What voltage does the K3S display while transmitting SSB?
Sent from my iPhone
...nr4c. bill
> On Mar 26, 2017, at 12:31 PM, Jim Kutsch <jim.kut...@ky2d.com> wrote:
>
> I am a new K3S owner and very pleased. However, on SSB, I am getting reports
> that my audio is distorte
Great idea. Print the manual on the radio case. Like it. You'll always have it
handy.
Sent from my iPhone
...nr4c. bill
> On Mar 23, 2017, at 9:23 PM, kevino z <z_kev...@hotmail.com> wrote:
>
> found it - had to tap the 1 on the numeric key when the CW WGHT menu is up.
>
Turn on the display of Temperature. Watch it while transmitting.
Sent from my iPhone
...nr4c. bill
> On Mar 21, 2017, at 3:45 PM, rich hurd WC3T <r...@wc3t.us> wrote:
>
> But only on JT modes? And this is a 7XXX serial number KX3.
>
> I do not think th
Reduce the computer sound level to about 30% and you will gain finer adjustment
with K3S Lin In.
Sent from my iPhone
...nr4c. bill
> On Mar 20, 2017, at 10:57 AM, Terry Schieler <w...@swbell.net> wrote:
>
> Don wrote,
>
> <"3) Audio levels - ignore the intern
That is the serial port.
Sent from my iPhone
...nr4c. bill
> On Mar 19, 2017, at 9:12 PM, <j...@kk9a.com> <j...@kk9a.com> wrote:
>
> The KAT500 has no serial port, just a 3.5mm round jack.
>
> John KK9A
>
> From: tomb18@ videotron.ca
> Sun Mar 19 1
Did you set RS-232 to USB and not 38400?
Sent from my iPhone
...nr4c. bill
> On Mar 18, 2017, at 4:29 PM, Alan. G4GNX <g4...@theatreorgans.co.uk> wrote:
>
> Have you tried accessing the Device Manager via Control Panel to check
> whether a port is being assigned
Go slow and carefully.
Sent from my iPhone
...nr4c. bill
> On Mar 16, 2017, at 10:01 AM, Chuck Chandler <chandler...@gmail.com> wrote:
>
> I will be putting my K3S on the bench this weekend to try to trace an
> intermittent bug. Elecraft support has suggested removi
You should notify Elecraft. It isn't supposed to work like this I don't
believe.
Sent from my iPhone
...nr4c. bill
> On Mar 15, 2017, at 2:35 PM, Alan. G4GNX <g4...@theatreorgans.co.uk> wrote:
>
> Absolutely sure, Bill.
>
> This happened once before with our club's K3
Are you sure the other signal is from rear mic and not some other source?
Try turning TX monitor to zero and see what happens. You may be picking sound
from speakers and not the rear mic.
I've had K3 and K3S and have never had both mics "live" at same time.
Sent from my iPhone
...
Can't speak for right/left but yes to the one with the handle.
Sent from my iPhone
...nr4c. bill
> On Mar 13, 2017, at 5:11 PM, Dauer, Edward <eda...@law.du.edu> wrote:
>
> I just ordered the KIO3B and a KBPF3 mod kit for the K3. The process of
> installing the KBPF3 m
You do have the passing under the span wide brace, don't you? And not clamped
to it by the top cover.
Sent from my iPhone
...nr4c. bill
> On Mar 11, 2017, at 9:35 AM, Chuck Chandler <chandler...@gmail.com> wrote:
>
> Well, this morning I got a chance to put the K3S on the
Carter.
The Heil should directly plug into the Phones and Mic jacks on the rear of the
K3.
Sent from my iPhone
...nr4c. bill
> On Mar 11, 2017, at 7:46 AM, Carter Craigie <carter...@verizon.net> wrote:
>
> Hello fellow Elecrafters,
> I am fortunate to have a nice f
#10 wire for my K3 cables.
Use PowerGate to charge battery and run accessories. Run radio from separate
cable to PS.
When power goes out reconnect radio to battery.
Sent from my iPhone
...nr4c. bill
> On Mar 10, 2017, at 12:00 AM, James Bennett <w6...@me.com> wrote:
>
> I p
the left speaker. BTW: SPKR set to 2.
It seems like bleed-through maybe.
Note that my old K3 doesn't do this. Only my K3S.
Sent from my iPhone
...nr4c. bill
> On Mar 6, 2017, at 9:23 AM, Don Wilhelm <donw...@embarqmail.com> wrote:
>
> Max,
>
> Is it not easy to adjust the
This has only been a problem with my K3S, my K3 doesn't exhibit this anomaly.
I frequently operate after wife goes to bed and I want the speakers OFF. but
the left one never really is OFF. Only much reduced output.
Sent from my iPhone
...nr4c. bill
> On Mar 6, 2017, at 9:11 AM, M. Geo
I commented on this over a year ago and was tole that it was not possible. BUT
IT STILL DOES IT!
Thanks for your input.
Sent from my iPhone
...nr4c. bill
> On Mar 5, 2017, at 8:43 PM, M. George <m.matthew.geo...@gmail.com> wrote:
>
> I just noticed that I have low audio o
Thanks for letting us know you are up again. And, thanks for the solution.
Chances are someone else will learn from your experience.
Enjoy.
Sent from my iPhone
...nr4c. bill
> On Mar 4, 2017, at 2:54 PM, Irma Linas <irmalina...@gmail.com> wrote:
>
> Hello group,
>
>
Check BNC cable from P3 to K3. Be sure it's properly seated.
Sent from my iPhone
...nr4c. bill
> On Mar 4, 2017, at 1:22 PM, Marvin Wheeler <marvwhee...@nwlink.com> wrote:
>
> Hello:
>
>
>
> Using a K3S with P3 and have lost the cursors. I was operating and t
The KX3 never accepted paddles input to send RTTY using DATA sub-mode AFSK A.
You must select sub-mode FSK D to use this feature. Read the manual on Data
modes.
Sent from my iPhone
...nr4c. bill
> On Mar 1, 2017, at 1:33 PM, "mar...@the-wallers.net" <mar...@the-walle
The warnings are for connecting SPEAKERS to the Rear Speaker jack. You SHOULD
use a TRS plug to lessen the opportunity of the smoke escaping from the speaker
stereo amplifier.
There is no such threat to the Phones jack(s).
Sent from my iPhone
...nr4c. bill
> On Feb 27, 2017, at 3:27
The 409 is zero.
Are the passband centered on display?
Sent from my iPhone
...nr4c. bill
> On Feb 18, 2017, at 3:30 AM, Dave AD6A <d...@ad6a.com> wrote:
>
> Hi Folks,
>
>
>
> I'm having a go at my first CW contest for many years (and boy, am I
> rusty!!)
WIN10 should have the driver. I've used 3 different Ein10 installs and never
needed to find a driver.
Sent from my iPhone
...nr4c. bill
> On Feb 14, 2017, at 8:43 PM, DALE LONG <dale.l...@prodigy.net> wrote:
>
> The Elecraft website forwards us to www.ftdichip.com
>
>
Not again?
Sent from my iPhone
...nr4c. bill
> On Feb 14, 2017, at 11:48 AM, Guy Olinger K2AV <k2av@gmail.com> wrote:
>
> In spite of ON4UN's 4.3, I stand by my prior statements concerning the
> excellence of end-fed half wave antennas (EFHW), and their non-existent
>
Ant 2??
Sent from my iPhone
...nr4c. bill
> On Feb 13, 2017, at 1:42 PM, todd ruby <t...@ruby-wine.com> wrote:
>
> Hi,
> I was just operating on 15 cw working west Africa no problem, changed bands
> and all of a sudden no audio and no power out! RX ant is not engaged. Do
Get the manuals for the amp ant ATU.
Sent from my iPhone
...nr4c. bill
> On Feb 13, 2017, at 10:48 AM, Mike Crownover <a...@gvtc.com> wrote:
>
> I can't seem to find a hook up diagram for the entire K Line. I know I've
> seen it somewhere but can't find it. Can someone dire
Has there been a day this year that this topic wasn't discussed?
Someone please bury this dead horse.
Or start a new reflector on EFHW antennas. PLEASE!
Sent from my iPhone
...nr4c. bill
> On Feb 12, 2017, at 11:55 PM, Ron D'Eau Claire <r...@cobi.biz> wrote:
>
> That's corre
Frequency where reactance equals zero.
Sent from my iPhone
...nr4c. bill
> On Feb 11, 2017, at 3:29 PM, Charlie T, K3ICH <pin...@erols.com> wrote:
>
> Define "resonance".
>
> Chas
>
> -Original Message-
> From: Elecraft [mailto:elecraft-bo
I think the ATU needs 3 W to work reliably.
Sent from my iPhone
...nr4c. bill
> On Feb 9, 2017, at 12:40 PM, Nicklas Johnson <n...@n6ol.us> wrote:
>
> Just noticed that using the internal tuner, the TUN PWR option on the KX3
> seems to be ignored, at least for any
iPhone
...nr4c. bill
> On Feb 9, 2017, at 8:55 AM, John Lemay <j...@carltonhouse.eclipse.co.uk>
> wrote:
>
> Hello all
>
> I hope this is not a dumb question .. I have a K3 (not S) which has
> the sub receiver and has been updated with the KIO3B.
>
&g
Adjust the sidetone to find exact frequency. It's very sharp and might only
work if freq is exact.
Sent from my iPhone
...nr4c. bill
> On Feb 6, 2017, at 9:08 PM, stan levandowski <sjl...@optonline.net> wrote:
>
> Nice speaker but unfortunately won't help me out here. Â I n
I think that speaker is very sharp so the frequency of the audio sidetone must
be very exact.
Sent from my iPhone
...nr4c. bill
> On Feb 6, 2017, at 9:05 PM, stan levandowski <sjl...@optonline.net> wrote:
>
> No,Peter, it "acts" like a filter to focus on CW frequenc
Google something like "K3 n1mm function keys K3DVR", I found a .mc file that
works well.
Sent from my iPhone
...nr4c. bill
> On Feb 6, 2017, at 5:49 PM, Fred Jensen <k6...@foothill.net> wrote:
>
> Yes. You use the F-key definitions to simulate a tap or hold of M1
I suspect they need to be switched into the circuit, done with the logic when
the amp is turned Off.
Sent from my iPhone
...nr4c. bill
> On Feb 1, 2017, at 8:55 PM, <j...@kk9a.com> <j...@kk9a.com> wrote:
>
> If the fans are running on the capacitor charge when
Mine has been OFF for a one week vacation once in three or four years since I
built it. I have a nite light that consumes more power.
Sent from my iPhone
...nr4c. bill
> On Jan 31, 2017, at 10:45 PM, Dave AD6A <d...@ad6a.com> wrote:
>
> I recently added a KPA500 kit for
Just turn the DSP Filter knob to whatever width you like.
Sent from my iPhone
...nr4c. bill
> On Jan 31, 2017, at 9:07 PM, <abulling...@comcast.net>
> <abulling...@comcast.net> wrote:
>
> I just got my new (used) K3/10 in the mail yesterday and have been having a
I use an "L" match to tame mine. Touch up with KAT500. The KAT3 has similar
capability.
Sent from my iPhone
...nr4c. bill
> On Jan 30, 2017, at 11:34 PM, Marvin Wheeler <marvwhee...@nwlink.com> wrote:
>
> Will the KAT 3 tune an end fed wire of about 180 ft on 160
This changed a while ago Link is now a menu item.
You don't have to LINK to use Diversity.
Sent from my iPhone
...nr4c. bill
> On Jan 30, 2017, at 6:09 PM, Stan AE7UT <ae7...@gmail.com> wrote:
>
> I have a K3 with dual receivers. I used to just push the sub butto
Power supply voltage AT RADIO!!!
Sent from my iPhone
...nr4c. bill
> On Jan 30, 2017, at 11:14 AM, Jim Rhodes <jimk...@gmail.com> wrote:
>
> Yes I had done that already. Am wondering if there might be a problem on
> the other end of the wire. But it does sense the voltag
Is this an Amateur frequency or a state/federal emergency net frequency for
emergencies? If the radio thinks it's out-of-band it probably is. I don't have
my 60meter freq chart handy and if this is one of our frequencies disregard
all comments above.
Sent from my iPhone
...nr4c. bill
Since when is an EFHW a Random wire? It's not random, it's a half wavelength
on a given frequency.
A Random wire is a wire of any length not resonant on the frequency desired.
But it's a Half Wave on SOME frequency!
Sent from my iPhone
...nr4c. bill
> On Jan 29, 2017, at 12:53 PM, Char
Hate to bring this up, but. Check the Power Pole connectors on K3 power
cable. They should be pushed in tightly so that the contact lip curls over the
spring.
Sent from my iPhone
...nr4c. bill
> On Jan 29, 2017, at 9:57 AM, James Walker <jimmy.wal...@outlook.com> wrote:
>
ew feature without being so inundated with all at once.
Sent from my iPhone
...nr4c. bill
> On Jan 28, 2017, at 8:20 PM, <abulling...@comcast.net>
> <abulling...@comcast.net> wrote:
>
> Years ago I built a nice K2/100 which I still have and love but I saw a K3/
Unplug the radio from power. Unplug the USB cable
Re-boot computer plug in USB and then power up the radio. It should start the
FW load.
Sent from my iPhone
...nr4c. bill
> On Jan 28, 2017, at 12:27 PM, N2TK, Tony <tony@verizon.net> wrote:
>
> I believe this was address
Is this with antenna or dummy load?
Sent from my iPhone
...nr4c. bill
> On Jan 26, 2017, at 12:01 PM, Bill Leonard N0CU <billincol...@gmail.com>
> wrote:
>
> I am having a strange problem with my K3s/10: the max output power on 20M
> drops from 11.5W to 7.5W as the freq i
Get the "S". And a late one will be expensive so get it from big "E" and enjoy
the warrantee and service. You'll be glad you did.
Sent from my iPhone
...nr4c. bill
> On Jan 25, 2017, at 10:42 PM, John_N1JM <johnn...@gmail.com> wrote:
>
> I'm about rea
, then start here and find out why. Once this checks, move dummy load
to KAT500 output. Should also be 1:1 or nearly so.
Sent from my iPhone
...nr4c. bill
> On Jan 25, 2017, at 6:31 PM, Kenneth Christiansen <w...@i29.net> wrote:
>
> Thank you to the three people that responded to this
On this subject. I did notice a "chirping" signal during the NAQP last Sat. No
idea of call, should have made a note I guess. Second time in a week I heard
this on the air.
Sent from my iPhone
...nr4c. bill
> On Jan 19, 2017, at 2:09 PM, Doug Smith <d...@w7kf.com&
If like the KX3 it works from zero down to -30 or lower. Zero is MAX RF.
Sent from my iPhone
...nr4c. bill
> On Jan 19, 2017, at 1:06 AM, David Gilbert <xda...@cis-broadband.com> wrote:
>
>
>
> What are you doing with your RF gain set to zero??
>
> Dave AB7E
Yes. Read the manual on setting levels for digital modes in the manual. Forget
anything you knew before.
Sent from my iPhone
...nr4c. bill
> On Jan 17, 2017, at 7:56 PM, Jerry <w...@jetbroadband.com> wrote:
>
> Hello,
>
>
>
> I am using my K3, KAT500 and KP
Mine only transmits for around 42 seconds. So should not impact the rec on
next minute.
Sent from my iPhone
...nr4c. bill
> On Jan 17, 2017, at 11:48 AM, John Stengrevics <jstengrev...@comcast.net>
> wrote:
>
> Many thanks to all who provided their suggestions.
>
>
Check manual, assembly/parts list.
Sent from my iPhone
...nr4c. bill
> On Jan 17, 2017, at 7:01 AM, GW4DVB <br...@g4dvb.co.uk> wrote:
>
> Does anyone know the thread size of the earthing post on the KAT500 ATU
>
> In a re-org of the shack I've lost the
Go to control panel and use Date/Time app to synchronize the time. You can have
everything set perfect but if the clock is off, it will just stare at you.
Sent from my iPhone
...nr4c. bill
> On Jan 15, 2017, at 6:14 AM, PAUL GM0BKC <gm0...@gmail.com> wrote:
>
> Hi all
> I'
Why do you need two sensors?
Sent from my iPhone
...nr4c. bill
> On Jan 12, 2017, at 8:54 PM, Harry Yingst via Elecraft
> <elecraft@mailman.qth.net> wrote:
>
> I'm thinking an electrical switch (relay, Quad bilateral switch etc)
> Then using DIGOUT1 to to toggle the switc
I have decent results with WIN10 audio out set very low level. This allows Lin
In to be set to around 10 and gives reasonable resolution.
Sent from my iPhone
...nr4c. bill
> On Jan 12, 2017, at 8:39 PM, Jim Miller <j...@jtmiller.com> wrote:
>
> I'm seeing some problems ge
The USB port on K3S also has the DTR and RTS information available.
Sent from my iPhone
...nr4c. bill
> On Jan 12, 2017, at 1:15 PM, Nicklas Johnson <n...@n6ol.us> wrote:
>
> Unless I'm mistaken, doesn't the K3S connect directly via USB though? If
> the problem is happening
Could you have multiple PTTs active. Like PTT and VOX, or two PTTs refed in
software?
Sent from my iPhone
...nr4c. bill
> On Jan 12, 2017, at 10:03 AM, stengrevics <jstengrev...@comcast.net> wrote:
>
> When I transmit (using MSK144), the transmit stays on after the transmissio
Guys, it's time to reset your LoTW Location in your logging program. I and
others are getting NPOTA credits for parks during the ARRL RTTY RU contest last
weekend. They don't count, but your location info may be wrong when uploaded to
LoTW.
Sent from my iPhone
...nr4c. bill
Me thinks you have the wrong label on the radio. The one on FW should be the
correct one. UNCHANGEABLE.
Sent from my iPhone
...nr4c. bill
> On Jan 9, 2017, at 1:20 PM, Wayne Moore K7EX <k...@frontier.com> wrote:
>
> Hi all,
>
> New KX3 owner here. I have noticed that th
Things are tough.
And I want a Macro to turn the radio ON!
Sent from my iPhone
...nr4c. bill
> On Jan 7, 2017, at 7:47 PM, George Kidder <gkid...@ilstu.edu> wrote:
>
> Hi all,
>
> I initially started using data modes by the "set the power to maximum &q
You get COMP/ALC or SWR/RF POWER.
Sent from my iPhone
...nr4c. bill
> On Jan 7, 2017, at 10:52 AM, RichardG3ZIY <richardg3...@gmail.com> wrote:
>
> It occurred to me that on transmit the S meter is somewhat redundant. A
> suggestion for the next firmware update is that
I'm no expert but the reader is probably reading exactly what you send. I will
frequently see my K3S read "NR4TR". It's all in the spacing and we know what we
mean to send but the reader has no idea until it hears it. And, it has no
"context" to assist it.
Sent from my
You may just need more volts at the amp. For full power from KXP100 you'll need
at least 14 to 14.5 volts at the amp end of the cable. From battery power, use
two short cables of at least AWG 12 or 14 wire.
Sent from my iPhone
...nr4c. bill
> On Jan 2, 2017, at 12:32 PM, Don Wilhelm &l
Or just spend the ~$70 and buy an MH2. It's already wired ready to go.
Sent from my iPhone
...nr4c. bill
> On Jan 1, 2017, at 6:49 PM, Don Wilhelm <donw...@embarqmail.com> wrote:
>
> Ron,
>
> I am not going to give you a step by step set of instructions, but the K3 (no
load on unused
antenna and you are set. I'm not sure of the model number but it's in their
catalog.
Sent from my iPhone
...nr4c. bill
> On Dec 30, 2016, at 5:49 PM, stan levandowski <sjl...@optonline.net> wrote:
>
> I would like to use a coaxial switch for an unintended use a
Since the radio is not really that modular I'd not hold my breath. The K3 had
several boards that made up the KIO3 module.
Sent from my iPhone
...nr4c. bill
> On Dec 30, 2016, at 3:54 PM, Dave Hartzell <hartz...@gmail.com> wrote:
>
> I'm not sure what the upgrade an
How?
Sent from my iPhone
...nr4c. bill
> On Dec 29, 2016, at 6:06 PM, Richard Fjeld <rpfj...@outlook.com> wrote:
>
> I once had a key that was prone to cause chirp.
>
> Dick, n0ce
>
>
>>> On 12/29/2016 3:27 PM, Doug Smith wrote:
>>> I was i
You pressed and held the Menu button to display F-Key labels and you have not
created any.
Sent from my iPhone
...nr4c. bill
> On Dec 27, 2016, at 5:43 PM, James Bennett <w6...@me.com> wrote:
>
> Once again, the brain has abandoned me. On my PX3, the white outlined box
>
Carefull. Are they wire-wound power resisters cased in ceramic. If so they are
likely inductive and of marginal use as withvRF they will not be just resistive
but somewhat inductive and this will skew your results.
Sent from my iPhone
...nr4c. bill
> On Dec 27, 2016, at 9:43 AM, Paul C &l
from my iPhone
...nr4c. bill
> On Dec 27, 2016, at 9:37 AM, Paul C <paul...@sbcglobal.net> wrote:
>
> I was wondering if Elecraft has a real tech support phone number or official
> support email address aside from this user forum. I ask because I am a
> novice to this r
I think you should contact customer support at Elecraft. I believe there was an
issue with early radios not being epoxied to the pcb.
Sent from my iPhone
...nr4c. bill
> On Dec 26, 2016, at 7:45 PM, Mark Hogan <ml.ho...@gmail.com> wrote:
>
> I have SN 31, I recently fin
AGC just flashing? Do you mean ALC?
Look at voltage while transmitting.
Sent from my iPhone
...nr4c. bill
> On Dec 23, 2016, at 5:02 PM, Dave Cole <d...@nk7z.net> wrote:
>
> Hi,
> I am sure I saw a few things a while ago on the K3 power hunting when running
> JT65
Not sure what you call a "sound board" but if you mean the USB audio and serial
interface mod (KIO3a) it's been available for some time.
Sent from my iPhone
...nr4c. bill
> On Dec 22, 2016, at 10:19 PM, Guy Olinger K2AV <k2av@gmail.com> wrote:
>
> Whatever
Ok. KIO3B.
Sent from my iPhone
...nr4c. bill
> On Dec 22, 2016, at 10:30 PM, Gary Hembree <n...@cox.net> wrote:
>
> Try this:
> http://www.elecraft.com/elecraft_prod_list.htm#kio3bupkt
>
> 73
> Gary, N7IR
> ___
Check with Jim Brown K9YC.
Sent from my iPhone
...nr4c. bill
> On Dec 22, 2016, at 4:10 PM, K9MA <k...@sdellington.us> wrote:
>
>> On 12/22/2016 11:40, Jim Brown wrote:
>> IMD also affects CW. What we call CW is not "continuous wave," it is a
>>
Don't forget to multiply by two, current makes the round trip.
Sent from my iPhone
...nr4c. bill
> On Dec 21, 2016, at 9:19 PM, John Kaufmann <john.kaufm...@verizon.net> wrote:
>
> I use a 6-foot run of 10 gauge cable between my power supply (the Astron
> RS-35M) and my K
PPs solder real well. Just keep the solder off the outer portion of the round
part where the wire fits.
Sent from my iPhone
...nr4c. bill
> On Dec 20, 2016, at 5:34 PM, Gary Smith <g...@ka1j.com> wrote:
>
> Hi Jim & the others who replied,
>
> This i
So lock the VFO.
Sent from my iPhone
...nr4c. bill
> On Dec 19, 2016, at 2:24 PM, rfphelps <rfphe...@snet.net> wrote:
>
> I've had 16 years of Elecraft experience with the K2 and a bit less with the
> K1 and KX1 - then I added a KX2 last September! Operating it has b
Which KUSB? The older Prolific or the more recent FTDI? Different drivers.
Sent from my iPhone
...nr4c. bill
> On Dec 18, 2016, at 6:43 PM, Rick Braun <rhbr...@msn.com> wrote:
>
> I downloaded the latest K3 utility onto my Surface Pro 4 with Windows 10. My
> K3 is seria
???
Sent from my iPhone
...nr4c. bill
> On Dec 18, 2016, at 12:35 PM, ab2tc <ab...@arrl.net> wrote:
>
> Hi all,
>
> Does anybody know what's up with marc.info? There have been no posts in
> three days.
>
> AB2TC - Knut
>
>
>
> --
> Vie
Chirps? Mine is more like a slow "whump whump whump", not a chirp.
Sent from my iPhone
...nr4c. bill
> On Dec 18, 2016, at 7:40 AM, K9ZTV <k9...@socket.net> wrote:
>
> The R.L. Drake Company referred to the zeroing or beating indicators as
> "canary
What is your antenna like on 20 meters? Sounds more like antenna than amp.
Sent from my iPhone
...nr4c. bill
> On Dec 18, 2016, at 6:08 AM, Joe Hutchens AJ8MH-Radio
> <aj8mh-ra...@charter.net> wrote:
>
> This is a question I've been wanting to ask...
>
> I've
You should be using DATA A mode for wsjt.
Look in the manual for data modes. It works.
Sent from my iPhone
...nr4c. bill
> On Dec 17, 2016, at 5:49 PM, John Klewer <n6axj...@gmail.com> wrote:
>
> OKI have read several archived email threads regarding this issue so
Reduce computer sound output and get finer control with K3 Lin IN control knob.
Sent from my iPhone
...nr4c. bill
> On Dec 17, 2016, at 3:07 PM, Don Putnick <donnie...@gmail.com> wrote:
>
> I'm having a heck of a time fine tuning my output for digital modes. I have
> my so
I too would use a TRS plug for this. But note that most digital software only
looks at the tip of the plug.
Sent from my iPhone
...nr4c. bill
> On Dec 17, 2016, at 8:26 AM, Ed G <ed.n...@gmail.com> wrote:
>
>
> Hello,
> Just checking on this...I am using an
Ok. I missed the big NOT.
Sent from my iPhone
...nr4c. bill
> On Dec 16, 2016, at 5:41 PM, Fred Jensen <k6...@foothill.net> wrote:
>
> Precisely. Open source software has its place in situations where the
> participants are technically qualified. However, I can't imagin
Right. Duh!!!
Sent from my iPhone
...nr4c. bill
> On Dec 16, 2016, at 5:00 PM, Don Wilhelm <donw...@embarqmail.com> wrote:
>
> Bill,
>
> I think there is a big "NOT" missing from your post.
> How could Elecraft control and provide support for code of each
Think Wireless not Bluetooth. Different. The wireless transceiver will plug
into the P3. Some work, some don't.
Sent from my iPhone
...nr4c. bill
> On Dec 16, 2016, at 2:15 PM, Irwin Darack <idar...@gmail.com> wrote:
>
> Do not want wireless. I will be plugging the Keyboa
If it were "open source" Elecraft could control what you did to your radio.
Sent from my iPhone
...nr4c. bill
> On Dec 16, 2016, at 1:07 PM, Doug Person <d...@k0dxv.com> wrote:
>
> I'm a big Pi fan myself. So if adding my voice provides any additional
> influ
Utility.
Sent from my iPhone
...nr4c. bill
> On Dec 16, 2016, at 12:50 PM, John Altman <wa4...@gmail.com> wrote:
>
> I just acquired a used KPA500 that has the prior owners call sign embedded
> in the start up firmware.
>
> How do I remove this call sign and repla
PWR ON is on the Acc2 port. Needs someway to ground the pin to turn ON the K3.
Internet to relay, telephone to relay.
Sent from my iPhone
...nr4c. bill
> On Dec 15, 2016, at 12:38 PM, Gary Smith <g...@ka1j.com> wrote:
>
> On one of the lists I'm on, one of the
> guys a
Google it for your laptop. It's a easy fix for most.
Sent from my iPhone
...nr4c. bill
> On Dec 7, 2016, at 9:44 PM, Ed Gilliland <w5tm...@gmail.com> wrote:
>
> Just received a new HP ProBook 455 G3 with Windows 10 Professional. I've
> been able to successfully install N1
So set a PF Key to toggle modes. How hard is it to tap a button? How you
gonna execute the Macro anyway?
Sent from my iPhone
...nr4c. bill
> On Dec 7, 2016, at 8:57 PM, Alan Bloom <n...@sonic.net> wrote:
>
>> On 12/07/2016 05:11 PM, Alan Bloom wrote:
>> I think a
So simple.
Sent from my iPhone
...nr4c. bill
> On Dec 7, 2016, at 8:11 PM, Alan Bloom <n...@sonic.net> wrote:
>
> I think all you have to do is QSY, switch to tracking mode to center the
> display and then switch back to fixed mode.
>
> Alan N1AL
>
>
>>
It seems you turned text decode to TX only. This will decode what you send with
paddles (not hand key) but will not decode received stations.
Sent from my iPhone
...nr4c. bill
> On Dec 6, 2016, at 3:45 PM, Aaron K5ATG <k5atg.aa...@gmail.com> wrote:
>
> I am in the process
I have a Heil HM-12. Inexpensive and good sound.
Sent from my iPhone
...nr4c. bill
> On Dec 4, 2016, at 9:24 AM, Bruce Chadbourne <bruce.chadbou...@gmail.com>
> wrote:
>
> Greetings - I've had my K3 for 5 years, mostly a CW and digital operator.
> I've never done mu
You're only using one of the signals, either I or Q and at very low level. I
believe you'd get better service with the phones output. Fldigi is only looking
at the tip signal
Sent from my iPhone
...nr4c. bill
> On Dec 2, 2016, at 2:57 PM, John Pitz <crustac...@brig-elec.com&
Yes. The answer is NO!
Sent from my iPhone
...nr4c. bill
> On Dec 2, 2016, at 2:43 PM, Kevin - K4VD <ke...@k4vd.net> wrote:
>
> When using the KX3 with fldigi can I use the RX I/Q output from the radio
> to the computer? I can't find any reference to i/q in the fldigi docs
Not up on latest FW for PX3 but it sounds like your device has a later Beta
version than the official released version on website.
Sent from my iPhone
...nr4c. bill
> On Nov 30, 2016, at 3:55 PM, Kevin - K4VD <ke...@k4vd.net> wrote:
>
> Hi... I just got my new (used) PX
Note to self: When asked "What did you change since it worked before?" Is not
restricted to the radio system!
Sent from my iPhone
...nr4c. bill
> On Nov 30, 2016, at 7:30 AM, VE3WDM <ve3...@hotmail.com> wrote:
>
> I just wanted to give an update to my SWR
Is this where we should turn the BIG knob (DELETE KEY)?
Sent from my iPhone
...nr4c. bill
> On Nov 30, 2016, at 3:46 AM, Bill Bauer <monk1...@gmail.com> wrote:
>
>
>
> The strongest reason for the people to retain the right to keep and bear
> arms is, as a
701 - 800 of 1160 matches
Mail list logo
