This begs the question: If I "caused" the outage, how is it possible my own
internet never went out? They claim they get a lot of complaints about
customer's internet dropping out, but don't realize I WAS THE ONE making half
those complaints! It drops constantly, all hours of the day and
On 8/6/2020 3:35 PM, Gwen Patton wrote:
This is precisely why we don't have Comcrap and instead have FIOS. We had
constant trouble with Comcrap, and almost ZERO problems with Verizon.
Wish I had that option, but I'm lucky to have a POTS line here in the
Santa Cruz Mountains. No cell coverage
This one is going to be tough, because they aren't likely to give you the
details you would need to know. Your post suggests that you have been
disconnected. Get on 20 meters at legal limit all day, see if he comes
back. If so, it is almost certainly their problem. If not, the problem is
We have 40-year-old, squirrel-chewed, waterlogged cable in our
neighborhood. Lots of unterminated connectors too. COX has spent
nothing to maintain it. Switched to FIOS and problems gone.
At the office, we lose Internet every time it rains. I swear Comcast is
using the old Civil War
This is precisely why we don't have Comcrap and instead have FIOS. We had
constant trouble with Comcrap, and almost ZERO problems with Verizon. The
only issue we ever had was when we decided to cut the cord on the landline
and TV. We never watched the TV anymore, and the only callers on the
Not to mention being completely baffled about why (or even the fact that) a
transmitter's PA tube (a what?) plate current should be dipped rather than
maxed.
Ted, KN1CBR
(remembering his 1956 DX-20 and 1958 Viking Ranger)
--
Message: 3
Date: Wed, 5 Aug 2020
On 8/6/2020 2:32 PM, eric norris via Elecraft wrote:
My house is 65 yrs old, none of the outlets have grounds, not even the
bathroom. The entire kitchen is on one circuit, etc, etc.
Before I call the Comcast supervisor, I'm hoping for some advice from the group.
While the house is probably
Eric:
You've just discovered one of the reasons that Comcast has the
reputation of being "the most hated corporation in America."
Your chances of getting any cooperation from Comcast are practically nil.
I had a similar problem with Comcast some years back.
I finessed the problem by
I do not have any chokes or ferries and have the beam on a Glen Martin on the
roof. Shack on second floor and cable modem & router in shack. Hard wired
access point and gig switch in living room. No issues.
I’d ask the cable tech to show you that you are causing the interruption.
Coordinate
Dear Gang:
While looking at Europe banging in on 20m FT8 this morning, I switched over to
CW, cruised the band, then called CQ DX for a while. An hour later, a Comcast
(Xfinity) technician was knocking on the door (no mask) claiming I was knocking
out service to 600 customers (he said he had
Thanks!
Links provided by John, KC7DRI provided enough info for me decide I
did not need the enhancements. I run two LP-Pan SDRs off the first
IF's of my K3 main and sub-receivers in diversity mode to provide
dual IQ streams to my computer so having an internal soundcard is no
use. The
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Does anyone know if Rose is still making the covers and cases for the Elecraft
K3s? I’ve sent a couple of email with no response over the last two weeks. Hope
she is OK.
Thanks,
Michael
KK6RWK
__
Elecraft mailing list
Home:
Richard,
The components that could be damaged with J7 in place are a few in the
automatic power on circuits. Move the jumper to J8 and with the power
switch in the non-activated position and the K2 to XV control cable in
place, see if it turns on when you select the 144 MHz band. If so, no
See what's going on inside your KXPA100 Amplifier!
A great way to help protect your investment!
.
Newest Digital Display Unit for the KXPA100 displays these crucial reading:
.
1. Power amplifier's heat sink temperature
2. Power amplifier's voltage supply voltage
3. Power amplifier's current
I have the following items for the K2 and K3 radios for sale:
1. KIO2 Aux I/O Module for K2, unbuilt in original package. $60 shipped
CONUS
2. Same as item 1, KIO2 Aux I/O Module for K2, unbuilt in original package.
$60 shipped CONUS
3. KIO3 I/O Module for the K3 transceiver. This item
Problem solved. I had not set up a password in the for the host on the main
pc copy of the remote software and then had not entered a password in the
remote notebook copy of the software. Once I did that I am now able to
control the KAT500 from the remote notebook computer.
73 Paul w2eck
On
Hello,
I have recently bought a XV144 transverter, which was used on another non
Elecraft Rig. I followed the setup for use wit a KS however did not notice that
thee was a soldered jumper on J7. Looking further into the manual I see that
using the K2 wit the Transverter J7 shorted can cause
I have installed the KAT500 software on both my main shack PC and on to a
Win10 Notebook I use for remote ops. I want to be able to change antennas
on the KAT 500 from the Notebook PC. So I start the Remote software on the
shack PC, configure the Host data and then connect which it does. Then
S/N #3095 (Mfd May 23, 2009)
1. KRX3 HIGH-PERFORMANCE SUBRECEIVER
2. KAT3 100-WATT AUTOMATIC ANTENNA TUNER
3. KIO3BUPKT KIO3B Upgrade Kits USB Cable to computer, 6-12M Pre-amp
4. KSYN3A SYNTHESIZERS Upgrade including one for the sub-rcvr
5. KPA3 Internal 100 W Upgrade
6. Standard 2.7 kHz 5 pole
I as well have a K4 on deposit and think a "get it working" 5-10 page
instruction would be really nice, as well as a searchable complete manual.
Guessing youtube videos will come with time just as it did on the K3. Can
hardly wait for the K4 - maybe a surprise under the tree.
Thank you Ken
Anybody got a spare cable to run from K3 to Expert 1.3K-FA they would like
to part with?
73,
Joe
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I do have a K4 on order, and I agree with Andy, I'd much rather have a
searchable pdf manual than a video!!!
Thanks Elecraft for the fine radios that I now own, and the coming K4!
Gordon - N1MGO
On 8/5/2020 20:12 PM, Andy Durbin wrote:
I transitioned, with a 40 year gap, from an AR88D and
23 matches
Mail list logo
