Very neat job! VY 73, Lance
On 7/16/2012 8:27 PM, Bill W4ZV [via Elecraft] wrote:
KH7T wrote
Is anyone contemplating a single lever key for the KXPD3 mounting?
No KX3 here yet but I made one for my ATS-3:
http://www.youtube.com/watch?v=wutov8MVr6Q
Maybe this will give you some
Hi Gary,
If it is still available, I would be interested. PSE let me know, and I will
send
you cash tmrw by mail. VY 73, Lance
On 7/13/2012 3:12 AM, Gary K9GS [via Elecraft] wrote:
Or just buy one of these:
http://www.unifiedmicro.com/sci6.htm
Hard to beat for $25.00.
BTWI
Hi Don,
Thanks for the update! It has taken more than 6 months to get through the
first 3
daysI sure hope things improve for the next orders! I ordered mine on Jan
11.
I would be interested in knowing how you interfaced yours to the computer, if
you
have done that. I will need to hit
Hi Don,
PSE let me know how you make out with the interface situation! I will have to
get
right on that when I get mine ;-) GL and VY 73, Lance
On 6/23/2012 3:38 PM, VE2DFO [via Elecraft] wrote:
Hi Lance:
I haven't tried that yet--just got it fired up yesterday( needed to get 8 AA
I sure hope you are wrong, because I ordered mine on Jan 11, 2012 and I am
leaving
with it (hopefully) on a 6m EME DXpedition to ZK2 at the end of August! Let's
both
keep our fingers crossed! Been into the 7th month of waiting now VY 73,
Lance
On 6/22/2012 10:30 PM, dr.diesel [via
On 6/22/2012 11:38 PM, dr.diesel [via Elecraft] wrote:
W7GJ, Lance wrote
I sure hope you are wrong, because I ordered mine on Jan 11, 2012 and I
am leaving
with it (hopefully) on a 6m EME DXpedition to ZK2 at the end of August!
Let's
both
keep our fingers crossed
On 5/16/2012 2:25 AM, wf8o [via Elecraft] wrote:
Just curious, when did you order yours? I wonder if they have worked
through much
of the initial rush.
73 Mike WF8O
-
If you reply to this email, your
I think I speak for all of us when I agree wholeheartedlytake the time you
need!!! GL and VY 73, Lance
On 3/27/2012 9:26 PM, Eugene Balinski [via Elecraft] wrote:
Wayne,
Thanks for the updates. We certainly understand and
really appreciate your attention to quality. We would all
Hi Ed,
I also need the same thing, as I am sure many people do. I need to figure out
a
solution as small as possible, since my KX3 and whatever additional
cables/interfaces/6m preamplifier, etc etc. need to all fit in the outside
pouch of
my laptop computer case for airline travel.
Any
Won't there be some sort of TERMINAL in the KX3 utility that will allow the
KX3 to
be keyed from the computer? I just discovered that was possible for the K3 ;-)
VY 73, Lance
On 3/12/2012 4:21 PM, KU7Y [via Elecraft] wrote:
When I started having the poor keying due to Windows being busy not
Hi Ed,
Yes, you can use your K3USB cable to gain access to the RTS line, but you would
have
to select the optional KXSER cable (no charge exchange) to mate it to your KX3.
Apparently there is space inside that DB9 connector to mount a small resistor
and
2N to change the HIGH RTS line
Anybody know if the KX3 can be set into XMIT mode via the RTS serial line from
the
computer going into ACC1? I looked in the manual, but I could not find it. I
know
many people with barefoot rigs or modern QSK amplifiers don't care if they are
running digital modes in VOX mode, but all my
Hi Jim,
TNX for your email and comments. Yes, I understand what you are saying and
appreciate that you have had good success running VOX with your QSK-capable
amplifiers.
However, my solid state 6M-1000 amplifier has a little mechanical antenna relay
in
it, and the last thing I can afford
Hello Olli,
The advantage is that I could possibly pull out the RTS line from my one RS232
cable
to the computer, and simply add it to the amplifier PTT plug in ACC2. I would
not
have to build a transistor switch to directly trigger the PTT line, which would
have
to be broken out from the
.
VY 73, Lance
On 3/5/2012 8:29 PM, Jim Brown-10 [via Elecraft] wrote:
On 3/5/2012 11:09 AM, W7GJ, Lance wrote:
However, my solid state 6M-1000 amplifier has a little mechanical antenna
relay in
it, and the last thing I can afford to do is to hot switch that amp on a
6m EME
What is in the KX3 ACCESSORY CABLE KIT referenced in the manual and how much
does
it cost? I can not find it on the order form anywhere...Maybe I just can't
figure
out where to look for it. VY 73, Lance
On 3/4/2012 11:33 PM, wayne burdick [via Elecraft] wrote:
A preliminary version of the
Think it would work at 10 in JT65A mode? 48 seconds on and 72 seconds off,
hour
after hour? VY 73, Lance
On 3/3/2012 12:17 AM, wayne burdick [via Elecraft] wrote:
Jim Dunstan wrote:
The KX3 specifications indicate a nominal 10 watts output. When
operating a mode such as PSK, which
Is there a KX3 list somewhere? I would like to subscribe to that instead... I
can't
find one :-( There is much too much info on here that has nothing to do with
the
radio. TNX and VY 73, Lance
On 2/22/2012 6:39 PM, Richard Gracer [via Elecraft] wrote:
Can we make this reflector work
Hello Igor!
PSE tell your friend that I am ready to run a JT65A sked with him when he gets
an amp
and license for 6m! I am eagerly awaiting the chance to run with some UA9
stations
on 6m EME during your moonrise! GL and VY 73, Lance
On 2/10/2012 3:33 PM, Igor Sokolov-2 [via Elecraft]
Hello Franco,
GL getting your K3 and KPA500 working! If you CAN get it going, please think
about a
6m sked with me on JT65A during your moonset next week!!! MNI TNX and VY 73,
Lance
--
Lance Collister, W7GJ
(ex WA3GPL, WA1JXN, WA1JXN/C6A, ZF2OC/ZF8, E51SIX, 3D2LR, 5W0GJ)
P.O. Box 73
One thing that disappointed me is that this very useful cross-mode feature (at
least
on 6m, where I do most of my operating), is available only if you are running
VOX mode.
I am not sure why it has been excluded when you run with a footswitch or
sequencer to
trigger the PTT line. I NEVER
21 matches
Mail list logo
