Don't be nervous they will be posted. I had the privilege of running W1AW/0
Nebraska CW as a guest op this past week great fun. I hope to get more op time
next go around.
73/Scotty/NU0S/Nebraska
Sent from my Verizon Wireless 4G LTE DROID
Dennis Moore den...@mail4life.net wrote:
Still
The best I've used for monitoring while working in the shack or letting my kids
listen to an active cw QSO is the speaker from my Drake TR4C. Otherwise I use
headphones most of the time...
Scotty/NU0S
K1-4...S/N. 3206
Sent from my Verizon Wireless 4G LTE DROID
Eddy k6...@yahoo.com wrote:
Do you have external power hooked up? That is an internal battery option.
If the external power source is hooked up when there are no icons you have five
watts.
73 Scotty NU0S
Sent from my Verizon Wireless 4G LTE DROID
Bruce Rattray ratt...@accesscomm.ca wrote:
I'm trying to set my FT-817 to
I changed out the headphone jack now the speaker is working again thank you.
What voltage am I looking for at TP1 SWR bridge adjustment??? mV - V? On the
KAT1.
T1 is wound correctly.
Relays all soldered.
Thank you,
Scotty/NU0S
Sent from my Verizon Wireless 4G LTE DROID
Hey I got the ATU figured out. My bad as the kids say. I did not exit the menu
when taking the tests. All the options are installed now. Now off to make more
QSO's. Ready for pbmme polar bear QRP weekend. Grrr...
73-Scotty-NU0S
Sent from my Verizon Wireless 4G LTE DROID
Scotty Long n
Don and all on the post thanks for help and input. The K1 is working/playing
great. Just worked Randy KB4QQJ on 40m with his KX3 sounding great as well. Now
I must save up for my K2...
73-Scotty-NU0S
Sent from my Verizon Wireless 4G LTE DROID
The modular design make repairs and modifications easy. Elecraft had a new part
out asap no questions asked.
Sent from my Verizon Wireless 4G LTE DROID
Ron D'Eau Claire r...@cobi.biz wrote:
Amazing how an easy work-around can take the pressure off of doing the
repair. I know that from lots of
Are there any headphone jack options/mods for the K1??? Not excited about
putting another short lived switch in...
Scotty/NU0S/ K1-4, 3206
Sent from my Verizon Wireless 4G LTE DROID
__
Elecraft mailing list
Home:
Mine as well and I usually just leave the headphones plugged in...
Sent from my Verizon Wireless 4G LTE DROID
Ron D'Eau Claire r...@cobi.biz wrote:
I don't know about options, but FWIW, it seems to be a problem with *some*
jacks. I still have the original headphone jack in my K2 (built in 2000)
.
--
73, Gary AB7MY
=
supp...@elecraft.com
Elecraft Technical Support
On 10/7/2013 11:46 AM, Scotty Long wrote:
Completed all trouble shooting as directed including hammer tap of
switch. No good.
/Sent from my Verizon Wireless 4G LTE DROID/
Gary Surrency g...@elecraft.com wrote
Yes it is not a big deal by any means as I use headphones about 100% anyway.
Just nice for listening to rag chews while working in the shack.
Sent from my Verizon Wireless 4G LTE DROID
Peter Eijlander (PA0PJE) pa0...@xs4all.nl wrote:
Ron D'Eau Clairer...@cobi.biz wrote:
in my K2 (built in
.
If your K1 has the internal battery option *and* you do not use that
option, the battery on/off switch can be re-purposed for the speaker
switch - or add your own ideas for a switch location.
73,
Don W3FPR
On 10/7/2013 4:35 PM, Scotty Long wrote:
Thank you I will try that. I'm looking at options
Just installed NB works great.
Newly installed KAT1 page 9 no appreciable value change volts when adjusting
C9...
Scotty/NU0S
Sent from my Verizon Wireless 4G LTE DROID
__
Elecraft mailing list
Home:
.
73,
Don W3FPR
On 10/5/2013 6:10 PM, Scotty Long wrote:
Just installed NB works great.
Newly installed KAT1 page 9 no appreciable value change volts when adjusting
C9...
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Sent from my Verizon Wireless 4G LTE DROID
Original Message
Subject: Re: [Elecraft] K1-4 s/n. 3206
From: Scotty Long n...@hotmail.com
To: d...@w3fpr.com
CC:
Put all back together less the tuner now internal speaker is not working.
Headphone jack normal audio. Any ideas
would suspect the headphine jack has
failed, but if it is a new K1, I would first suspect the crimp pins on
the speaker cable.
73,
Don W3FPR
On 10/5/2013 9:26 PM, Scotty Long wrote:
Sent from my Verizon Wireless 4G LTE DROID
Original Message
Subject: Re: [Elecraft] K1-4 s/n
, but the better news is that replacing he headphone
jack should fix it. Hopefully the new jack will last longer - it
usually does, but there is no guarantee other than the Elecraft 1 year
warranty on parts.
73,
Don W3FPR
On 10/5/2013 10:21 PM, Scotty Long wrote:
First test was good. Second test
Stan,
Is your address good on QRZ.com I will mail you a 4.7 ohm no charge... I only
have 5% 1/8-1/2 watt let me know...this will get you going till your stock
arrives...
73/Scotty/NU0S
Dick Dievendorff die...@comcast.net wrote:
I buy from Mouser (good for small quantities) or DigiKey. I
I said that and got laughed at...I beg to differ as it was key board to key
board CW full contest mode rude operators on 20m...30 to 40+++ wpm CW... No
casual fun operators it was full blow contest mode with everyone stepping on
each other... Just saying ... This is from a rookie ham licensed
ARRL Field Day...
Well I had a good time talking with friends and family that was about it. The
heat on Saturday here in Nebraska was terrible the measured temp inside my tent
was 104+ F with 90+++% humidity. But hey that's what is says in the course
description Other than favorable conditions.
battery so it didn't matter. :)
73 de Ray
K2ULR
KX3 #211
On Jun 24, 2013, at 12:12 PM, Scotty Long wrote:
ARRL Field Day...
Well I had a good time talking with friends and family that was
about it. The heat on Saturday here in Nebraska was terrible the
measured temp inside my
From: Scotty Long n...@hotmail.com
To: Ray Sills raysil...@verizon.net; elecraft Post elecraft@mailman.qth.net
Sent: Monday, June 24, 2013 2:34 PM
Subject: Re: [Elecraft] ARRL Field Day
Our club was running 5A with SSB and CW stations on 20m at the same time... Bad
screws, etc.
Hey, its all fun!
Regards,
Mark, K1RX
From: Scotty Long n...@hotmail.com
To: Mark Pride mpride...@yahoo.com; elecraft Post elecraft@mailman.qth.net
Sent: Monday, June 24, 2013 3:10 PM
Subject: Re: [Elecraft] ARRL Field Day
Very cool I told the guys
Also thanks for all the great info I will pass this to our field day
committee...
72/73/Scotty/NUØS
Scotty Long n...@hotmail.com wrote:
Thanks Mark have a great one...
72/73/Scotty/NUØS
Mark Pride mpride...@yahoo.com wrote:
Yeah, I feel your pain. This issue is an evolutionary
That's very cool Doug, have a great weekend and safe field day...Hope to work
you...
72/73/Scotty/NUØS
Doug Person k0...@aol.com wrote:
Well, I just replaced my 12 year old buried feed line with some new
double-shielded RG-8X. Just to test it out, I connected the antenna
system to the KX3.
On page 43 of K1 manual Q6 it calls out for a C5739...mine is a C2166 is this
ok ??? Or do I need a C5739 the errata is a bit confusing to a simpleton...
72/73/Scotty/NUØS
__
Elecraft mailing list
Home:
72/73/Scotty/NUØS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
72/73/Scotty/NUØS
Original Message
Subject: Re: [Elecraft] K1 #3206
From: Scotty Long n...@hotmail.com
To: d...@w3fpr.com
CC:
Very cool Don K1-4 #3206 is on line/alive and well first short QSO to TX with
W5GXV on 30m... the noise blanker and internal tuner are ready
72/73/Scotty/NUØS
Original Message
Subject: Re: [Elecraft] OT: Elevated vs. Buried Radials
From: Scotty Long n...@hotmail.com
To: Joel Black w4...@charter.net
CC:
Hey Joel I use a Hustler BTV4 as my main antenna as well as an inverted L for
80m and the WARC bands
Thanks Don for the K1 help...The XG3 sure makes alignments much easier. The
measured idle/receive current draw with back light mod is 63mA...I tuned in
beacons or W1AW and the VFO is right on the money...Now to RF board, part II
page 42...
72/73/Scotty/NUØS
K1 question VFO range test page 38;I have L1 adjusted with 32 turns red enamel
wire. The VFO is adjusted to 3.099 - 3.067. Is this normal or am I missing some
VFO range???
Thank you,
73/Scotty/NU0S
K1-4 number 3206 first power up checks all good first station I picked up NH6I
on 40m...back light kit is great perfect at lower brightness level...
73/Scotty/NU0S
__
Elecraft mailing list
Home:
Very cool Paul congratulations on your success!!! I hope to start my K1 very
soon it's in the mail...
Scotty NU0S Nebraska
Date: Tue, 29 Jan 2013 10:22:49 -0500
From: roc...@comcast.net
To: elecraft@mailman.qth.net
Subject: [Elecraft] My in-progress K1 is ALIVE!!!
Nobody at my house
33 matches
Mail list logo
