some. The radio is in
perfect shape. It has sat on my desk, never taken portable :-(
Jeremy Cowgar
KB8LFA
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub
I did have a request for photos, so I took a few and uploaded them to:
http://jeremy.cowgar.com/kx1/
I have been wanting to give iWeb with my Mac a try, so I did so with
this site.
Jeremy
On Jun 23, 2006, at 1:40 PM, Jeremy Cowgar wrote:
I purchased the KX1 for portable use but never
The KX1 has been sold. Thank you for all the responses.
Jeremy Cowgar
KB8LFA
On Jun 23, 2006, at 1:40 PM, Jeremy Cowgar wrote:
I purchased the KX1 for portable use but never really got around to
using it, therefore I am going to sell the radio. I am attempting
to focus my extra hobby
Enjoyed putting my KX1 together and tuning around the bands but when it
comes to transmitting, I'm wonder if something is slightly wrong or no.
Power out:
13.5v: 40m = 3.8w (39ppv), 20m = 3.06 (35ppv)
9v: 40m = 1.32w (23ppv), 20m = 2.25 (30ppv)
The 9v 20m output is strange to me. Have checked
WHAT are the changes to R11 and R30 Everyone is referring to them, but
no-one has said what they are!!
I was reading past posts about the KX1 and stumbled across this post:
http://www.ac6rm.net/mailarchive/html/elecraft-list/2003-11/msg01045.html
*To*:
WHAT are the changes to R11 and R30 Everyone is referring to
them, but
no-one has said what they are!!
I was reading past posts about the KX1 and stumbled across this post:
http://www.ac6rm.net/mailarchive/html/elecraft-list/2003-11/msg01045.html
I also read quite a bit about
U9 should be a 6v regulator, no? 77L06. It's getting 13.8v and
outputting 7.96v in the Alignment and Test Part I. The manual states on
U3, pin 6 should be 6+/-0.25 v. Because of U9 being 7.96, so is pin 6.
Any thoughts?
Jeremy
___
Elecraft mailing
Sorry, user error with a bit of panic I don't know how I did it, but
I installed C10 (bottom of the board) into C38's position. C10 is a 10uf
electrolitic on the output of U9 to ground. That fixed it all, now I
just hope I didn't blow up U3.
Jeremy
KB8LFA
Stuart Rohre wrote:
Jeremy,
Jeremy Cowgar wrote:
Sorry, user error with a bit of panic I don't know how I did it,
but I installed C10 (bottom of the board) into C38's position. C10 is
a 10uf electrolitic on the output of U9 to ground. That fixed it all,
now I just hope I didn't blow up U3.
Ah, I think I'm alright
Mike Morrow wrote:
... the KX1 wins handsdown for backpacking...
Strange! Before the KX1 came out, the K1 was generally acknowledged as the
best multi-band backpacking rig available. It is no less suitable for that
task today.
When you go out and spend $200.00 on a 1 person tent
I am looking for a backpack rig (3-5 day backpacking trips). I know the
KX1 is more portable but I am wondering specifically about the receiver
performance between the two. Also in regards to the K2. I know the K2 is
a better reciever but I'm coming from one disappointment. I purchased
another
Thanks to so all those (many, many) who have responded. Got a lot of
positive feedback on both. I purchased a KX1 today.
Thanks!
Jeremy
KB8LFA
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
This was also given which seems quite good if you are a reader. Well,
it's good even if your not a reader, but you know what I mean.
http://break.org/gisle/HamRadio/binaries/TASRT.pdf
Jeremy
KB8LFA
___
Elecraft mailing list
Post to:
13 matches
Mail list logo
