphone to the K3 Microphone connection in the rear of the radio. It would be a XLR 4 to a 1/8" mini plug. I don't know if Heil even makes such a cable. From what I hear most headsets that heil manufactures has a 1/8" mini plug

[Elecraft] Aviation Headset and the KX3

Hi GangI love using a Heil headset with the KX3 but wanted to try something with a little more build quality.I have my old Bose X Aviation headset from my flying days and set them up for the General Aviation plugs. They are really comfortable well made and have active noise canceling built in. 

Re: [Elecraft] OT - High Power?

Gentlemen, thanks for your thoughts on High Power. We’ll now close this OT thread. David A., KC0XT (Aspiring Big Gun & Bigger Than a Pistol! ;—) > On Sep 3, 2015, at 11:40 PM, Carl Jón Denbow wrote: > > Okay, I should have said 100 watts is QRO for JT65 on HF. I've never

[Elecraft] Fan noise

I have to look through the K3's (SN 0052) top cover vent to see if the fans are running. At first thought there was a problem. I -can- hear the KPA500 fan (s) but only if I listen closely. I'm reasonably confident of my hearing, BTW. 73 ! Ken - K0PP kengk...@gmail.com

Re: [Elecraft] KX3 TX calibration failure on 52 MHz

Also check your cable to the dummy load. I had exactly the same symptoms and it was due to a poor ground on the coax. Ron W7HD Tuck Watkins wrote: The problem is the KX3 TX calibration is failing on 52 MHz at 4.0 W. I would appreciate some advice on how to proceed with diagnosis and

Re: [Elecraft] Problem connecting KX3 to Win4K3- Problem solved ! Solution below...

Got a reply back from Tom (Mr. Win4K3) in short order…here’s what he said to do and now it works ! Hi, The KX3 is usually set up by default to run at 9600 baud. There is a menu option in the radio (RS232) to set it at 38400 which is what I usually tell people to do. The Elecraft utility auto

[Elecraft] ARRL SW Torrance CA Sept. 12...

Elecraft will be attending ARRL SW next weekend in Torrance CA. Booth help, especially Saturday would be very welcome. If you are able to spend a few hours at the booth helping to answer questions, etc. please let me know. You can email me directly: l...@elecraft.com. Thank you for your

Re: [Elecraft] Touch-screen displays

What I have noticed over the years is that the UI hardware has gotten worse. Keyboards are the most obvious example. I am a good touch typist. When I started to learn CW (for the third time), I decided to use a keyboard rather than trying to write with a pencil, since I can type considerably

Re: [Elecraft] OT - High Power?

Okay, I should have said 100 watts is QRO for JT65 on HF. I've never used it on VHF, UHF, EME, etc. I know it was developed for EME, but it has evolved a lot since then. The newer JT9 was developed, as I understand it, for terrestrial weak signal use. Perhaps my original meaning would have

Re: [Elecraft] Touch-screen displays

Touch screen technology is just not good enough, very irritating and IMHO totally useless on a transceiver. I hate it on my smartphone too! 73, Deni - F5VJC On 4 September 2015 at 08:28, Bill Frantz wrote: > What I have noticed over the years is that the UI

Re: [Elecraft] OT - High Power?

I can go to 100W with my K3. That is what I currently log as "high power" in RUMlog. There are many K3 options that are higher on my wish list than more power. 73 Bill AE6JV On 9/3/15 at 9:35 AM, davidahren...@me.com (David Ahrendts) wrote: What do you regard as “high power?” Is our beloved