Henry,
Nice solution, but it considers only a connection to a PC. If that is
all you want, that is fine.
The KIO2 AUX I/O connector also contains internal K2 signals that are
used for an externally mounted KPA100/KAT100 as well as the XVseries
transverters.
73,
Don W3FPR
On 3/12/2019 10:
Yes that is the downside to it, so something to consider for those who may
want that option.
On Tuesday, March 12, 2019, 11:03:46 AM EDT, Don Wilhelm
wrote:
Henry,
Nice solution, but it considers only a connection to a PC. If that is
all you want, that is fine.
The KIO2 AUX I/O c
On my K2 I installed a USB Mini-B Female 5V DB9 interface in place of KIO2
Part # DB9-USB-D5-F
It's powered by the computer not the K2 so it draws no power from the K2
On Tuesday, March 12, 2019, 10:10:05 AM EDT, Pawlak, Daniel L
wrote:
I just built the KIO2 and installed it with my
I just built the KIO2 and installed it with my KBT2 and KAT2 already in place.
It was a tight fit, but did not restrict the module or the cable. Keeping it
neat using cable ties is essential when you re-install the top cover so that
they do not get pinched or lay on top of the RF board. The prob
4 matches
Mail list logo
