Hello Everyone,
I'm getting the following error codes on 80 meters, 160 and 40 are working.
I suspected the 80m antenna so I tried using a dummy load and I get the
same error codes. Reducing the input power does not help.
I've reloaded firmware 2.38.
Anyone run into this problem?
Ed W5TM
/elecraft.com/
On 5/1/2019 2:01 PM, Ed gilliland wrote:
Well I spoke too soon.
I still have a KPA1500 problem. I am not getting the LO GAIN FAULT
and I do have RF out but I cannot get 1500 watts output with 50 watts
drive.
I connected the KPA1500 to a dummy load and loaded the the latest
Okay Eric, thanks.
On 5/1/2019 17:31, Eric Swartz - WA6HHQ, Elecraft wrote:
Hi Ed,
I or one of our support engineers will contact you directly after we
review the config file you sent us. Most likely by either late today
or early tomorrow.
73,
Eric
/elecraft.com/
On 5/1/2019 2:01 PM, Ed
Well I spoke too soon.
I still have a KPA1500 problem. I am not getting the LO GAIN FAULT and
I do have RF out but I cannot get 1500 watts output with 50 watts drive.
I connected the KPA1500 to a dummy load and loaded the the latest
version of the KPA1500 utility.
With 20 watts drive the
problems. It doesn’t seem like any of the above if it occurs on all bands, but
it’s easy and a good start to a systematic diagnosis.
Victor 4X6GP
On 30 Apr 2019, at 5:35, Ed gilliland wrote:
My KPA1500 is faulting with a low gain alarm ration 6. This is with 23 watts
input 160-10 meters. Any
My KPA1500 is faulting with a low gain alarm ration 6. This is with 23
watts input 160-10 meters. Any advice?
Thanks, Ed W5TM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I am unable to put the P3 in "Fixed Tune Mode", the display remains
constant and the VFO A cursor moves across the display.
I'm sure that I have something configured incorrectly but haven't been
able to discover the error. I have a RS232 cable from the P3 PC port
and a RS232 port on the PC
Message: 10
Date: Mon, 15 Oct 2018 09:21:36 -0700 (MST)
From: n6hz
To:elecraft@mailman.qth.net
Subject: Re: [Elecraft] Elecraft P3 Bar Cursor
Message-ID:<1539620496239-0.p...@n2.nabble.com>
Content-Type: text/plain; charset=UTF-8
Hi Ed,
Are there magenta and green arrows toward the bottom of
My P3 cursors have disappeared. The menu selections are there but the
cursors do not appear when selected. I have the latest P3 firmware loaded.
Ed W5TM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Art,
I'm using two K3-to-KPA1500 cables back-to-back, no problems.
Ed W5TM
On 6/16/2018 13:40, elecraft-requ...@mailman.qth.net wrote:
Send Elecraft mailing list submissions to
elecraft@mailman.qth.net
To subscribe or unsubscribe via the World Wide Web, visit
On 4/4/2018 09:47, elecraft-boun...@mailman.qth.net wrote:
The results of your email command are provided below. Attached is your
original message.
- Unprocessed:
Ordered August 24, 2017, paid in full
Received March 30, 2018
On 4/4/2018 08:17, elecraft-requ...@mailman.qth.net
KPA1500 S/N 56
Ordered August 24, 2017 under Elecraft's early notification program, 43
minutes after Elecraft began accepting orders, paid in full
Received March 30, 2018
__
Elecraft mailing list
Home:
for "Prolific" in the list. Right click and
uninstall. Then reboot and reconnect the USB cable to the KPA1500.
If it's still not recognized, you may have a bad USB port on your amp.
73,
Bob, N6TV
On Sun, Apr 1, 2018 at 11:43 AM, Ed Gilliland <w5tm...@gmail.com
Message-
From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> On
Behalf Of Ed Gilliland
Sent: Sunday, April 1, 2018 4:19 PM
To: Dick Dievendorff <d...@elecraft.com>
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA-1500 s/n 56
Thanks Dick,
That's the f
!
73 de Dick, K6KR
-Original Message-
From: Ed Gilliland <w5tm...@gmail.com>
Sent: Sunday, April 1, 2018 14:19
To: Dick Dievendorff <d...@elecraft.com>
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA-1500 s/n 56
Thanks Dick,
That's the first thing I did Dick
at that time.
If you can’t get it quickly, contact Elecraft support, they probably have a
better checklist than I do.
73 de Dick, K6KR
On Apr 1, 2018, at 11:43, Ed Gilliland <w5tm...@gmail.com> wrote:
I received my KPA-1500 s/n 56 last Friday and have it on the air. All i
I received my KPA-1500 s/n 56 last Friday and have it on the air. All
is well with the exception of not being able to use the KPA-1500
Utility. I do not get a notification sound from the computer when I
plug the USB cable into the computer. I've reset the KPA-1500, tried
different USB
, 2018, at 6:33 PM, Ed Gilliland <w5tm...@gmail.com> wrote:
Any news on KPA1500 shipments?
Ed
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:El
from a reliable source that the first one(s) will ship tomorrow.
I have no idea how quickly the shipments can ramp up to full potential.
73,
Don W3FPR
On 2/5/2018 9:33 PM, Ed Gilliland wrote:
Any news on KPA1500 shipments?
Ed
__
Elecraft mai
Any news on KPA1500 shipments?
Ed
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
No power out
5W calibration fails
The error message "ERR PL-1" appears briefly when I change bands.
Thanks for the help.
Ed
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Just received a new HP ProBook 455 G3 with Windows 10 Professional. I've
been able to successfully install N1MM+ and the laptop will key my K3s If I
use the mouse and click on the function key that N1MM+ displays or if I
hold the laptop Fn key down and press one of the laptop function keys. Is
K3 s/n 342, still waiting on the KRX3.
Ed
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
selection.
Personally, I haven't seen this but I haven't listened specifically for it
either.
73,
Barry N1EU
Gary W. Hvizdak wrote:
On Fri 8 Feb 2008 at 01:07:35 EST, Ed Gilliland (W5TM) wrote ..
I'm have poor isolation between the transmit antenna (ANT1) and my
Beverage
(RX ANT IN). I have
24 matches
Mail list logo
