to execute the macros via a vb6 or better yet a
vb.net program. I tried to send a single character via a comm port but what
ever a keyboard sends I can not duplicate it via programing.
Any help would be appreciated.
Thanks,
Joe K2UF
Not sure if this the correct address for this question. I am trying to send
cammands to the P3 and K3 from a VB,NET program. I tried several different
attempts to send commands to the P3 and K3. I need the exact systax for the
code to send these commands. If this is not the correct place for
Wayne,
I am on the list for the KIO upgrade. Also I am on the list for an RSA for
repair on my K3. Will you hold my KIO upgrade kit until my K3 is in for
service.
Joe K2UF
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf
Joe K2UF
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ronnie Hull
Sent: Friday, April 22, 2022 7:14 AM
To: Jim Stockwell
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Elecraft Service
I’m in same boat Jim
In 1955 we were the cool guys with a slide rule in a leather case hanging
from your belt and india ink stains on your hands.
73 Joe K2UF
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne Burdick
Sent: Saturday, April
will synch the band with the K3. I am not sure if this has been working
like this right along and just did not notice.
Any ideas guys.
73 Joe K2UF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
Duct tape can not fix stupid, but it can muffle the sound. ;o)>
Merry Christmas to all,
73 Joe K2UF
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Wednesday, December 23, 2020 4:36 PM
To: elecr
I am trying to get FT8 running on my K3 using Rig blaster advantage.
Everything works except no transmit RF output.
Enable TX puts K3 into transmit but no RFoutput. Have tried adjusting RBA
xmit level and K3 mic output. No joy.
.Anyone able to share their PTT settings.
Thanks,
Joe K2UF
And $9.00 shipping + tax
73, joe K2UF
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of K9MA
Sent: Wednesday, December 2, 2020 3:57 PM
To: Harry Yingst; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Elecraft Kit Assembly
I use mine all the time for 4-40 nuts. It must be 50+ years old and it has
seen better days. Getting a little loose and fuzzy on the end. Tried
finding them on the internet machine. I have used small stiff tubing for
various size nuts but not the same thing.
Good luck,
73 Joe K2UF
Just added my name to the list. Hope I did not procrastinate to long.
Would like to upgrade my K3 as much as possible.
73,
Joe K2UF
--
This email has been checked for viruses by AVG.
https://www.avg.com
__
Elecraft mailing list
to
show one character and asked me to identify the character. I told him what
I had copied and he told me I had passed. I think he just wanted to see a
scared kid sweat a little more.
The good old days
73 Joe K2UF
--
This email has been checked for viruses by AVG.
https://www.avg.com
I have an unlimited supply here in upstate ny. I am not price gouging on
the fluid but the shipping and handling may be prohibitive. ;o}
Sorry could not help myself. Binary confinement is getting to me.
73 Joe K2UF
--
This email has been checked for viruses by AVG.
https://www.avg.com
. Saved a lot on shipping.
Good luck
73
Joe K2UF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
I remember working western Europe on six in the mid 50s. Using a homebrew
three element E.M.T. beam ( yes E.M.T. Could not afford aluminum!!) The
rcvr was an old BC radio with a six meter converter and a modified Globe
Scout transmitter (see my QRZ page.).
AHH the good old days.
73
Joe k2UF
My 2 cents. Thanks Baker group and Elecraft for number 329 CW
73 Joe K2UF
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of AB4IQ
Sent: Friday, July 06, 2018 8:49 PM
To: 'David Olean'; elecraft@mailman.qth.net
Subject: Re
I have been using my KPA500 for over 7 years using an Astron 35amp supply
on 115v . I use it mostly for chasing DX and contesting on CW. I regularly
push it up to 650 to 700 watts. No problems.
Good luck es 73
Joe K2UF
-Original Message-
From: elecraft-boun...@mailman.qth.net
I just put a mini DPDT switch on the base of my Bencher paddle. Now I can
switch between left/right hand keying easy peasy nice and easy.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill Johnson
Sent: Monday, March 19,
Is there a way to get the KPA500 on/off (P/ON0) commands to the KPA500 via
the P3 SVGA commands?
Thanks
Joe K2UF
---
This email has been checked for viruses by AVG.
http://www.avg.com
__
Elecraft mailing list
Home: http
As long as they don't think it's a good idea inside the DC beltway (UGHHH).
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Fred Jensen
Sent: Sunday, October 29, 2017 3:51 PM
To: elecraft@mailman.qth.net
Subject: Re:
to "turn
that noise off" ;o( ). You would think after 50 + years she would have
learned to love it.
73,
Joe K2UF
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ken G Kopp
Sent: Sunday, October 29, 2017 3:23 PM
To
STAND BACK!!! Here comes the e-flood.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne
Burdick
Sent: Thursday, April 20, 2017 12:51 PM
To: Elecraft Reflector
Cc: elecraft...@yahoogroups.com; elecr...@yahoogroups.com
Subject: [Elecraft]
Oh boy! You just broke the e_dam, now here comes the e_flood. ;o))
73 Joe K2UF
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Eric
Swartz - WA6HHQ, Elecraft
Sent: Friday, March 17, 2017 1:07 PM
To: elecraft@mailman.qth.net
Subject: Re
$50 or
$60. Worth a try.
Good luck
73 Joe K2UF
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill
Gaines
Sent: Monday, December 05, 2016 4:47 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Headset/Mic Suggestions
Since I seldom use SSB I
Using my K3/KPA500/KAT500/P3+SVGA with the TX sensor in line.
On the KPA500 the SWR reads 1.3 with one or two SWR led's lit also one or
two led's lit on the KAT500 but the SWR display on the P3 shows about 6.
Any ideas why this is happening?
Joe K2UF
This is the ultimate K-line shack. Windows will be an optional add on. I
would put one at the base of my tower but I think the 'boss' might require
that I live in it. ;o()
73 Joe K2UF
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John
Pitz
Is there a way to cable the K3/P3/KPA500 to send KPA500 macro commands via
the P3/SVGA macro utility.
73 Joe K2UF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
of
the K3 commands.
Any ideas/help
Joe K2UF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
Yup I see the dips here also from just a couple of s units to 4 or 5. No
pattern, like some one is tunning.
73 Joe K2UF
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Kenneth Moorman
Sent: Tuesday, February 16, 2016 2:20 PM
To: 'Mike Flowers
Peaks here in upstate NY at about 210 deg.
73 Joe K2UF
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike
Flowers
Sent: Tuesday, February 16, 2016 1:57 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] 10.118.288 dead carrier
Yep - I
and
that was before computer keying. My wife still thinks that was one of the
main reasons that triggered my plunge into senility.
Good luck es see you this weekend.
73 Joe K2UF
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dauer,
Edward
Sent
would
attach these leads ;o)
73 Joe K2UF
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Tony
Estep
Sent: Monday, March 16, 2015 8:53 PM
To: Elecraft
Subject: Re: [Elecraft] New Product to help many K3/KX3 users
On Mon, Mar 16, 2015 at 7:29 PM, Rick
.
Any ideas on what I broke.
Joe K2UF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
Thanks to all responders. I had wrong antenna selected with the RX-ANT
button. Old people should not mess around with complicated machinery.
73 Joe K2UF
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe
K2UF
Sent: Saturday, March 14, 2015 5
It is fascinating how seemingly benign reflector subjects can contain
unstable hidden fissionable material ;o)
73 Joe K2UF
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Phil
Hystad
Sent: Friday, December 12, 2014 3:43 PM
To: Phil Wheeler
Cc
I remember seeing that tool in magazine ads. I have a modified light weight
scissor jack to loosen tower sections. It loosens all three legs at the
same time. It works very well. If you don't find the rohn tool you might
consider the jack.
73 Joe K2UF
-Original Message-
From
Hi John,
Take your time, enjoy the building experience you will appreciate your
patience when you have your first QSO.
Maybe see you in the November CW sweepstakes.
Good luck
73 Joe K2UF
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
Nice going Sean. I remember my first QSO almost 60 years ago. About 6
miles from my QTH. Some DX!!!
You are now hooked. Might just as well sit back and enjoy.
Good Luck es 73 Joe K2UF
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
Will this radio be available for this years June VHF contest?
( I want to be the first one ask about the estimated shipping date for a new
Elecraft product. ;o) )
Joe K2UF
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf
I have had a similar thing happen to me also. I have been in a contest on a
run freq. and suddenly the KPA500/KAT500 will fault. This is on CW. If I
do a 'tune' the amp/tuner will retune and I can continue. Of course in the
few seconds it takes I will usually lose the freq.
73, Joe K2UF
off.
Any ideas?
Joe K2UF
With enough THRUST pig fly just fine.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Anyone know the ETA of the upgrade for SVGA decoding of RTTY?
73 Joe K2UF
With enough THRUST pig fly just fine.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
If you decide you don't want the hat and return it for a refund do you get
to keep the K3? What a deal!!
73 Joe K2UF
With enough THRUST pig fly just fine.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Chris
Got them on all bands 160 thru 10 CW. I'm happy. Another entity in the log
for my 5 band DXCC honor roll. Only about 320 to go. ;o)
73 Joe K2UF
With enough THRUST pig fly just fine.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
My KPA500 and P3 have worked TX5K on 8 CW slots and 1 RTTY slot. Setting
the SPAN to about 8 to 10 Khz makes the pileup holes easy to find (when they
are there). Yes they do fill up quite fast. Also DXA is a very interesting
novelty.
73 Joe K2UF
With enough THRUST pig fly just fine
Some may get two copies of this e-mail. Sent to both DXLAB and ELECRAFT.
I am trying to be able to turn the KPA500 on with a DXLAB Commander 'user
defined controls' control. Any one been able to do this or know how?
Thanks,
Joe K2UF
With enough THRUST pig fly just fine
I used my K3 at 1 watt this past spring and summer to work QRP DXCC. Also
worked a couple of Eurpean stations at .1 watt. Got a QRPp certificate for
that. Lots of fun but somewhat challenging.
73 Joe K2UF
With enough THRUST pig fly just fine.
-Original Message-
From: elecraft
several turns of solder. You might want to try the CW reflector for more
info.
Good luck
73 Joe K2UF
With enough THRUST pig fly just fine.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Stephen Roberts
Sent: Friday
Got a notice this evening that I will be receiving a package from Elecraft
Monday 12/4.
Joe K2UF
With enough THRUST pig fly just fine.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
Got my e-mail from Madelyn ( AKA Mrs. Claus ). KAT500 kit should be shipped
by early December.
Have to clear the work bench.
73 Joe K2UF
With enough THRUST pig fly just fine.
__
Elecraft mailing list
Home: http
Doing some station rebuild. Looking to get new ideas for coax patch cables
for interconnecting the K3 /P3 /KPA500 /(soon to be KAT500.
Using RG8 type/size cable makes connecting all the equipment difficult.
Any help/ suggestions?
Thanks Joe K2UF
I was told the same thing. Guess we will miss the CQWW CW.
Joe K2UF
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Rick Bates
Sent: Friday, November 02, 2012 8:52 PM
To: 'Phil Hystad'; 'elecraft@mailman.qth.net List
over the K3 manual and could not find any hints about problem
1. Problem 2 is a real puzzler.
Anyone have any ideas?
Thanks Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced
Just started playing with RTTY. How can I operate split using AFSK A mode?
Any help?
Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
__
Elecraft mailing list
Home
Just worked Demark for my 100th country using 1 watt from my K3. Now
Elecraft can send my new KAT500 anytime, I'm ready to be heard a little
earlier in the pileups. ;o)
With a little more respect for the QRPP folks
73 Joe K2UF
No trees were harmed in the sending of this e-mail
Scott,
Using the K3 Utility on your pc use the 'configuration' tab. Use 'edit
power on banner'.
Good luck
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message-
From: elecraft-boun...@mailman.qth.net
August 31st is our 49th wedding anniversary. Hope you can ship Joe's KAT500
on that date.
Signed. My wife
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message-
From: elecraft-boun...@mailman.qth.net
HEY !! I was going to say that. ;o}
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of stan levandowski
Sent
Erik,
You may want to save the bubble wrap. When you finish the KX3 wrap it in
the bubble wrap. It may not hurt as much when your wife beats you with it
;o)
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message
A status update would be nice.
Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John_N1JM
Sent: Monday, July 16
My J-38 also came from Chicago in 1954 (still have it!!). Allied radio. I
would order parts from them about 2 to 3 times a month. Usually less than
$5.00 per order. Paper boys did not make much back then.
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many
. They
send CW pretty good also. ;o)
Good luck es 73, Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ronald
several hours of course.
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Friday, June 22, 2012 9
Stan,
I can understand the keyer paddle plan, but why would you ever want to have
a mic. in your hand for eternity. ;o)
In the meantime enjoy your new toy.
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message
I can see where you could accidently touch the power button with your
knuckle as you pull the phones plug out of the jack. I seldom remove the
phone plug, but, just trying it several times I did turn the K3 off a couple
of times.
Good luck
73 Joe K2UF
No trees were harmed in the sending
Me to!
Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Phil LaMarche
Sent: Sunday, June 03, 2012 11:34 AM
for spikes. When ready to run I look for as wide a valley as I can
find ;o).
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net
The mid august shipping schedule will seem to make our summer last a
lo-o-o-o-ng time ;o) . Here in the north east that's a good thing.
(sorry guys, just sitting here with the radio, computer, antennae and N1MM
working and waiting for CQ WW to start.)
73 Joe k2UF
No trees were harmed
I would not enjoy staring at a white or yellow or brushed aluminum or any
other light colored radio for a full weekend contest or even a 4 hour
sprint. Now my ears hurt after a contest, I don't need my eyes to hurt
also. ;o)
73 Joe K2UF
No trees were harmed in the sending of this e-mail
the phone I called immediately. The
woman I talked to (did not get her name) said they had already received many
orders. I hope I can get in on the first batch. Would like to have it
operating before the fall contest season.
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however
I built a 1/10th scale model of a similar device in my basement woodshop.
It is very inefficient. I don't have the metal working skills to duplicate
it full size. Maybe I could sell it to a far east government as a satellite
delivery guidance system.
No trees were harmed in the sending of
I also enjoyed the daily 'Dilbertisms' even if they did sometimes hit close
to home. Had a few of them stuck to the walls of my cubicle back in the
day.
Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message-
From
a ball.
Good luck and congratulations. Welcome to our world.
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf
Eric,
You sure know how to squash a thread. Super pix.
Thanks for update.
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
that are left in the dark tangle them selves no matter how you try to keep
them neat.
Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
Hi Guy,
How about W2RUF and W2MTA from the NYS, 2RN and EAN days. They were my
operating time brackets. If I could not copy Bill comfortably I had not
been spending enough time on the nets. If I could copy Clara I had been on
to much.
73 Joe K2UF (ex K2TTG)
No trees were harmed
several hundred cycles ( or hertz) to move away from an existing QSO. Then
the Heathkit VFO became available WOW! Now I could answer a CQ right on his
frequency (of course that was after I upgraded from novice ;o] ).
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however
Thanks Wayne. Information is therapeutic. Helps to relieve anxiety. We are
a fragile lot.
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
with them. I have worn them through several
contest with glasses and they are the most comfortable I have used.
Good luck,
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message-
From: elecraft-boun...@mailman.qth.net
Any new info on the KAT500? $$numbers, pix etc.
Any info from the Orlando show?
I and my K-line are anxiously awaiting any info on my pending tuner.
Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced
When in 'data' mode if I try to split I get a 'SPL N/A' display. I do not
use the data modes very often. I did not see anything in the manual (
probably missed it). Any help?
Thanks
Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced
Thanks guys... another DUH moment. They seem to come more often these days.
Sometimes they merge into hours or even days. :o{
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message-
From: elecraft-boun
the Aptos crew gets the CW SSB feature working I will attempt an
SSB contest ;o)
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
__
Elecraft mailing list
Home: http
interest you WILL enjoy building and operating
your new radio.
Enjoy!!
73 Joe K2UF (K3#5057 + P3#1000 + KPA500#0576 + KAT500#(some day))
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message-
From: elecraft-boun
You probably have noticed, there are a lot of Elecraft missionaries lurking
in the weeds here.
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
First used in an email from KL7CC to Elecraft users. This has to be the
first use of the term because GOOGLE never heard of it ;o[
Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message-
From: elecraft-boun
pennies ;o}
Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
born
yet)can remove the dots or leave them.
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Richard Squire
Don,
I had the same problem, even after cataract surgery this week. I bought a
white marking pen at the local stationary/hobby store and put a 1/4 in. dot
in the middle of each button. Problem solved.
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
Has there been any update on the availability and cost for the redesigned
KAT500?
The Elecraft site still says fall 2011.
I have given up on February contest. Now hoping for CQ WPX CW in May.
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were
the
swt48?
Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Thanks to all who helped me with my first try at K3 macros. I looked thru
the k3 programmers ref. but could not see anything about the SBx command.
Is there another reference manual with more in depth info that I need?
Joe K2UF
No trees were harmed in the sending of this e-mail; however, many
Thanks Mike,
Part of my problem was I have an old copy of the pgmrs ref rev A. It only
has 11 pages. Just downloaded the latest rev. That should help.
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original Message
Got mine last January. It took me 2 football playoff games plus about 1
hour. Works great. I now have a P3 and KPA500. A lot less time for them.
Happy new year
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-Original
Maybe someone on one of these reflectors can help. I am trying to switch
the KPA500 between STBY and OPER via a Commander User defined control. I
tried '^OS1:' (without the quotes). Nothing. Any help out there?
Joe K2UF
No trees were harmed in the sending of this e-mail; however, many
Any update on the KAT500 availability?
Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
in) and the temp. would reach about
54/55C. Not sure if that is high low or normal.
First time I ever ran 'high' power from home in a contest. I'm sure I will
get trounced but had fun.
73, Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were
I have only had my K3 since January but no noise. I have mine set pretty
loose. I wonder if you could turn the pad over. If that stops the noise
maybe just replacing the pad would work.
Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced
Received KPA-500 # 0576 (kit) on Monday finished on Tuesday Worked Uganda
this afternoon after work.
I don't suppose that is not a misprint and you meant to say KAT500. Sure
would look nice sitting next to the K3/P3/KPA500. ;o)
73 Joe K2UF
No trees were harmed in the sending of this e
I would like to thank all the elves at Elecraft including Stephanie Susan
and Leony who packed all those parts including itty bitty screws nuts and
washers in those little yellow envelopes.
Thank you for KPA500 #0576.
Enjoy the holiday season
Joe K2UF
No trees were harmed in the sending
1 - 100 of 118 matches
Mail list logo
