Re: [Elecraft] [Elecraft-KX] On the threshold of a dream

I recently pulled my TenTec Omni V off the shelf and what a treat to have a radio that I could clearly see all functions. It is a nice tan/beige color. My KX3 system sits at an angle so I can see it clearly, but it is in the house 95% of the time. Remember when most computers were a tan color . I

Re: [Elecraft] ARRL Antenna Book (and other antenna books)

I used an online question site for my Extra Class study years ago and this site showed which questions I missed. I used my Handbook and Antenna book to study up on the questions I missed or was unsure of. Without them I would still be guessing and not know a darn thing. Two best investments I ever

Re: [Elecraft] Ham Radio Near HV Power Lines

Ever seen lightning strike one of those power line structures ? I have. More than your imagine will run wild. ⚡️⚡️ On Tue, Apr 27, 2021 at 10:03 PM Wilson Lamb wrote: > The imagination runs wild...shunt feed a power pylon on 160m! > Midnight climb? > Bribery of lineman. > Inconspicuous

Re: [Elecraft] Inverted L for 160 meters

I use a L for all HF band . One wire going up about 60 feet then goes horizontal about 85 feet or so. I use a somewhat equal length elevated radial about 10-12 feet off the ground. I use a couple of auto couplers, depending on the radio . A Icom AH-4 for my Icom radios and an SGC 230 for anything

Re: [Elecraft] Foot Switch Doesn't Work - Now Working

Along the same line, use this thinking with your PL259/SO239 connectors. Sometimes even new ones don’t make a solid connection. > > > -- Rick Genesis 1-29 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

Re: [Elecraft] K3: K3S shuts down

Clean the fuses and holders. On Wed, Mar 11, 2020 at 8:02 PM Bob McGraw K4TAX wrote: > Power supply over or under voltage? > > Bob, K4TAX > > > Sent from my iPhone > > > On Mar 11, 2020, at 6:54 PM, Nr4c wrote: > > > > A friend has a K3S (sn 1006x) and it has started to just shut down on >

Re: [Elecraft] Missing AM mode

Sounds like the AM mode has been disabled in the menu. On Sat, Aug 31, 2019 at 8:44 PM rich hurd WC3T wrote: > What model radio? > > On Sat, Aug 31, 2019 at 20:11 Gerry Miller wrote: > > > A few days ago I discovered that the AM function is missing from the > > display. AM is missing from all

Re: [Elecraft] OT: Distracted driving

As a rover several years ago I operated mobile between grids. I had a F150 regular cab in which I used a Icom 706mk2g. The body of the radio was mounted behind the seat with the head unit mounted on the dash. I used a one earpiece headset mic plugged into the radio body and I used a footswitch

Re: [Elecraft] K4 in its first WPX

Lucky guy you are. But really, interaction with the owner/designer is something special. One of many things that go to making Elecraft,Elecraft. And putting yourself behind the wheel gives us all confidence in the product we buy. Thanks for your impressions. On Mon, May 27, 2019 at 10:23 PM Wayne

Re: [Elecraft] Antennas for portable ops

I really like the Par HF omni’s. Mono band but so easy to swap out and swr adjustment is so easy a caveman can do it. And they work great. I bought a long gun case and store all the elements, band modules,coax, balun, and tools. Just grab and go. No hiking, just drive up locations for these old

Re: [Elecraft] Spam filtering

How are you folks during with all the fires ?  On Sat, Nov 10, 2018 at 8:47 PM Eric Swartz - WA6HHQ, Elecraft < e...@elecraft.com> wrote: > Thread now closed (including related SPAM discussion threads. :-) > > 73, > Eric > Mooderator > elecraft.com > _..._ > > > > > On Nov 10, 2018, at

Re: [Elecraft] OT - Sources for Vintage Radio parts

http://www.mrtwv.org/index.htm This is a great group that runs the museum and if you email someone will respond and then you can send pix of the other knobs and we may have something for you. Be sure to look around the page. Visit your nearest radio museum and be amazed at the quality stuff they

Re: [Elecraft] Grounding

I have used copper based Fel Pro anti seize to coat all my exposed ground system. Comparing msds sheets with Noalox,aluminum and copper based, the Fel Pro has much higher concentrations of copper and aluminum powder and has the addition of zinc powder. And much less expensive. As with food, the

Re: [Elecraft] Why Black

Remember when computers were mostly all a shade of beige ? VHT makes black krinkle paint available in auto parts stores. Three coat process by spraying in different directions. Looks great. -- Rick Genesis 1-29 __ Elecraft mailing list

Re: [Elecraft] OT: CW Paddle A/B switch

A spst switch on one “hot” line will suffice and let you use both rigs at the same time. No need for a splitter. Wire both to the key with switch line going to one rig. On Sun, Mar 11, 2018 at 3:43 PM Nr4c wrote: > Why a switch. Unless you’re gonna have both rigs on at same

Re: [Elecraft] KX3 AND BAND DECODER

Check this out. http://www.nx1p.net/what-is-a-kx3-band-decoder/ -- Rick Genesis 1-29 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] Mobile from 117 VAC

I used a Swan 14A converter way back when. Never noticed any bad hash. Just the whine when I keyed down. > > > > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > __ > Elecraft mailing list > Home:

Re: [Elecraft] Charging IMEDION2400 mAh batteries?

I have used these same batteries since my purchase of the kx3 several years ago. They work great and have a fantastic shelf life. Same charger also. Slow and steady is good. On Saturday, October 1, 2016, David F. Reed wrote: > I have these MEDION2400 mAh batteries that I am

Re: [Elecraft] Is there a 1500w amp from Elecraft in our future??

I am very fortunate to have been to the SWODXA DX dinner one year and saw a 1kw or more Elecraft prototype. I am sure there are photos out there somewhere but it was a nice looking amp. It created lots of buzz that evening. Then it was scuttled off to parts unknown to never be seen by the masses.

Re: [Elecraft] KX3 2M External amp -- go linear!

> > If you want a real linear amp try to find a Teltec amp. Check out the QST > review. I have one each for 2,220,& 432 . -- Rick, W8ZT Sent from Gmail Mobile __ Elecraft mailing list Home:

[Elecraft] KX2

I don't want to come off as a "A-Hole" but the use of efhw for any end fed antenna is really getting out of hand. We as hams need to step up our game in regards to our communication skills of day to day speech. We, as hams,are regarded as communication specialists and this should go with our

Re: [Elecraft] Suppporting Products

At the very bottom of the main page. www.Elecraft.com On Tuesday, July 5, 2016, Doug Turnbull wrote: > Dear OMs and YLs, > I looked today for links to supporting products such as Fred Cady's > books, Nifty Guides, KX3 stands, add on heat sinks and such but am unable > to

Re: [Elecraft] RFI on K3s

I guess space might be a concern on large current supply's. There are ways around that but I was mainly thinking qrp level power supply's. On Mon, Jun 20, 2016 at 1:15 PM, Clay Autery <caut...@montac.com> wrote: > On 6/20/2016 12:03 PM, Rick Robinson wrote: > > Why, if t

Re: [Elecraft] RFI on K3s

Dave, you have brought up something I have wondered about for some time. I have had my kx3 for three plus years and have been on many lists and most everyone wants a smps instead of a small 3 amp linear supply. Radio Shack and many others made these supply's and they are plentiful at Hamfests for

Re: [Elecraft] [PX3] Keyboard, Mouse, Thumb Drive and Knob Support

I agree. Some take the radios and want to completely go out of the intended design. I was mostly referring to the possibilities and what might be used in the future of amateur radio. But I did expand my trail friendly kx3 to a great home unit with the addition of a px3 and the amp. So guilty as

Re: [Elecraft] [PX3] Keyboard, Mouse, Thumb Drive and Knob Support

One way to look at this is one of the purposes of amateur radio is to advance the state of the art. Yes, use it for what it is is fine. But if you are one of the few who have minds capable of new ideas and how to implement them, then more power to ya. Without those we might still be using a cats

Re: [Elecraft] Small QRP Xcvr Use Question

Par/LNR end fedz are a very popular choice. They work well and are easy to deploy. Several styles to suit your operating preferences. I also like the Par HF Omni angles. These are good for parks and locations where you can use a telescopic mast such as a flagpole. This is what I use . On Monday,

Re: [Elecraft] Travel Case for K3/s KX3

I second the MCM cases. And as a side note on MCM for rolling your own,they sell the soft pluck foam that I had been looking for years for. It is sized for their cases but they give you the deminsions which make it easy to get what you need. And it is very reasonably priced. On Tuesday, May 17,

Re: [Elecraft] Feature Request: ANT2 without ATU for KXPA100

Sounds like a simple antenna switch is your solution. Esp since you are using mag loops which do not use a tuner. I just bought a band decoder($75)from a lady on the group and you would need that and a remote switch that senses band voltages. Again a lot of investment . BTW your MO is in the mail.

Re: [Elecraft] IC-7300 video - things to come

I foresee Bluetooth or newer technology tablets or phone size units that control our radio as an option to control our radios . So touchscreen control seems like more than a fad. On Monday, March 28, 2016, Gary wrote: > Bill > I agree, similarly with an Elad, not my choice

Re: [Elecraft] KX3 Grounding & NiMH Batteries

If you do not use the 2 meter module you can do as I have and use the hole in the case for the 2 meter antenna. I used star washers to bite into the metal and have a 1/4" or so of a small machine screw sticking out. It does a great job of grounding the rig. On Sunday, March 20, 2016, TFJM via

Re: [Elecraft] OT: W8FGU Enclosure Website

Gotta add for those that have not dealt with Dave. Super quality work and a great up front guy to deal with. He keeps you informed as much as possible. I assume he is still a firefighter so keep in mind his 24 hour shifts. Looking forward to seeing your site back up and running. Currently doing

Re: [Elecraft] Accuracy of Wattmeter W2 under 2 Watt

I don't have the paperwork in front of me but the Elecraft DL 1 dummy load has provisions to measure power up to 20 watts with a 10% accuracy. Just use a dvm. They also make a WM1 that handles more power with a .5 dbm accuracy. On Sunday, October 25, 2015, Hajo Dezelski wrote:

Re: [Elecraft] KX3 VSWR problem

Could it be your load is not rated to 50 MHZ ? Some are only good to 30 MHZ. On Wednesday, October 7, 2015, WD4SDC wrote: > WD4SDC wrote > > MSG to Elecraft support unanswered (which seems uncharacteristic, based > on > > rep) > > I was contacted by elecraft support

Re: [Elecraft] K3S Build Progress: 1st power-on

Also using a bath towel under your work helps grab those little parts that amazingly grow legs and wander or jump off. On Thursday, September 17, 2015, ae...@carolinaheli.com < ae...@carolinaheli.com> wrote: > Well the Assembly so far has gone pretty well; other than the odd hardware > dance.

[Elecraft] 30% off today only on Lulu print books.

great place and time to pick up some of Fred's excellent books. Just a satisfied customer who gets email alerts from them after buying my Elecraft books. BTW, thanks Fred for writing such helpful material. -- Rick, W8ZT Sent from Gmail Mobile

Re: [Elecraft] 30% off today only on Lulu print books.

Sorry. The coupon code is SAVE30 On Thursday, August 27, 2015, Rick Robinson rickw...@gmail.com wrote: great place and time to pick up some of Fred's excellent books. Just a satisfied customer who gets email alerts from them after buying my Elecraft books. BTW, thanks Fred for writing

Re: [Elecraft] [OT] K3 Shack Pictures and iMacs

Check out the stand by Nifty Products. It works great for this old guys eyes. There is a link on Elecrafts site or Google it. On Friday, May 2, 2014, d...@lightstream.net d...@lightstream.net wrote: I bought a KX3 a few weeks ago and love the radio, but am struggling with the operating

Re: [Elecraft] Heat Sinks with machined call sign.

Gary, glad you posted. I wanted to thank you for the fantastic work on my heatsink. I don't get on eBay often so a big thanks to you. I have looked and listened to all the research and designs that have been around for several months and all seemed to have their place. I liked yours right off the

Re: [Elecraft] K3 suddenly dies

Take a small piece of scotchbrite pad and clean the fuses and holders if possible and use some deoxit to the fuse connector and fuses. They can build up a high resistance oxidation causing severe voltage drop. Then try the cable on the good supply. If that works then try the reworked cable with

[Elecraft] Griffin Imic used...

At Dayton exhibit. I'm trying to remember some things about it.,did it have the lightening connector? I have the newer model I Pad with the lightening connector and I want to be sure to get the right device to go between my KX3 and the I pad. How was it connected? Thanks to those with good

Re: [Elecraft] Griffin Imic used...

Really I do not need the 30 pin anything. My IPad is the 4th gen with the lightning connector.Just a way to get the Griffins male USB connector to the Apple lightining connector. It looks like the new lightning camera adaptor cable will work. It is a lightning male with a USB female. Seems to do

Re: [Elecraft] Griffin Imic used...

and charging but not accessories like the camera kit so don't go that way. Jeff, K7GDE On May 23, 2013, at 6:07 AM, Rick Robinson rickw...@gmail.comjavascript:; wrote: At Dayton exhibit. I'm trying to remember some things about it.,did it have the lightening connector? I have the newer

[Elecraft] Elecraft Hats at Dayton?

I'd like one also and some t shirts. Looked around but found nothing of interest. Please post info if you get a private reply. Thanks. On Tuesday, May 14, 2013, Scott Manthe wrote: I'd love an Elecraft hat, but missed out on them last year. I'm wondering if Wayne and Eric will have them this

Re: [Elecraft] LCD display of K2 changing in LED display

For a similar effect you may like the looks of using polarizing film. It reverses the display colors. Instead of black numbers on a orange background, it will give you orange numbers on a black background. The color will depend on the color of your display. Many fine examples and information on

Re: [Elecraft] LCD display of K2 changing in LED display

Your are pretty much stuck with the factory display. Take a look at what they do in the r75 group. It is a really neat look. Probably as close to a led display as you can get. It involves taking a piece of polarizing film and positioning it over the display until the numbers become clearly in

Re: [Elecraft] Benefits of Buying a Factory Assembled KX3

I purchased my KX3, #3508, factory assembled and I feel it was well worth the additional $100. Actually,it is quite a bargain after reading Eric's reply. I do have one question for Eric if he checks back on this post. My KX3 has every option and I was wondering if the temperature compensation is

Re: [Elecraft] OT: great deal on netbook

Thanks for the tip. For that price I will make a trip to see if one is available. I think to list good deals on Amateur radio accessories would be appropriate, especially since computers are as common as a key or mic in the hamshack or field. Thanks, Rick. On Mon, Mar 18, 2013 at 10:47 PM, Harlan

Re: [Elecraft] KX3 Mic input problem

As was mentioned previously, select ssb then go to the menu. I had the same issue and this solved my problem. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] K3 - Good deal on eHam??

This from Eham:W6ZR K3/Omni VII ads: scams/impersonat The text of today's two W6ZR ads are copied from earlier ads on other sites (Google some ad phrases to see them - an OMNI VII ad by W4CAK in 4/2011, and a K3 ad by W0IQ in 12/2012). I've contacted the real W6ZR (an honest ham) by phone and he

Re: [Elecraft] Anyone try interfacing the KX3 or K3 with the Ten-Tec 418 amp?

Search for ten tec amp on the Yahoo groups reflector for the KX3 as there was some discussion about this. Also search these archives as someone had the new TT amp for sale and they used a KX3 with it.. I think it was here. I also saw one for sale on E-Ham and I think it was the same person. On

Re: [Elecraft] Anyone try interfacing the KX3 or K3 with the Ten-Tec 418 amp?

Found the ad. E-Ham 2013-02-26 *W9TTWhttp://www.eham.net/user/profile/W9TTW * 317-443-7307 You can log in and email him. On Fri, Mar 1, 2013 at 9:36 PM, Jim Lowman jmlow...@sbcglobal.net wrote: Looks like it would be a good companion to all of my Elecraft QRP transceivers, should I ever

Re: [Elecraft] Questions on Yamaha CM-500 boom headset with K3

This may be apples to oranges, but, I use a Pyle headset with my kx3 and mine works with or without mic bias. But if I have the mic bias off the radio goes into scan mode. Don't know why. Just thought I'd mention this in case your K3 acts the same wayRick On Thu, Feb 28, 2013 at 9:00 AM,

Re: [Elecraft] Questions on Yamaha CM-500 boom headset with K3

because the K3 jack has no connection to the ring (that is why it is marked Mono - the jack is actually stereo. 73, Don W3FPR On 2/28/2013 9:15 AM, Rick Robinson wrote: This may be apples to oranges, but, I use a Pyle headset with my kx3 and mine works with or without mic bias

Re: [Elecraft] Questions on Yamaha CM-500 boom headset with K3

If I turn off the up/down in the menu then the radio stays on its frequency, regardless of using mic bias or not. More research to come. On Thu, Feb 28, 2013 at 8:58 PM, Jon Zaimes AA1K j...@verizon.net wrote: thanks Rick! On 2/28/2013 9:15 AM, Rick Robinson wrote: This may be apples

Re: [Elecraft] KPA500 - Rx Attenuation

Isn't this basically what the Roofing Filter option in the KX3 does. Waiting on mine to arrive this Thursday...Rick On Sun, Feb 10, 2013 at 6:08 PM, Eric Swartz WA6HHQ - Elecraft e...@elecraft.com wrote: Hi Gary, This is normal as the KPA500 is designed to attenuate signals the further you

Re: [Elecraft] KPA500 - Rx Attenuation

(and the K3) that attenuate signals below 1600 kHz are in the front end (closer to the antenna) so that strong broadcast signals below 1600 kHz will not overwhelm the T/R switch PIN diodes and cause them to be ineffective. 73, Don W3FPR On 2/10/2013 6:48 PM, Rick Robinson wrote: Isn't

Re: [Elecraft] KX3 Stand

After the good reports I ordered one also...Rick/W8ZT On Fri, Feb 8, 2013 at 9:51 AM, Fred Smith m...@mo-net.com wrote: Thanks everyone I JUST ORDERED ONE!! Fred/N0AZZ __ Elecraft mailing list Home:

[Elecraft] KX3 with external coupler

I am thinking of ordering the KX3 tonight. I will most likely order it with all accys. I have looked through the manual and some archives and would like to verify one thing and ask about another. First is the built in ATU. It looks like it can be set to bypass even if the atu is instaled. Am I

Re: [Elecraft] Kx3 for sale

Dang !!! I just ordered one. Oh well. A rare find, used Elecrafts don't come up for sale often. Someone will get lucky. On Thu, Feb 7, 2013 at 10:19 PM, Luther Stave w0...@ymail.com wrote: I have a kx3 for sale. It is great but I don't use it. I use my k3. This kx3 is an early model. It is