A cough switch sounds like a great idea, but a bit low tech. K3 users
are mostly familiar with the Tx Gate function that blocks audio below a
threshold level to reduce background noise. Would it not be possible to
recognise audio input above a certain pre-settable level and have that
also
This isn’t a bad idea. It’s the primary reason I normally don’t use VOX —
especially with a headset mic, when you can’t turn away from the microphone for
a cough, sneeze, or worse. With a headset, I most always use a handheld PTT
switch or foot switch.
In the days I had a substantial AM
I received the Elecraft July Newsletter tonight. It supposedly contained a
K4 Update but the only thing I saw in this “update” was a reference to a
talk that Eric will be giving in early August at the Virtual Ham Expo where
he will give the actual K4 Update. Did I read that wrong? Will we be
Yes, and the 0.1 mA was with the rig in transmit due to the ammeter across
the contacts. ;-) If it doesn't come close to these values look for a
corroded jack or an open connection on the jack.
On Tue, Jul 28, 2020 at 6:19 PM Don Wilhelm wrote:
> Are you certain you have connected to the PTT IN
That is fantastic! Can it be added to K3? I would love this feature.
73
Josh W6XU
Sent from my mobile device
> On Jul 28, 2020, at 6:59 PM, John Simmons wrote:
>
> Stolen from Facebook:
> Programmable PTT so that when using VOX on SSB, the PTT functions as a mute
> (cough) switch
>
> --
Stolen from Facebook:
Programmable PTT so that when using VOX on SSB, the PTT functions as a
mute (cough) switch
--
73,
-de John NI0K
https://www.qrz.com/db/NI0K
__
Elecraft mailing list
Home:
Hi Eric,
My PTT jack has 4.9 volts when unkeyed.
This is certainly a mysterious problem... If your microphone PTT
works then the electronics in your K3 is working properly.
As far as I know the microphone PTT and PTT jack on the rear of the
K3 are connected together! In a pinch it
Are you certain you have connected to the PTT IN jack. If you just felt
your way behind the K3, you could have plugged into the KEY OUT jack
instead.
Make Jim's check on the voltage at the other end of an RCA cable, but as
an extra step, short that RCA cable and see if it lights the red TX
4.98v and 000 mA
On 7/28/20 3:50 PM, Jim Rhodes wrote:
When I check my PTT in port it shows about 4.75 V and 0.1 mA at the
other end of an RCA cable. What does yours read?
__
Elecraft mailing list
Home:
When I check my PTT in port it shows about 4.75 V and 0.1 mA at the other
end of an RCA cable. What does yours read?
On Tue, Jul 28, 2020 at 5:33 PM kg6mzs wrote:
> Yes, when connected to the front panel jack, the PTT in the Kenwood
> MC-60 works just fine.
>
>
> Eric KG6MZS
>
>
> On 7/28/20
Yes, when connected to the front panel jack, the PTT in the Kenwood
MC-60 works just fine.
Eric KG6MZS
On 7/28/20 2:28 PM, donov...@erols.com wrote:
Does the PTT in the microphone connector work?
I have the below for sale as a set.
Original cost:
KXPD3_KX3 Precision Iambic Keyer Paddle $169.95
KXPA100 100 W External Amplifier-Modular Kit (incl. DC power cable)
$1,039.95
PX3 Panadapter Kit $659.95
KXBC3_Internal NiMH Charger / Real-Time Clock (Kit) $89.95
KXFL3_KX3 Dual-Passband Roofing
Does the PTT in the microphone connector work?
- Original Message -
From: "kg6mzs"
To: "Mike Harris" , elecraft@mailman.qth.net
Sent: Tuesday, July 28, 2020 6:17:47 PM
Subject: Re: [Elecraft] Foot Switch Doesn't Work
Hi Mike,
Thanks for the reply. K6MKF also suggested that. The
You can see my message below. I think all the threads on this and responses are
here.
http://elecraft.365791.n2.nabble.com/K3S-IF-signals-seen-in-P3-and-NaP3-but-nothing-heard-td7653733.html
In any case, though I think I had to do this a couple times, in the end that
last time combined with a
I currently have a new, never used, hardrock 50 cable set for the kx3/2
radios. This is the two interface cables and the db9 pcb with the jacks for
easy hookup. Asking $25 includes shipping.
Contact me off line kthre...@gmail.com if interested.
Thanks for reading
Barry
K3bo
Hi Mike,
Thanks for the reply. K6MKF also suggested that. The shorted RCA
jumper placed in the PTT IN jack also does not key the K3, so it is
looking like it is something under the hood of the K3.
Thanks again,
Eric
KG6MZS
On 7/28/20 10:40 AM, Mike Harris via Elecraft wrote:
I use a
I use a donated Heil FS-3 foot switch plugged into PTT IN and it works
perfectly.
Try plugging a short circuit RCA plug into the K3 and checking if it
keys or not. The only other RCA socket in that line is KEY OUT to the
linear!
Regards,
Mike VP8NO
On 28/07/2020 13:11, kg6mzs wrote:
On 7/28/20 at 12:21 PM, maxr...@gmail.com (Bill DeVore) wrote:
Make sure you save a current config file before doing anything
as DRASTIC as an EERint.
Note that saved config files may be poisoned. Here's an email I
meant to send to the list, but ended up just sending to NR4C:
I had a
Thanks to all who suggested a solution! Most of the hams on this list could
easily work for the engineering or design departments at Elecraft. Sadly I am
not one of them. I didn’t realize the mistake I was making when I did a EEinit
on my K3S without a current config file.
Fortunately Elecraft
Hello All,
I've connected a Heil foot switch to to rear panel PTT In RCA jack and
it doesn't key my K3.
I searched the archives here and found that Don W3FPR had suggested
testing the foot switch of another unfortunate, Dick K9OM, who suffered
the same problem. This thread went
On 2020-07-28 8:54 AM, Eric Norris wrote:
> Would one of N6TV boxes work?
No, one would still need the RJ45 cable to connect to the ARI-500.
However *if one had the necessary documentation*, it should take
less than 10 minutes with a soldering iron to replace the RJ45
connector on one end of
You don't hear VFOs, you hear receivers.
When the subRX is off, the only receiver you can hear is the main receiver.
The main receiver's frequency is always controlled by VFO A, so with the
subRX off you are always listening on the VFO A frequency (you can press
and hold the REV button to swap
Would one of N6TV boxes work? I have waited a year for mfj parts...just
sayin'
73 Eric WD6DBM
On Tue, Jul 28, 2020, 4:28 AM K4PX K4PX wrote:
> So MFJ/Ameritron in Mississippi and all dealers are out of the Cable #
> RJ-DB15HE to interface the ARI-500 to the K3. MFJ/Amewritron does not seem
>
So MFJ/Ameritron in Mississippi and all dealers are out of the Cable #
RJ-DB15HE to interface the ARI-500 to the K3. MFJ/Amewritron does not seem
to know when they will be back in stock. I ordered one from the
MFJ/Ameritron website and paid for it then immediately got an email saying
it was
24 matches
Mail list logo
