! It
is interesting to note, that the knobs are quite improved in some 10 years
I own the K3 - the new knob turned to be reinforced with metal. Cool! Linas
LY2H
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
:)
73 Linas LY2H
<>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help s
I have both the FT- 817nd ( since ten years) and the KX-2 ( since about
two years).
The '817 used to be an unbeatable champion in the QRP rigs class for many
years due to its versatility, all-band (160m -70cm) all mode features. It
travelled with me all accross Europe and did a great job in
Touching is like you take the radio in to your hands, put it upside down on
the table, removing the back pannel, or just like pushing buttons on the
radio, or like taking a pen and slightly bumping on the chassis. I have
tried to turn the mic's gain down to 0, but it didn't help.
Linas LY2H
anybody has/had the same issue and know the solution?
Thanks , Linas LY2H
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Hello, HNY!
Loking for practical info on wiring-up of the KAT500 PA to the any
third-party, non Elecraft PA, incl Home- Made?Is the PTT cable necessary
from KAT 500 to the PA?
Fixing the FAULT alarm while it is on?
Qru direct on this emale or to the group.
73 Linas LY2H
Season's Greetings!
73 de Linas LY2H
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
John,
I am an owner of kx2 for a few years. I am amazed by the quality of the kx2
speaker. For such a tiny radio with so little space for a speaker , it is a
very well designed construction of the back cover of the radio and the
speaker itself!
73 de Linas LY2H
On Fri, Sep 8, 2017 at 4:43 AM
to compare the real-life
empyrical data of the other KX2 owners.
73! Linas LY2H
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Please check the D1/D2 chain, replace if necessary . I had the similar
problem, Elecraft support advised me to do this.
More info and the schematics on my Facebook page LY2H.
73 Linas LY2H
Forwarded message --
From: Nr4c <n...@widomaker.com>
To: IU6ASS <5battagl
it on the net. I use 8,8m + 8,8m of couterpoise on the
ground with my KX2 tuner for the outings and I have a 43m end fed wire for
a fixed 160-6 m operation at home with multiple quarter wave radials on
the roof.
73 Linas LY2H
<<
Cc:
Bcc:
Date: Sun, 7 May 2017 10:24:14 +0300
Subject: [El
, thanks for a quick reactions to the elecrafters community ideas!
Happy Easter everybody!
73 Linas LY2H
On 2017 bal. 15, št at 22:30 Wayne Burdick <n...@elecraft.com> wrote:
> KX2 beta firmware rev 2.75 has two new features: 4 programmable switch
> functions, and two full sets of ATU dat
=BKLIGHT, PF4=PS. Using the
radio car mobile a lot I already use the existing Pfn for the VOX in CW
mode, and the XIT is the second mostly needed. I will finaly decide on the
last two after some more time of variety usage.
73 Linas LY2H
On 2017 bal. 9, sk at 21:20 Chuck Guenther <charles9...@att.
, this did not damage the tuner. But just to
be safe, we’re sticking with our 20 W rating."
73 Linas LY2H
On <<<2017 bal. 6, kt at 19:34 Mike Morrow <k...@earthlink.net> wrote:
>
>
>
> A subsequent post about using a T1 ATU on the output of a 40 watt external
>
It would be a good idea if the KX2 could be modified in order to get the
Band Data signal from the ACC socket, for as it is now it only provides
with the Key Out signal. I don't know though how the Band info is
arranged in the Kx2/KXPA100 combo, may be some RF sensor?
73 Linas LY2H
On 2017
though. ( For the ATU I use the famous Elecrat T-1,
yes, it can stand up to 40 W , just do not tune at this power level, :)) At
the price of approx 150 USD it is very good value for money, I think.
73 de Linas LY2H
On 2017 bal. 6, kt at 16:34 Bert Garcia N8NN <n...@earthlink.net> wrote:
George,
100% supportt! I've been thinking even to swap the KX2 knob with the
lovely-rubber-coated knob of the FT-817ND! Not sure yet if it is possible
at all, :). Surely, anything original from Elecraft would be of no
hesitations!
Linas LY2H
On 2017 kov. 30, kt at 17:47 George Sereikas <
it for- the VOX on/off or the Xit
on/off for example. While on road and driving it is tiresome and dangerous
to mingle with the menu settings. Actually the VOX setting should stay
always on if you switch it on. at the moment you have to switch it on on
every power-up.
73! Linas LY2H
On 2017 kov. 30
lenght) made of a junk-box loading coil and the whip stolen from the VHF
5/8 antenna. During every 20min trip to work and back I make 1-3 QSO's
incl even some stns from USA, Canada, Asian Russia and EU islands like
Crete. I am very much content with this in-built tuner!
73! Linas LY2H
On 2017
change- the
ESC button doesn't work any more for stopping the TX but the F11 takes the
job over!
I recommend this method to all KX2 owners, thanks to this very
knowledgable Elecrafters community!
73 de Linas LY2H
On 2017 kov. 23, kt at 03:01 Chris Tate - N6WM <ct...@ewnetinc.com> wrote:
>
/RTS
configuration is doing it all perfectly under the same logger
configuration.
Is there any other way to get CW/PTT control on KX2 from the N1MM+ logger?
Thanks for the inputs!
73 Linas LY2H
__
Elecraft mailing list
Home: http
As it reads in the manual these pins are reserved for the factory needs, :)
I wouldn't sugest connecting anything to it.
73 Linas LY2H
On 2017 kov. 19, sk at 12:32 kevino z <z_kev...@hotmail.com> wrote:
> I'm assuming some sort of test port. Not really evident. If someone knows
>
Thanks everybody for a usefull info!
The US powerr plug seems working no problems with a normal travel adaptor
on my KX2 battery charger.
Shouldn't be a problem on this PS too.
73 de Linas ( LY2H)
On 2017 kov. 16, kt at 02:32 Bill Frantz <fra...@pwpconsult.com> wrote:
> My Pro Audio En
Is this fine device available from European dealers, anybody knows?
I run at the moment a ps from MFJ specifically designed for the FT817, it's
fine and no noise but it is quite bulky.
Linas LY2H
On 2017 kov. 14, an at 03:43 kevino z <z_kev...@hotmail.com> wrote:
> Yeah, Pro En
Thanks Wayne!
Calibration helped. Problem solved!
Greate rig!
73 de Linas LY2H
On 2017 kov. 13, pr at 18:30 Wayne Burdick <n...@elecraft.com> wrote:
> Hi Linas,
>
> I can't duplicate this problem on my KX2. I would suggest re-doing the
> transmit gain calibration on 80 meters
k it could be the firmware problem.
Would be interesting to know if anybody else experiencing the same strange
effect?
72! de Linas LY2H
KX2 #1488
K3 #1568 S-upgraded
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
by the
way, the " normal" one) and bingo! The problems gone , T-1 runs smoothly
and quickly .
Hope this info is usefull for the T-1 owners and you do have the schematic
diagram of the unit in order to better understand the whole thing.
73 de Linas LY2H
<<>>
-
&l
mast with
18m vertical and with 16 radials of 25m long. I will try this this coming
spring, weather permitting.
Wish you good luck and lots of fun with practical experimentation in the
field!
73! Linas LY2H
On 2017 vas. 28, an at 01:45 Don Wilhelm <donw...@embarqmail.com> wrote:
to the Electaft tech support, they are quick and
friendly, once have helped me a lot by guiding through the fix of the K3
I/O
board.
Linas Ly2H
On 2017 vas. 26, sk at 21:40 Jim Miller <jtmille...@gmail.com> wrote:
> Are you sure the push button switches are working?
>
> Jim ab3c
suspicious and
resoldering the BNC contacts hasn't made any difference.
Any wise advise is welcome ! ( Except the " send it back to Elecraft" type,
:). It would be cheaper just to order the new one, :)
73 de Linas LY2H
__
Elecraft ma
is not!
I recommend everybody to try out this and experiment with the AGC settings
on your K3 radios!
73 de Linas LY2H
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
table work but then you
need a kind of ground whatever you can get at hand. Have tried it for many
years with the Elecraft T-1 tuner with great success working 5 W from the
hotels accross Europe tuning anything I could- window frames, rain water
pipes, random pieces of wire, :)...
73 de Linas LY2H, ex ON4BH
.
73 de Linas ON4BHP, K3 #1568
- Original Message -
From: dbellw...@aol.com
To: elecraft@mailman.qth.net
Sent: Thursday, February 05, 2009 1:16 PM
Subject: [Elecraft] DXpedition computer for K3
Does anyone use an ACER Netbook Aspire One with a K3? I need
! de Linas ON4BHP
K3 #1568 ___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
34 matches
Mail list logo