Re: [Elecraft] reply to digest

For those of us who receive only the digest, there is a way to cut down on unnecessary and annoying extra text in our replies. In most email client applications, if you select text before hitting the reply button, only the selected text is quoted in the reply. This message is a response to

Re: [Elecraft] K3S SSB TX monitor

Hmm. Might need an external volume control. I used this setup to boost the audio output and drive speakers with my KX3, but it might work with the K3. The K3 is capable of much higher audio output, but if you tap off the headphone audio, this will probably work. This uses a 12V audio amp

Re: [Elecraft] K3S SSB TX monitor

The K3 is the only transceiver I've used with this facility. Monitor level is saved per mode. I have SSB = 4, CW = 10 and Data = 5. I never notice any monitor audio on SSB, neither do I particularly feel the need and could just as well turn it off. Sidetone on telephones was an attempt to stop

Re: [Elecraft] K3S SSB TX monitor

To prevent monitor audio from the microphone from reaching the speaker, while keeping it going to the headphones, and to do this without operator intervention, seems a simple enough requirement. If you do not want speaker audio when using headphones set CONFIG:SPRK+PH = OFF *AS DOCUMENTED IN

Re: [Elecraft] K3S SSB TX monitor

You can write a macro to control the monitor level. Use the ML command. ML (Monitor Level; GET/SET) SET/RSP format: MLxxx; where xxx is 000-060. Applies to current mode (CW sidetone, voice, or data). In voice modes, applies to MON level, even if DVR monitor level is independent (MAIN:TX DVR).

Re: [Elecraft] K3S SSB TX monitor

Barry, Thank you. You've confirmed what I suspected: that the desired functionality doesn't exist. To prevent monitor audio from the microphone from reaching the speaker, while keeping it going to the headphones, and to do this without operator intervention, seems a simple enough requirement.

[Elecraft] KX2 Matching Power Amplifier

I second this. Except that said amplifier should have an additional option: a modular high-capacity battery pack. Strung together, the whole ensemble would make a mini-manpack radio :) -- Nathon Hall VE7ETS SOTA VE7 (British Columbia) Association Manager h...@cotr.bc.ca -- Date: Thu, 6

Re: [Elecraft] JT65

The connections are that same to run any soundcard data modes - JT65 is just one of many soundcard data mode applications. Things are a bit easier if you use an external soundcard, but it will work fine with the internal computer soundcard. If you use the internal soundcard, be certain to

Re: [Elecraft] KX2 Matching Power Amplifier

I've been using my old HF-PACKER amp I've had about 7 yrs with the KX2. 2 watts in gives me 40watts out for portable ops here in Florida. I use a Buddipole 5Ah battery for the amp and the internal battery in the KX2. I was on the air every day for almost a week at Flamingo in the Everglades last

Re: [Elecraft] K3S SSB TX monitor

Richard I do not believe that the K3 can do what you want. The monitor is either on or off independently of whether you are listening through the speaker or headphones. If you mainly listen through the speaker, just turn the monitor to zero and them turn it up when you wear headphones. I think

Re: [Elecraft] K3S SSB TX monitor

On Thu,4/6/2017 1:53 PM, Richard Lamont wrote: Is there any way of configuring the rig to do precisely this? Yes. It's easy. In a post a few hours ago, I described the process. And it's in the manual. See the large tabulated description of Menu Settings. 73, Jim K9YC

Re: [Elecraft] KX2 Matching Power Amplifier

In an ideal world, perhaps. But much of the limit on what you can work with 5W is not QRM, but rather the noise in the other station's receiver (man-made and static) and the quality of his/her RX antennas. I can give MANY examples of stations whose TX signal far out reach their RX capability.

Re: [Elecraft] KX2 Matching Power Amplifier

I am also using the hardrock 50, works well have the internal atu as well, I think the kit was 479 or something like that, took about 6 hours to build, nice kit. works well, but don't hardly turn it on 5 watts CW gets me where I want to go 100% of the time.. Fred Fred Moore email: f...@fmeco.com

[Elecraft] JT65

What connections do I need between my K3 and my iMac computer to run JT65. Thank you K6CG __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] K3S SSB TX monitor

My previous post might not have made it clear what I'm trying to achieve with the K3S. For RX audio, I usually listen on speakers. These mute when I plug the headphones in. That's standard and obvious and just what I want. When I'm using a voice mode with a microphone, I need the TX monitor

Re: [Elecraft] KX2 Matching Power Amplifier

Sure, every little bit might help but, IMX, power is a matter of parity. For example, if everyone ran 5 W maximum you'd be able to work almost all the stations you hear with the KX2 "barefoot". For us QRP enthusiasts the challenge is spotting good signals from OTHER QRP stations that tells us we

Re: [Elecraft] KX2 Matching Power Amplifier

You just described the HF Packer Amp. http://www.hfprojects.com/#!/miniHFPA-HF-Packer-Amp/p/80855866/category=0 wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Apr 6, 2017, at 12:42

Re: [Elecraft] KX2 Matching Power Amplifier

The KX2 is recommended to operate at 5 watts and below for digital modes. When operating QRP, you are often at the noise level on the receiving end, especially with compromise antennas. Any improvement, even 5 dB, will make the difference between being heard or not. My primary design goal

Re: [Elecraft] K3S SSB TX monitor

Hi Richard, There's a menu setting for SPKR + PHONES (from memory, I think that's what it's called) that toggles the speaker on and off. I assign that function to one of the soft buttons. Works great! 73, Jim K9YC On Thu,4/6/2017 11:30 AM, Richard Lamont wrote: It would be useful when

Re: [Elecraft] K3S SSB TX monitor

Richard, Certainly, turn the MON to zero - either manually or with a Macro. 73, Don W3FPR On 4/6/2017 2:30 PM, Richard Lamont wrote: Is there any way of configuring the rig so that when using a voice mode with a microphone, the TX monitor feeds the headphones but not the speaker(s)?

[Elecraft] K3S SSB TX monitor

It would be useful when operating SSB to be able to hear my own voice in the headphones, but not on the speaker, where it can cause feedback. Is there any way of configuring the rig so that when using a voice mode with a microphone, the TX monitor feeds the headphones but not the speaker(s)? 73,

Re: [Elecraft] KX2 Matching Power Amplifier

No it doesn't, at least for the engineers who created this little tuner. Please check the Elecraft T-1 FAQ, :) *Q: What’s the highest power level the T1 can handle? Can I use my 30-40 watt amplifier?* *A:* The T1 is rated at 20 W SSB/CW and 10 W FM/AM/digital modes. However, to ensure that the

Re: [Elecraft] KX2 Matching Power Amplifier

Well glad it is going to work for you. I bought it and the tuner for mobile work. I did not want to spend a fortune as my mobile time is fairly random, but found that my wonderful KX2 was just not being heard from the car when I tried to put out counties or make contacts. I could hear a lot but

[Elecraft] Lightning can effect the ionosphere

I just read about an ELVE above the Czech Republic. ELVE - Emissions of Light and Very Low Frequency Perturbations. http://spaceweather.com/ has an article and an image. The phenomenon creates a red doughnut shaped ring lasting less than 0.001 seconds. It does require a more forceful

Re: [Elecraft] KX2 Matching Power Amplifier

Ron – Found it! Very impressive amplifier for my KX2. Guess I’ll build one while waiting for the Elecraft KXPA35 (or maybe the KXPA50…?). The Hardrock 50 has a lot more features than I was looking for, but they are all useful. Thanks for the help. Again, very impressive! Bert N8NN

Re: [Elecraft] Amplifier

Which connectors? What's the anticipated problem? Please explain. Tnx 73 Josh W6XU Sent from my mobile device > On Apr 6, 2017, at 9:28 AM, Dennis Watkins wrote: > > I would suggest that a redesign on the K2/K3s would be a starting point. The > cheesy connectors on the

Re: [Elecraft] KX2 Matching Power Amplifier

> I'm enjoying my new KX2 transceiver! I'd like to see Elecraft make a > matching RF amplifier with about 35 watts output with 5 watts in. Since the KX2 runs 10 watts out, more or less, you're asking for external gear to run only 5 dB better. I wouldn't consider something like that for even a

[Elecraft] Amplifier

I would suggest that a redesign on the K2/K3s would be a starting point. The cheesy connectors on the back of the k3 will not stand up to a strong field from a 1.5kw amp with the tower mounted to the house. To much leakage for me.

Re: [Elecraft] KX2 Matching Power Amplifier

sorry, it is hobby pc that makes the amplifier, here is their website, and it is the hardrock 50., https://www.hobbypcb.com/ Today is a good day to have a Great Day! 73 Ron Wilcox KF7ZN On Thu, Apr 6, 2017 at 8:53 AM, Bert Garcia N8NN wrote: > Ron – I couldn’t find

Re: [Elecraft] KX2 Matching Power Amplifier

I’m hoping Elecraft will make the KXPA35 a bare-bones amplifier and leave out the band data capability to save cost. An antenna tuner is needed, but all the other do-dads drive up the cost and pretty soon you will have a KXPA100(minus) rather than a true KX2 companion. I’m told the KXPA100

Re: [Elecraft] KX2 Matching Power Amplifier

It would be a good idea if the KX2 could be modified in order to get the Band Data signal from the ACC socket, for as it is now it only provides with the Key Out signal. I don't know though how the Band info is arranged in the Kx2/KXPA100 combo, may be some RF sensor? 73 Linas LY2H On 2017

Re: [Elecraft] RS232 port selection

while i have been successful using MicroHam MK2R's virtual serial ports for upgrading, AFTER tuning the port CAT connection emulation to none from Elecraft K3..Now I use a serial hard switch and flipping the P3/K3 from the microham to another hard serial poert at the CPU. Joe ( microham)

Re: [Elecraft] KX2 Matching Power Amplifier

qrp guys also makes a nice 50 watt amplifier that works great with the KX2, has the cable for it, comes as kit for the fun of putting it together, quality product as well Today is a good day to have a Great Day! 73 Ron Wilcox KF7ZN On Thu, Apr 6, 2017 at 8:18 AM, Irma & Linas(LY2H)

Re: [Elecraft] KX2 Matching Power Amplifier

Nice idea! Before Elecraft steps-in to this PA market, I am using with great success and pleasure the Chinese MiNiPa50,:) AT 5-6 W in from the Kx2 it yealds clean and healthy 45-50 W output on the 80-20m bands and around 40W on higher bands. 6,6A current consumption at 13-14V. No 6 m , no ATU

Re: [Elecraft] Amber display for the K2?

I have a Pace de-soldering tool so taking off the display is not really an issue, but agreed it would have been easier before the display was installed. As for the diffuser, If needed I have a CNC mini mill so I could cut a piece of Plexiglass and I have a nice sample pack of photography gel

[Elecraft] KX2 Matching Power Amplifier

I'm enjoying my new KX2 transceiver! I'd like to see Elecraft make a matching RF amplifier with about 35 watts output with 5 watts in. Include an antenna tuner. Same size and shape and style as the KX2. Leave out the SWR/wattmeter and the antenna switch. Use a manual bandswitch if it will

[Elecraft] KPA500/KAT500 For Sale

I have a KPA500/KAT500 for sale. Includes interface cable that goes between both units and a USB/serial cable for each unit. I have the original shipping boxes. $2300 shipped USA only. I accept paypal add 3%. More info here: https://swap.qth.com/view_ad.php?counter=1320456 Rich - N5ZC

Re: [Elecraft] Amber display for the K2?

I'd never really thought about the colour, but I think it is basically the natural colour of the combination of liquid crystal and polariser. It's not the narrowband green that you would get with a green LED. Especially if you add in the fact that white "LED"s are really narrow band blue LEDs

Re: [Elecraft] Amplifier wishes

Agree! Vy 73 de OZ1CCM, Kjeld -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Walter Underwood Sent: 5. april 2017 22:45 To: Elecraft List Subject: Re: [Elecraft] Amplifier wishes That could be handy. The bypass circuit could include a sensor