I have a K2 that is set up to use the Kenwood MC-43S Microphone. Since
this rig is now my base station I would like to change the microphone
setup. I would like to have a mic on a boom with a foot pedal PTT
switch. I'm a complete noob when it comes to microphones and their
different types. I have
This evening I tried to get into the menu on my K2 and pushing or
holding the MENU/EDIT button does nothing at all. When I press the ANT
1/2 Button it switches from Antenna 1 to Antenna 2. However, when I
hold the button to tune with the internal ATU the display LCD just
shows Atu and the bar
are not
recommend.)
For me, 5 watts with FT8 is more than adequate.
Aaron K5ATG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
What is the recommended highest power level for a QRP Elecraft K2 to
operate on digital modes like FT8, JT65 etc, without blowing the PA's?
--
'72
Aaron K5ATG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
. Is
there a way for me to check this without having to take the K2 apart?
--
'72
Aaron K5ATG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
the part that had broken off was missing so I could not
glue it back together. I was wondering if anyone has an old MC-43S
that is good for parts where I can buy to repair it.
Aaron K5ATG
__
Elecraft mailing list
Home: http://mailman.qth.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
a broken MC-43S mic for parts?
Aaron K5ATG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
the PA's. I would appreciate any ideas as to what may be
the problem.
Aaron K5ATG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Thanks for the info Don.
On Mon, Apr 20, 2020 at 2:47 PM Don Wilhelm wrote:
> When do you mean? There was no text in your post. Did you send in
> HTML? If so, mailman would have stripped it out - you must use plain text.
>
> The K2 was initially designed and released to Field Testing in
I am having a little trouble here. I have a KX3 that I'm trying to setup
for FT8 using WSJT-X v1.8.0. I'm using a Signalink USB. My operating system
is Linux Mint 18.3
I'm not finding the correct settings for it to work right. I can get it to
decode sometimes. I can get the KX3 to transmit but I
Is it possible to send CW by keyboard with the PX3? I have a neurological
issue that prevents me from using a key or paddle.
Aaron K5ATG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Thank you everybody, the issue has been corrected.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
The BNC Connector on my KX3 has become loose, is there a way to repair it?
Thank you
Aaron K5ATG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
that
need to be replaced?
Thank you
Aaron K5ATG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
the hardware. MARS requires frequency
accuracy/stability to be +/- 20Hz of center frequency on assigned channels
for transmit.
Is this possible with the KX3? If so how?
Aaron K5ATG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
I am in the process of learning CW and I am having a little bit of issue
with my KX3 on decoding CW. I am wanting it to be able to decode CW on TX
only so I can work on sending. By pressing the DATA button I selected TX
ONLY and I have the power setting at 0.0 watts into a dummy load. I am
using
I'm running PSK31 on 20 meters with my K2 and FLDigi. At any power level
the display reads HI Cur every time I go to transmit. I'm not sure if I
have something set wrong or what.
Thank you
Aaron K5ATG
__
Elecraft mailing list
Home: http
it
and everything is still locked. I unplugged it and again it is still
locked. The decimal point is not flashing. I looked in the K2 Manual and
could not find a place where I could resolve the problem. Does anyone have
any ideas?
Thank you
Aaron K5ATG
Does anyone know of any detailed instructions on installing the KX3 Utility
on Linux Ubuntu?
Aaron Scott K5ATG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I'm wondering if I am missing something. I'm trying to run WSPR with my K2.
I'm using a Signalink USB and have the transmit set at 140971 and receive
at 14956 (as per WSPR instructions). My PC clock is in sync with the WSPR
program, and I have the AF Gain at about 1 db. I have it set at 20%
I recently installed the KAT2 in my K2. Using a 20 meter inverted V dipole,
it was working great with no problems. Then I tried it out on a end fed
antenna and it also tuned it up. Then I switched back to my Inverted V and
every time I try to tune it up I get LO P on the display. I looked it up
24 matches
Mail list logo
