of Mods. You will find our SSB Mod Compilation
here: http://www.qrpproject.de/UK/elecraft_k2.htm
72/3 de Peter, DL2FI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
and
European 2 Years Warranty can buy all Elecraft Products direct from QRPproject
in Berlin, Germany... and a lot HAMs did it :-)
73 de Peter, DL2FI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
It happened several times that the connector between DSP board and
Frontplate was not set properly into the corresponding Jack. (It´s easy to
place it just a millimeter parallel to the jack. If so, the front Mike does
not work.
73 de Peter, DL2FI
-Original Message-
From: elecraft-boun
Richard,
you can get this connector in different versions. The 2,1mm and 2,5mm look
very similar, bat of coarse they are not :-)
If you by accident use a 2.5 type it will result in exact the problem you
describe because the K2 Jack is 2,1mm
73 de Peter, DL2FI
-Original Message-
From
.
We proudly feel as a part of the Elecraft Family.
Peter, DL2FI and Nik, DL7NIK
QRPproject
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
a parallel design like the ZM2 or ZM4
(http://www.qrpproject.biz/UK/ZM4.html) or the Fuchs ATU
(http://www.qrpproject.biz/UK/multifuchs.htm) you will have the same amount
of selectivity as with a complete preselector.
73/2 de Peter, DL2FI
-Original Message-
From: elecraft-boun
Not too much. I only wish the K3 will get some wheels in future release. If
it had wheels, I could do Ham Radio in Quadrophonie (assuming the Sub RX is
installed) while skating.
72/3 de Peter, DL2FI, very tired
__
Elecraft mailing list
I assume you are using small bandwith CW filters. You should turn off NR
because it is useless at small bandwith and may be the source of not
smooth qsk
72/3 de Peter, DL2FI
- Original Message -
From: Wolfgang Schwarz -DK9VZ- w...@dk9vz.com
To: elecraft@mailman.qth.net
Sent: Tuesday
-7000 please share your experience. How do you
use automatic bandswitching? Do you use the ALC? Best help would be a short
description how to connect K3 to FL-7000.
73 de Peter, DL2FI
__
Elecraft mailing list
Home: http://mailman.qth.net
additional
information. (which would cause more keys)
72/3 de Peter, DL2FI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
, it is
defective.
This K3 was eorking like a champ after changing the cap.
I know, there could be a lot of other reasons to find am RX deaf, but
because it was not my first blown cap, i think it´s worth to be checked.
72/3 de Peter, DL2FI
torroides. If they are soldered correctly,
they stay stable for a whole live without any problem. My Fieldtest K2
Serial 09 has never seen any glue but is still working like a champ :-)
73 de Peter, DL2FI
-Ursprüngliche Nachricht-
Von: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
more expensive to
start a 6 Month war against the custom burocracy then paying the 2-5% custom
fee.
73 de Peter, DL2FI
www.QRPproject.de
Von: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Im Auftrag von David Andrews
Gesendet: Montag, 24. November 2008 10:04
An: elecraft@mailman.qth.net
13 matches
Mail list logo