sive piece of equipment,
there
could be something of better quality, if not, I apologize, we will
have to
live with these things.
See you in the bands!!!
Have a good weekend!
73,
Jorge
CX6VM/CW5W
El dom, 5 may 2024 a las 1:08, Dave (NK7Z) () escribió:
Jorge,
I can only go by what you said:
&q
kduckgo.com/?q=lightening+cone+of+protection=v314-1=images=images
If the cruiser was out of that cone, it could easily become a target for
lightening...
Prior to his passing, I knew Leonard Ball, he held the patent on the
LASER lightening rod, which is now used, alas, Leonard never saw the use
of it..
is the more
sensitive it becomes...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 5/4/24 21:21, Jorge Diez - CX6VM wrote:
Hi Dave
I have a panel like yours, each antenna
done more... That is unfair.
With respect to the weekend-- I hope to see you in the 7QP contest! I
will be on Sunday, but I fear the Sun will not assist much... Take care
my friend...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst
protection always rests with the device owner.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 5/4/24 16:36, Jorge Diez - CX6VM wrote:
Dave
I am not an engineer and I don't know
Jorge,
I would imagine if you approach Elecraft with that mindset, their
thoughts will be you should take care of your own lightening protection.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical
existing
telnet connections are dropped.
Not a big deal, but if you are keeping a list of things to do, (as I am
sure you are), you might consider adding that to it.
Thanks for your consideration of this...
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical
need that one), and then take the third one and wrap 10 to 15
turns of your 12 volt power around it and put it close to the K4. That
will end most of the common mode issues...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst
See my response in the K4 groups here in groups.io.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 2/3/24 14:51, mza...@gmail.com wrote:
Hello everyone,
Sometimes I hit the wrong
Was intended as direct email, not list email... Sorry...
Jim please answer via direct email.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 1/7/24 05:40, Dave (NK7Z) wrote
validity to this?
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Hello,
I am posting this for a friend, that has sold his K3, and is selling his
P3, but not a member of this group, cut text from him follows:
=CUT
P3 for Sale, in 9 out of 10 condition, 100% functional, used in a
Hi Chris,
I have some articles on this subject at:
https://www.nk7z.net/category/info/rfi-mitigation/
I would recommend the one on using an SDR, as an RFI site survey tool as
a starting point for our friend.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL
Forwarding for a friend, his contact info is in the email below. I
deleted the photos he had attached.
Forwarded Message
Subject:Elecraft P3 Panadapter w/ SVGA add-on
Date: Thu, 7 Dec 2023 17:50:22 -0800
From: Nelson Farrier
To: Dave Cole
In 9 out of 10
Forwarding for a friend... I deleted the photos he had attached.
Contact info in the email below.
Forwarded Message
Subject:Elecraft K3 100W High Performance 160-6m Transceiver
Date: Thu, 7 Dec 2023 17:50:28 -0800
From: Nelson Farrier
To: Dave Cole
In 9
. I buy the heavy
ones...
I then test them at home, both loaded and unloaded for voltage and RFI.
If good I use them, if bad, I recycle them. Most used PS at the thrift
stores are cheap, and the heavy ones are usually transformer based, and
RF quiet..
73, and thanks,
Dave (NK7Z)
https
Now you have done it...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 10/22/23 04:49, G3WPF via Elecraft wrote:
(though, to be fair, the amp has lasted for 10 years without
a rig other than a K line rig... So... THANK YOU for your work
in making the D a great rig!!
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 10/20/23 21:11, Wayne Burdick wrote:
Hi
Wayne,
A question for you on the HD module... What will that bring to the
party, the K4D does not support now? I have been amazed at how well the
K4D does with strong signals, and I can't really see how you could make
it a lot better... Is there more I am missing?
73, and thanks,
Dave
Just bought one off of Amazon...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 8/7/23 12:57, Henry Pfizenmayer via Elecraft wrote:
A few weeks ago I saw this discussion-and could
Andy,
Pitch out the highest, and lowest, and it looks fairly flat...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 7/26/23 11:00, Andy Durbin wrote:
I now have data for nine
, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 7/23/23 07:23, M Cresap via Elecraft wrote:
For my K4, the FT8 signal is clean with no more than 2 bars of ALC.
To be clear, the spurious responses I
Don't forget it is also used for the W2 wattmeters...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 7/15/23 17:17, Gary Hembree wrote:
I have no idea where you got your information
Wayne,
I suspect that after the software becomes more stable, and more folks
use the K4, it will replace the K3 for DX operations... The question
now becomes, will it fit in a RIB setup. DX is changing...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL
Context would be nice as well...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 5/25/23 15:25, Keith Trinity WE6R wrote:
Guys!
If you are replying to the DIGEST format, you must
Both what?
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 5/25/23 12:33, Thaire Bryant wrote:
At Hamvention Eric said this fall for both.
73
Thaire W2APF
On May 25, 2023, at 14
I am running 4 foot Cat6 cables, for my W2 watt meters, and am having no
issues.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 5/17/23 06:19, Jack Brindle via Elecraft wrote
Hi Steve,
See:
https://www.nk7z.net/k3/
for some actual test data, with plots of new vs. old synths... You will
need to decide if you are happy with your purchase.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director
Have you looked at the calibration setting in it yet? Not sure if it
can pull it that far, but that may be what is off.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 4/7/23 11:12
What machine gun did Tuska invent?
73,
Dave,
https://www.nk7z.net
On 3/19/23 12:55, Fred Jensen wrote:
Clarence Tuska was the other founder and original owner of QST magazine,
but HPM always gets all the press.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
Alan Bloom wrote on
Speaker has sold pending funds.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 3/7/23 10:50, Dave (NK7Z) wrote:
Hello,
Sold my K3, and got a K4, so I have an Elecraft SP3 for sale
DIRECT email gets it. PayPal,
or cleared check OK.
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
__
Elecraft mailing list
I agree... It would be nice of folks added a bit of context to their
replies. Far too many replies like, "clip the red wire", happen, and
without having the entire thread available it is impossible to follow...
73,
Dave,
https://www.nk7z.net
On 3/2/23 11:39, Edward Mccann wrote:
Missing the
, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 2/26/23 11:11, Dave New, N8SBE wrote:
Dave,
Any idea of what repair action they did?
73,
-- Dave, N8SBE
On 2023-02-24 14:31, Dave (NK7Z
Hi,
I had the exact same issue, with the exact same symptoms, sent it into
Elecraft, got it back, and it worked until I sold it.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 2
See:
https://en.wikipedia.org/wiki/Scancode
That covers this in far more detail than I can here... I got stuck
doing this while playing with my Genovation as well... :)
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst
Or paste in "Unformatted text"...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 2/17/23 13:14, kevin via Elecraft wrote:
If you want to copy and paste from the web it he
The AI has determined that it is the humans duty to get used to the far
more efficient method of writing, by the removal of spaces...
Saves time, saves space, and best of all saves CPU cycles... You stupid
humans need to realize that... Oh wait... Never mind, how can I help you?
73,
Dave,
Amateur, but I can't predict how much
worse... The K4D is remarkably tolerant of strong signals.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 1/18/23 11:53, Joseph M. Durnal wrote:
I
If you have a camera pointing at the amp, look for the "*" when you key
down...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 12/13/22 07:47, dave ingebright wrote:
This disease was covered on QRZ a while ago, see attached.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 12/6/22 13:19, Michael Carter wrote:
"Clearly case of stimul
Al,
Are you by chance running an end fed antenna?
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 11/23/22 05:59, Wes wrote:
I run a KPA500 all of the time; essentially, I run
is that I changed UPS batteries yesterday, because the
UPS only held for a second or so. It would not have held during this
power hit, had I not changed batteries...
In any case, the KPA500 is one well built amp...
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL
Got the email today... Paid for it today, 15 to 20 days away...
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
__
Elecraft
/had a K3, I am wondering if the K4D performs, worse, better,
or the same in that environment.
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
You might try running the same test with-- say 12 turns of cable on a
Mix31 FT240 core, on every cable leaving the transmitter.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 9/25
Then I believe the case, and everything connected to the case ground,
will become part of the antenna system.
73,
Dave,
https://www.nk7z.net
On 9/21/22 23:08, Wayne Burdick wrote:
So yes, it CAN be a fact that the coax feedline to the AX1 could be doing more
of the radiating than the whip,
Hi,
If you do decide to sell your K3S, I am interested...
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
__
Elecraft
Bill,
Please post your results between the two KAT tuners. If it is a
software issue, perhaps going back one version might be on the table.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical
Hi,
I had this exact problem, the problem gets worse with time... At least
mine did. I sent in my P3 to Elecraft repair, and got it back a month
or so later working...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst
paid shopping to Elecraft, and they have paid
shipping back to me. This does not seem out of line to me.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 8/1/22 12:50, rpu...@live.com
For manuals without hyperlinks, I use find... Not as good, but better
than nothing...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 7/24/22 17:09, Steve Wilson via Elecraft wrote
On the Elecraft groups IO list, someone posted a note that it would be 3
to 4 months before Elecraft could even issue an RSA...
That sounds very odd to me, as Elecraft has always been faster than that.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical
Make that 6/22, when it arrived.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 7/19/22 07:51, Dave (NK7Z) wrote:
Hi,
I sent in a P3 a few weeks ago, (arrived on 07/22), and am
Hi,
I sent in a P3 a few weeks ago, (arrived on 07/22), and am waiting for
the results. The last item I sent in an item for repair took only a few
weeks, so I am expecting to hear from Elecraft very soon. I'll post
when I do. Repair for me has been good.
73, and thanks,
Dave (NK7Z)
https
of antenna?
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 7/15/22 19:53, Peder Kittelson wrote:
When on 80 meters, the longer I hold the tune button down the higher the
SWR goes to the point
Hi,
Anyone using their K3 with MixW4? I am having difficulty in setting up
the software. CAT appears to work, (band changes etc., work fine),
however I can not get the K3 to drop into transmit. Works fine under
MixW3, same settings...
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
I have had very good results with Elecraft Support! Maybe a day or so
when I email them.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 6/14/22 16:04, John Paul Keon wrote:
I get
Thanks Joe!!
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 6/9/22 06:26, Joe Subich, W4TV wrote:
From the schematic there should not be an issue unless the K3/K3s
mic bias can't
Hi,
Has anyone here wired an Icom SM-2 to a K3 and had luck with this? Any
surprises in this?
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
Yes!
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 6/8/22 01:37, df...@darc.de wrote:
Should there be advertisings in a mailing list?
Am 07.06.2022 um 23:01 schrieb Keith
That is one of the reasons I am not going the nanoVNA route... I
suspect the P3 is a far better measurement tool.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 6/7/22 15:07, Jim
Jim,
Thanks for your answer! Also, thanks for your past work!!
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 6/7/22 12:13, Jim Brown wrote:
On 6/7/2022 8:04 AM, Dave (NK7Z) wrote
Al,
THANK YOU Also, thanks for the formula! :)
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 6/7/22 08:18, Al Lorona wrote:
According to Al, N1AL, "The effective band
then just divide that result by X, where X is selected
to bring the width of measurement to 1 Hz?
Thanks in advance for any help in this...
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical
Hi,
It looks like Elecraft service is ticking along well... I sent in a P3
for some minor work, about 3 weeks ago, and just got the bill and
shipping note from them. So the repair took 3 weeks! Glad to see this!
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
Thanks Andy, I can locate it from here... Having a bit more info will
help in seeing what needs to be checked!
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 5/20/22 07:55, Andy
Andy,
If you locate those changes I would be most interested... I have a
KAT500, no issues yet, but would like to verify my KAT has the changes
if they fix something.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director
tight, so I am sure
that is what happened. All is working now, and thanks to both Mike and
PE3HCG!
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 5/14/22 06:50, Dave (NK7Z) wrote
find nothing... It just looks like I have no IF input to the
just repaired P3.
Any ideas where else I might check on the failed P3? I am being very
careful to make ZERO changes to the K3, as it drives P3 number 2037 fine.
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer
Actually I am interested in the turn time for K3 repairs?
73,
Dave,
https://www.nk7z.net
On 4/25/22 16:02, rikoski wrote:
Why do you ask?
On Apr 25, 2022, at 5:37 PM, Jerrad Thramer wrote:
Rick,
Does the entire elecraft-owning world need to be updated on the status of your
repair order?
you are seeing in your setup.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 4/18/22 22:20, Frank O'Donnell wrote:
Over a period of time I've noticed an occasional error when
My mail client supports filters-- I build a filter for whatever the
subject de jour is, that has morphed. Then I direct that and that
subject only to the trash. Look at your filter creation within your
mail client.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 4/11/22 16:09, Rich Lim via Elecraft wrote:
FWIW the UPS “insurance” should be taken with a grain of salt. I had my K3
repaired by Elecraft
Jim,
Thank you for the reference to the post confirming the 5/50 watt issue!
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 1/16/22 06:27, Jim McCook wrote:
FYI once again. You
See:
https://mailman.qth.net/pipermail/elecraft/2022-January/288276.html
for a reference to the original post, which I can not locate...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
Hopefully someone remembers the thread title, I don't.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 1/16/22 04:52, KE8G wrote:
Hmm, I’ve never heard that 5 or 50 watts of power
If I remember correctly, 5 watts is a power level to avoid... As is 50
Watts. I believe it messes with the TX calibration.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 1/15/22
78 matches
Mail list logo