Fan noise?
On Fri, Jun 3, 2022, 23:11 wrote:
> Why?
>
>
>
> w2irt.net wrote:
>
> if it keeps the amp far away from the shack I'll be happy.and so
> will
> the XYL .
>
>
>
> - pjd
>
> __
> Elecraft mailing list
> Home:
Yes, the KPA1500 will drop 10% of the output, as it warms up. 1500 drops
to 1350, so you have to compensate with the drive.
I'm told this is typical of all solid state finals (my KPA500 did likewise).
If you're running the station remotely; bump up the fan speed to slow
the drop (or wear
I note my KPA1500 drops power at its temperature rises...
Using FT8, so a relatively high duty cycle.
Say I start at a heat sink temperature of 27 C, and 1,000 watts out; by
the time the temperature is at 65 C, the power has dropped to 893 watts out.
I have a couple of questions about this
Why?
w2irt.net wrote:
if it keeps the amp far away from the shack I'll be happy.and so will
the XYL .
- pjd
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
On 6/3/2022 1:26 PM, li...@w2irt.net wrote:
Getting the molded plug downstairs will be a PITA, but I guess I can enlarge a
couple of the ½” holes
Industrial electronics vendors like Arrow, Digikey, and Newark sell
DE-DB connector inserts and shells, it should be possible to find cable
with
So I did a bit of measuring today. It looks like I only need somewhere around
10 to 13 feet of DE15 extension. Digi-Key sells the 15’ version for $21 (plus
shipping). A bit spendy, but if it keeps the amp far away from the shack I’ll
be happy…and so will the XYL . Getting the molded plug
Yesterday, I finally took the cover off my KPA-1500 power supply, which
has been sitting on the carpet behind my desk for 2 1/2 years. I have a
shedding dog and am not particularly fastidious, so I was worried about
diminished cooling. I needn't have worried - the interior of the supply
On Thu, Jun 2, 2022, 11:24 PM wrote:
> *Just so I’m clear on the concept, you’re suggesting taking my existing
> AUX cable from the Y-box to the amp on the desk, and adding a DB-15
> straight-through extension to it, and connecting the far end of that
> extension into the relocated KPA-1500 in
I actually have a currently-unused run of network cable that will reach the amp
when it's relocated, on a home run from the main gigabit switch. It's how I
used to feed my old weather station Windows PC before I went to an RPi about 6
or 7 years ago. I can't tell you the last time that computer
From: Bob Wilson, N6TV
Sent: Thursday, June 2, 2022 10:27 PM
To: Peter W2IRT ; Elecraft Reflector
Subject: Re: [Elecraft] Relocating my KPA-1500 - need cable
On Thu, Jun 2, 2022 at 6:28 PM mailto:li...@w2irt.net> >
wrote:
Not sure what you mean by “set drive power” this is something I
10 matches
Mail list logo