Bruce,
As original as it gets is Tom's own documentation. BTW, the board
header goes in K2 RF Board J13 which has power for the circuit as well
as the 8R signal. Solder the header into J13 and mount the output javk
on the rear panel - populate the board and plug it in.
Go to Tom's website
Don Wilhelm wrote
> Send an email to FAR Circuits to see if they have the N0SS Amp Keying
> Circuit for the K2 available.
Don -
I contacted FAR Circuits about the N0SS Amp Keying Circuit, and heard right
back from Fred.
He can, in fact, supply that PCB (as well as, he informed me, a PCB for the
Eric,
Send an email to FAR Circuits to see if they have the N0SS Amp Keying
Circuit for the K2 available.
If you must go the perfboard route, it is not difficult if you follow
the board layout shown on Tom Hammond's (SK) website
http://www.mmccs.com/mmarc/n0ss/index_k2.html. Most of the
Dear Gang:
I know one could take the PTT signal from the now-discontinued K60XV board, and
it is provided on the K2/100 lid, but are there any other option boards that
one can use to provide an external PTT signal?
If not, is anyone making the N0SS ptt out boards? I'm trying to avoid the
4 matches
Mail list logo