My KX3 and key have been sold. Thanks!
73,
Arlen - AA7F
> On Aug 31, 2015, at 12:11 PM, Arlen Fletcher <arlenfletc...@mac.com> wrote:
>
> I’m selling my KX3 w/ Begali Adventure paddle. This is a great turnkey SOTA
> system!
>
> I am the original owner; I pu
I’m selling my KX3 w/ Begali Adventure paddle. This is a great turnkey SOTA
system!
I am the original owner; I purchased it in March 2014. It is in mint condition
and has been used very infrequently. 100% non-smoking environment. It operates
normally - I have had no problems with this radio at
The KPA500, ZN5 Key, and the P3 have all been sold pending funds.
On Aug 20, 2015, at 8:33 AM, Arlen Fletcher arlenfletc...@mac.com wrote:
I’m selling my K3/100 (S/N 81xx), P3 (S/N 31xx) and KPA500 (S/N 6xx) as well
as some other misc equipment. Continental U.S. buyers only please! All
The KPA500, ZN5 Key, P3, AL80B, and LP-100A have all been sold - pending
payment.
On Aug 20, 2015, at 8:33 AM, Arlen Fletcher arlenfletc...@mac.com wrote:
I’m selling my K3/100 (S/N 81xx), P3 (S/N 31xx) and KPA500 (S/N 6xx) as
well as some other misc equipment. Continental U.S. buyers
The P3 has been spoken for.
Thanks.
Arlen - AA7F
On Aug 20, 2015, at 8:33 AM, Arlen Fletcher arlenfletc...@mac.com wrote:
I’m selling my K3/100 (S/N 81xx), P3 (S/N 31xx) and KPA500 (S/N 6xx) as well
as some other misc equipment. Continental U.S. buyers only please! All gear
I’m selling my K3/100 (S/N 81xx), P3 (S/N 31xx) and KPA500 (S/N 6xx) as well
as some other misc equipment. Continental U.S. buyers only please! All gear is
in proper working order and is from a smoke-free and animal-free home. The
KPA500 has had one previous owner, and the AL-80B was an “open
Well, that’s one way to do it. On my KX3 I simply turn the VFO B knob until the
display is showing PS voltage, or BT voltage, whichever I desire.
73,
Arlen - AA7F
On Jun 5, 2015, at 8:40 AM, Don Wilhelm w3...@embarqmail.com wrote:
Gareth,
The internal battery voltage does not increase.
I’m guilty of starting a thread similar to this one a couple of months back.
My K3 clock drifts and, being a newbie, I wasn’t certain whether it was within
spec or not. I learned that it is within spec - but I wanted something more
accurate - not because I NEED it, but because I thought it
Santa dropped off a TASCAM US-125M at my house yesterday. All is good, except
I'm perplexed with the settings on the K3. I'm using line out on the K3
(stereo) into the line inputs on the 125M. I have the line level cranked all
the way up to 100, but the input level on DM780 (Ham Radio Deluxe)
, COMPUTER and OUTPUT controls are about the 3:00
position.
My K3’s Line/Mic is set to 15.
Hope that helps…..
73, Jim / W6JHB
On Friday, Dec 26, 2014, at Friday, 5:42 PM, Arlen Fletcher
arlenfletc...@mac.com wrote:
Santa dropped off a TASCAM US-125M at my house yesterday. All
intended).
I haven’t been accused of being young in quite some time! ;-)
Wayne - I’ll check w/ customer support and see what they have to say.
73 all, and have a great Thanksgiving!
Arlen, AA7F
On Nov 25, 2014, at 8:28 PM, Arlen Fletcher arlenfletc...@mac.com wrote:
My K3's clock loses about 15
first started shipping K3s. Its in the normal range.
Regards,
Eric
elecraft.com
On 11/26/2014 1:53 PM, Arlen Fletcher wrote:
Thanks Wayne, Bill and Willis for your replies.
I suppose the battery could be bad - but this has been a consistent problem
since I assembled the Unit back
on the clock since we
first started shipping K3s. Its in the normal range.
Regards,
Eric
elecraft.com
On 11/26/2014 1:53 PM, Arlen Fletcher wrote:
Thanks Wayne, Bill and Willis for your replies.
I suppose the battery could be bad - but this has been a consistent
problem since I
My K3's clock loses about 15 seconds per day. It's not a big deal because it's
easy to update from the K3 utility, but 15 seconds seems like quite a bit.
Maybe my expectations are too high?
73
Arlen, AA7F
__
Elecraft mailing list
Thanks Don and David for spending all the CPU cycles on my problem! It turns
out the 2V drop was due to operator impedance - or a loose nut behind the
controls, etc., etc. I was indeed monitoring the internal battery voltage
instead of the external battery. {heavy sigh} So, now I’ll go back to
Greetings all!
My KX3 has the set of internal NiMH batteries and currently reads 9.9v while
idling (I haven’t charged the batteries recently). When I power the KX3 from an
external 12V SLA battery - which reads 12.2V on my Fluke DMM - the KX3 reports
10.2V while idling. I might expect the KX3
Hi Mark,
Thanks for the response!
I’m guessing that perhaps you’re considering that the voltage of the SLA is
sagging when it’s running the KX3. I wondered that too - so I measured across
the terminals of the SLA while it was powering the KX3. It still measured
12.2V, so it wasn’t sagging.
. The internal pack may increase slightly when the load is
removed if you are running from external batteries.
Sorry if as we say over here if I am teaching my grandmother how to suck
eggs :-)
73
David Anderson GM4JJJ
On 15 Aug 2014, at 17:34, Arlen Fletcher arlenfletc...@mac.com wrote
Greetings Elecrafters,
I’m new to the K3 (and HF in general), and I’m trying to sort out how to get
useful results from the Noise Blanking (NB) features.
I’m looking for strategies, tips, techniques, etc. for selecting the settings
for NB. With over 14,000 possible settings between the IF NB
A little number crunching of the results (because that sort of thing appeals to me...
(the XYL says, There's something seriously wrong with you.)) tends to support
the idea that the hardware is not the primary factor for this contest. The results below
are somewhat suspect in that only 'Radio
My KX3 is about a month old also, S/N 5989.
Arlen
AA7F
On Apr 25, 2014, at 1:57 PM, N1IX n...@n1ix.com wrote:
What is the latest serial number for the KX3. Ballpark ?
__
Elecraft mailing list
Home:
, a few segments are lit
(depending upon the noise level in the band). This seems backwards to me,
but this is my first HF rig, so maybe it’s supposed to behave this way?
Maybe I have some config setting messed up?
Thanks in advance for any light you can shed on this!
Thanks!
73
Arlen
in advance for any light you can shed on this!
Thanks!
73
Arlen Fletcher, AA7F
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
/data
to/from it on USB or any other media.
73
Arlen Fletcher, AA7F
On Mar 31, 2014, at 08:36 AM, WILLIS COOKE wrco...@yahoo.com wrote:
It may be worth mentioning that running XP for such Internet Applications like
Telnet, Email and downloading Logger Software are not as riskey as banking
the financial officer (XYL), so as soon as my
rich Uncle comes through I'll be placing an order!
73, Arlen, N7YIM
On Feb 20, 2014, at 12:25 PM, Arlen Fletcher arlenfletc...@mac.com wrote:
I'm about to pull the trigger on a K3/100 purchase (once the IRS returns the
interest-free loan I provided
I'm about to pull the trigger on a K3/100 purchase (once the IRS returns the
interest-free loan I provided to them in 2013). There are a LOT of options
listed for the K3 on the Elecraft site, and I'm a total newbie, so I'm
appealing for help from current K3 owners. I plan to chase DX primarily
26 matches
Mail list logo