I have both the FT- 817nd ( since ten years) and the KX-2 ( since about
two years).
The '817 used to be an unbeatable champion in the QRP rigs class for many
years due to its versatility, all-band (160m -70cm) all mode features. It
travelled with me all accross Europe and did a great job in
..@mailman.qth.net <elecraft-boun...@mailman.qth.net>
> on behalf of Irma & Linas(LY2H) <irmalina...@gmail.com>
> *Sent:* Sunday, February 25, 2018 1:03 PM
> *To:* elecraft@mailman.qth.net
> *Subject:* [Elecraft] KX2 echo in the speaker
>
> Hello group,
>
> I have a bizza
Hello group,
I have a bizzair effect in my KX2. When I touch the chassis of the radio
each touch corresponds with the echo in the speaker. The radio is not
connected to the antenna, could run on the battery or the PS, the effect is
there. Touching also makes the Smeter bar move a bit.
Does
Hello, HNY!
Loking for practical info on wiring-up of the KAT500 PA to the any
third-party, non Elecraft PA, incl Home- Made?Is the PTT cable necessary
from KAT 500 to the PA?
Fixing the FAULT alarm while it is on?
Qru direct on this emale or to the group.
73 Linas LY2H.
Hello group,
I wouold like you to share your personal experience info on the setupping
,wiring and running the two? any tips welcome, like where'd you get the PTT
key line from for the KAT500 to switch?
As a trx I use the K3/ modified to S.
One antenna is balun end fed 43m LW. The other is R8
John,
I am an owner of kx2 for a few years. I am amazed by the quality of the kx2
speaker. For such a tiny radio with so little space for a speaker , it is a
very well designed construction of the back cover of the radio and the
speaker itself!
73 de Linas LY2H
On Fri, Sep 8, 2017 at 4:43 AM,
Hello folks,
I am looking for the practical , empyrical, real info based on the
individual measurements of the maximum Key-down time/temperature at the 10w
output of the KX2 before it drops down to 5 W issuing a message of "HI
TEMP". I would also like to learn about comparison of the KX2 stock
Please check the D1/D2 chain, replace if necessary . I had the similar
problem, Elecraft support advised me to do this.
More info and the schematics on my Facebook page LY2H.
73 Linas LY2H
Forwarded message --
From: Nr4c
To: IU6ASS
Hello,
8,8m could be a good length for your pole to tune from 40-6 m. It is
important to avoid the half wave lengths and its harmonics on the operating
frequency because it will produce a very high ( kiloohms) impedance which
normal tuner won't tune. Unless you go onpurpously for a 1/2 lambda
Thanks Wayne!
Pf1-Pf4 in the rev.2.75 works just great and makes my mobile operations so
much easier! I have assigned Pf1 to VOX, Pf2 to XIT, Pf3 to BKLIGHT, Pf4 to
DUAL RX ( that's more for fixed rather than mobile use).
I have yet to discover the sense of having two ATU Data Sets. Theoretically
Good news and thanks!
Looking fwd for this great improvement to be download-redy for the rest of
us.
I am a new (up to 2 months) KX2 user so the first things I found myself
missing is more Pfn buttons, at least 2. Now there going to be 4 of them!
So my first set would be PF1 =VOX, PF2= XIT,
No it doesn't, at least for the engineers who created this little tuner.
Please check the Elecraft T-1 FAQ, :)
*Q: What’s the highest power level the T1 can handle? Can I use my 30-40
watt amplifier?*
*A:* The T1 is rated at 20 W SSB/CW and 10 W FM/AM/digital modes. However,
to ensure that the
t Day!
> 73 Ron Wilcox KF7ZN
>
> On Thu, Apr 6, 2017 at 8:18 AM, Irma & Linas(LY2H) <irmalina...@gmail.com>
> wrote:
>
> Nice idea! Before Elecraft steps-in to this PA market, I am using with
> great success and pleasure the Chinese MiNiPa50,:)
> AT 5-6 W in
Nice idea! Before Elecraft steps-in to this PA market, I am using with
great success and pleasure the Chinese MiNiPa50,:)
AT 5-6 W in from the Kx2 it yealds clean and healthy 45-50 W output on the
80-20m bands and around 40W on higher bands. 6,6A current consumption at
13-14V. No 6 m , no ATU
George,
100% supportt! I've been thinking even to swap the KX2 knob with the
lovely-rubber-coated knob of the FT-817ND! Not sure yet if it is possible
at all, :). Surely, anything original from Elecraft would be of no
hesitations!
Linas LY2H
On 2017 kov. 30, kt at 17:47 George Sereikas
1. I support very mich the idea or the need , really, of an in-built
bluetooth rig control and audio I/o connection interface to a portable
devices. For if you have an iPad or an iPhone you can not connect them to
nothing and nothing can be connected to them by wires :). Yes, I have a
Pigtail
Dave,
Pretty much the same to my experience. I have the T-1 for some 10 years
and the KX-2 with the ATU installed for some 1 month, :). May be too early
to make judgements but both tuners were equally good in tuning the random
wire of some 9 m, also a 12m length vertical dipole fed by the 400
ASC RX;}
> F12 Wipe,{WIPE}
>
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
> Irma & Linas(LY2H)
> Sent: Wednesday, March 22, 2017 5:08 PM
> To: Elecraft@mailman.qth.net
> Subject: [Elecraft] KX2 on N1MM+
>
Hello group,
Is it correct that KX2 does not support the CW/PTT operation through the
DTR/RTS ports? I have tried it out on the N1MM+ logger with no success. It
does control the VFO, the band/mode change but no sending CW from the
logger nor switchin PTT. My K3 which has the menu item for the
As it reads in the manual these pins are reserved for the factory needs, :)
I wouldn't sugest connecting anything to it.
73 Linas LY2H
On 2017 kov. 19, sk at 12:32 kevino z wrote:
> I'm assuming some sort of test port. Not really evident. If someone knows
> please share...
Thanks everybody for a usefull info!
The US powerr plug seems working no problems with a normal travel adaptor
on my KX2 battery charger.
Shouldn't be a problem on this PS too.
73 de Linas ( LY2H)
On 2017 kov. 16, kt at 02:32 Bill Frantz wrote:
> My Pro Audio Engineering
21 matches
Mail list logo