Another suggestion is to have the main tuning knob change the left number and
the VFO B knob change
the right number. This way you can increment or decrement either.
Frank - W4NHJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Simple-NR-NB-feature-suggestion
:19 -0600, Radio Amateur N5GE wrote:
...
And I had to walk two miles in the snow to school every morning...
Yea, and uphill both ways.
Frank - W4NHJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
Communications Concepts can help. www.communication-concepts.com/
Frank - W4NHJ
Julius Fazekas n2wn wrote:
Wondering if anyone has a suggestion of a solid state amp or pushing the
K3 PA to obtain 150 watts out on 160m?
A kit or HB would be fine...
73,
Julius
n2wn
--
View
If you have an SDR type panadaptor using the IF out signal, you can try a
peaking filter by downloading and running WinRad software. WinRad has a
peaking filter that works great.
Frank - W4NHJ
- Original Message -
From: Bill Tippett btipp...@alum.mit.edu
To: elecraft@mailman.qth.net
be
implemented using the K3 utility.
Frank - W4NHJ
- Original Message -
From: Ian White GM3SEK gm3...@ifwtech.co.uk
To: elecraft@mailman.qth.net
Sent: Monday, August 10, 2009 8:25 AM
Subject: Re: [Elecraft] K3: Band edge beep?
Jim Kvochick wrote:
I had a chance to play with my new K3
Guess what Lee, I have blown 3 serial ports. Not sure why you would think
high RF will blow a USB to serial converter and not a serial port. FYI I
built a cable using CAT 5 cable as suggested on this site and have not had a
problem since.
Frank - W4NHJ
- Original Message -
From
Not a push up mast, but inexpensive.
http://www.freewebs.com/workingstiff/pgtwoofmastchoices.htm
Frank - W4NHJ
- Original Message -
From: Phil LaMarche plama...@verizon.net
To: 'Elecraft_List' elecraft@mailman.qth.net
Sent: Friday, July 17, 2009 11:24 AM
Subject: [Elecraft] K3
I'll
I used WAL MART Color Place Rust Control spray paint to finish a pair of
homebrew speaker cabinets to match my K3. It is Black Satin (21049), which
I believe is between flat and semi-gloss. It looks very close to the
Elecraft K3 paint.
Frank - W4NHJ
- Original Message -
From: Jack
noticable.
It appears this problem may only exist in newer K3s. MY SN; 3121.
Frank - W4NHJ
- Original Message -
From: Ron D'Eau Claire r...@cobi.biz
To: Elecraft@mailman.qth.net
Sent: Thursday, June 25, 2009 7:54 PM
Subject: Re: [Elecraft] K3 QSK
I sat down in TEST mode and tried all
Try http://www.communication-concepts.com/
I built one of their 140 watt amps for a 20 meter HB SSB rig. I only have
it configured for one band, 20 meters, but left room to add filters for all
HF bands. It works great.
Frank - W4NHJ
- Original Message -
From: KM4VX ronce
my
mistake.
Frank - W4NHJ
- Original Message -
From: Walter V. Gilles wvgil...@yahoo.com
To: elecraft@mailman.qth.net
Sent: Thursday, June 11, 2009 12:49 AM
Subject: [Elecraft] K3: Peculiar BW behavior?
Greetings,
I just came across what seems to be a rather peculiar operational quirk
I believe I read somwhere that you can do a mod to Astron power supplies to
make the float chargable. They sell supplies that say they are for battery
back-up, I suspect they are already modified for float charge.
Frank - W4NHJ
- Original Message -
From: Ron D'Eau Claire r
Make sure Config:Tx Inh is not set to HI = Inh.
Frank
- Original Message -
From: Jack Smith jack.sm...@cliftonlaboratories.com
To: Dale Harding K7DNH dh2...@sbcglobal.net
Cc: elecraft@mailman.qth.net
Sent: Sunday, June 07, 2009 7:16 PM
Subject: Re: [Elecraft] K3 no transmit - after
Steve,
I posted two photos on the K3 Yahoo group. The album name is K3 speakers.
Frank - W4NHJ
- Original Message -
From: Steve Ellington n...@carolina.rr.com
To: Frank Ross W4NHJ w4...@comcast.net; elecraft@mailman.qth.net
Sent: Saturday, June 06, 2009 7:50 PM
Subject: Re: [Elecraft
the K3. The speakers sounded much better in the cabinets and
they look good also. Saved $200 and I think they sound better then the
Japanese speakers in the metal cabinets.
Frank - W4NHJ
- Original Message -
From: Don Greenbaum d...@aurumtel.com
To: elecraft@mailman.qth.net
Sent: Saturday
If you don't mind using a hex wrench/driver to tighten the screws check this
part number from McMaster 3/16 None 91253A104 6.33 per Pack of 50
Frank - W4NHJ
- Original Message -
From: Bill W4ZV btipp...@alum.mit.edu
To: elecraft@mailman.qth.net
Sent: Monday, May 25, 2009 9:53 AM
Sorry gang, these have a head angle of 82 degrees. Thanks to the gent that
said the K3 needed 100 degree flat heads.
Frank - W4NHJ
- Original Message -
From: Frank Ross W4NHJ w4...@comcast.net
To: elecraft@mailman.qth.net
Sent: Monday, May 25, 2009 11:15 AM
Subject: Re: [Elecraft] [K3
amps, I
think the ham can do a better job then many of the vendor amps. If you want
a fully integrated amp for the K2 and/or K3 that will be a little harder and
you might want to wait for Elecraft.
Frank - W4NHJ
- Original Message -
From: Matt Palmer kd8...@gmail.com
To: Elecraft
How about adding a built in tuner in the KPA-800/1500 that would work even
when you ran 100 watts from the K2 or K3 with the amp in standby?
Frank - W4NHJ
- Original Message -
From: Rudy Bakalov r_baka...@yahoo.com
To: 'Elecraft Reflector' elecraft@mailman.qth.net
Sent: Monday, May 18
I ment to say auto tuner.
Frank
- Original Message -
From: Frank Ross W4NHJ w4...@comcast.net
To: 'Elecraft Reflector' elecraft@mailman.qth.net
Sent: Monday, May 18, 2009 9:40 PM
Subject: Re: [Elecraft] KPA-800 KPA 1500
How about adding a built in tuner in the KPA-800/1500 that would
I wonder if a dab of black candle wax on the conical portion of the screw
head would give some lubercation and prevent the paint from scratching?
Frank
- Original Message -
From: Erik N Basilier ebasil...@cox.net
To: rfenab...@gmail.com; Elecraft Elecraft@mailman.qth.net
Sent: Monday,
. I think that listening to slow canned code while
reading what is being sent and sending over top of the canned code will
teach proper timing.
My two cents.
Frank -W4NHJ
- Original Message -
From: Ron D'Eau Claire r...@cobi.biz
To: elecraft@mailman.qth.net
Sent: Friday, May 08, 2009 8
Don,
I thought I read some where that you can use the 13 kHz filter to transmit
AM by using the transmit DSP to limit modulation bandwidth.
Frank
- Original Message -
From: Don Wilhelm w3...@embarqmail.com
To: n4z...@yahoo.com
Cc: elecraft@mailman.qth.net
Sent: Sunday, May 03, 2009
23 matches
Mail list logo
