Re: [Elecraft] OT (sort of, but they use all Elecraft gear): Baker Island

Hi Eric and all, The kh7z.net link doesn't work for me. It seems to reach the site, but then times out trying to connect. Anyway, the message you quoted is also present on the Facebook site. I don't like Facebook but unfortunately that seems to be the choice of current DXpeditions. AB2TC - Knut

Re: [Elecraft] How to change K3 COM port to a high number (to avoid N1MM/u2R problem)

On 6/28/2018 10:00 AM, hb9brj wrote: > When dealing with COM ports created by USB devices, these 2 utilities out of > Uwe Sieber's kitchen have helped me a lot: If one is using a modern Windows OS, the Device Manager Port advanced settings do that as well, able to set COM ports up to COM256. 73

Re: [Elecraft] OT (sort of, but they use all Elecraft gear): Baker Island

Hi Andy and all, Good for you, congratulations on nailing them on 160m. It looks like even on 20m they are at their best between midnight and 4am EDT. I have resigned myself to some sleepless nights in order to nail them. For me it's an ATNO. The propagation forecast site linked to on their web

Re: [Elecraft] KAT500 Macro via the Kpod

Hi Dany, 1.1Mixing Transceiver and Panadapter Commands A single macro sequence of Programmer’s Commands can control both the transceiver and its panadapter. That is, K3S/K3 and P3 commands, or KX3 and PX3 commands, can be in the same macro. Mixing both K3S/K3 and P3 or KX3 and PX3 commands

Re: [Elecraft] KAT500 Macro via the Kpod

OK for KAT500 but in terms of sending macros to the P3 via the Kpod ? Dany VE2EBK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] OT (sort of, but they use all Elecraft gear): Baker Island

For one data point, when I got up for other reasons this morning at 2:20 a.m., I turned on the radio, as I need KH1 on 160. They were very solid copy on 1822.5, and easy to work, using my K3 and KPA500, with only an inverted vee for TX and RX. I was surprised that they were solid copy, as

[Elecraft] [K3} Factory upgrade to K3(s)

If I remember correctly, the new synths also fix some operating limitations of the K3 in high-speed QSK, which was my principal reason for making the switch. Receive recovery time seems shorter. And I believe they extend receiver usability in VLF from 500 down to 100 Khz or so, for 220M.

Re: [Elecraft] OT (sort of, but they use all Elecraft gear): Baker Island

Also look at: http://kh7z.net/ This appears to have the most real time official info. They are running all K3S transceivers and KPA500's on all HF bands except 160, where they are running a KPA1500. From kh7z.net : A Rough Night -> Standby for Uploads – Weather: 1, Operation: 0 June 28, 2018

Re: [Elecraft] An OCD thought about the KAT500

No, four 7/16”, same height feet so it is level. Same as the adjacent SP3. It looks very good this way. K9JRI > On Jun 28, 2018, at 13:58, hawley, charles j jr wrote: > > Not two tall feet on the front of both boxes and two short feet on the rears? > > Chuck Jack > KE9UW > > Sent from

Re: [Elecraft] An OCD thought about the KAT500

Not two tall feet on the front of both boxes and two short feet on the rears? Chuck Jack KE9UW Sent from my iPhone, cjack > On Jun 28, 2018, at 12:15 PM, Michael Blake wrote: > > A perfect solution is at hand. I had two left over rear rubber feet from a > KPA500 replacement bottom cover

Re: [Elecraft] KAT500 Macro via the Kpod

Someone said that they had two pods. I wonder about using two on the same K3...button addresses issue...cable in parallel? Is the data open collector active low? Maybe he had two K3s. Chuck Jack KE9UW Sent from my iPhone, cjack > On Jun 28, 2018, at 11:47 AM, "d...@elecraft.com" wrote: >

Re: [Elecraft] OT (sort of, but they use all Elecraft gear): Baker Island

Hi all, Just one more message to this thread. As with the Bouvet expedition it looks like all the action is in Face book: https://www.facebook.com/groups/1994732637472703/?pnref=story You can read all postings without joining Facebook (I have severed my connections with them). AB2TC - Knut

Re: [Elecraft] An OCD thought about the KAT500

A perfect solution is at hand. I had two left over rear rubber feet from a KPA500 replacement bottom cover kit and I found that they will mount using existing screw locations on the bottom of the KAT500. Using these feet makes the KAT500 match perfectly with the height of the SP3 that it is

Re: [Elecraft] KAT500 Macro via the Kpod

That was what I was afraid of Dick. Thank you very much for the confirmation. Michael Blake k9...@mac.com > On Jun 28, 2018, at 12:47 PM, d...@elecraft.com wrote: > > It cannot. The ACC cable caries a very terse form of the K3's VFO frequency > on AUXBUS and

Re: [Elecraft] How to change K3 COM port to a high number (to avoid N1MM/u2R problem)

When dealing with COM ports created by USB devices, these 2 utilities out of Uwe Sieber's kitchen have helped me a lot: COM Port Manager by Uwe Sieber: https://www.uwe-sieber.de/comportman_e.html COM Name Arbiter Setter: https://www.uwe-sieber.de/misc_tools_e.html (scroll down on page) 73,

Re: [Elecraft] KAT500 Macro via the Kpod

It cannot. The ACC cable caries a very terse form of the K3's VFO frequency on AUXBUS and the four band lines. Macros come via the RS-232 serial port. What you might try is a cable from the KAT500 "tune" connector to the K3's straight key line, then use the KAT500 ATU TUNE button to key the

Re: [Elecraft] 2m in K3S?

None of that precludes installation of the 2M module. Grant NQ5T K3 #2091, KX3 #8342 > On Jun 28, 2018, at 8:52 AM, MaverickNH wrote: > > When I ordered my K3S I got the 2nd receiver, general coverage and message > recorder cards. Does any option added preclude install of the 2m option? I’m

Re: [Elecraft] [K3] factory upgrade to K3(s)

Hey, at least it is not "K3 Pro" or "K3 Mark IIG" k4ia, Buck K3# 101 Honor Roll 8B DXCC EasyWayHamBooks.com On 6/27/2018 7:12 PM, Fred Jensen wrote: Why not adopt the grammar of the Lao [and Thai] languages which have no plural forms.  It would be K3S, two K3S, three K3S, one hundred K3S

[Elecraft] 2m in K3S?

When I ordered my K3S I got the 2nd receiver, general coverage and message recorder cards. Does any option added preclude install of the 2m option? I’m thinking to try 2m WSPR and FT8, as limited as those may be - will these work with the 2m option added to the K3S? Bret/N4SRN -- Sent from:

[Elecraft] KAT500 Macro via the Kpod

I have not been able to determine if a Macro can be sent from the K3s to the KAT500 via the AUX cables. My goal is to send the following commands: SWH16;DE255;T; Which are intended to put the K3s in “Tune”, wait 255 ms and the put the KAT500 into the “Tune” mode. These are to be sent via the