[Elecraft] Alignment and Test Part 2

I am not getting any significant signal input from the antenna and the loss seems to be at D6. In trying to determine whether D6 is at fault, I'm measuring 7.13 volts on the anode and 7.31 volts on the cathode. The manual indicates they should be 8.0 and 7.5 volts respectively. On D7, I'm

RE: [Elecraft] Alignment and Test Part 2

Dave, It would appear from those readings that either you have D6 or D7 installed backwards or that both the 8R and 8T voltage lines are active, and they should be mutually exclusive. First check the diode orientation against the Parts Placement Diagram in the rear of your manual, and if these

Re: [Elecraft] Alignment and Test Part 2

- Original Message - From: W3FPR - Don Wilhelm [EMAIL PROTECTED] To: Cyberider [EMAIL PROTECTED]; Elecraft@mailman.qth.net Sent: Saturday, April 02, 2005 10:49 AM Subject: RE: [Elecraft] Alignment and Test Part 2 Dave, It would appear from those readings that either you have D6 or D7

RE: [Elecraft] Alignment and Test Part 2

AM Subject: RE: [Elecraft] Alignment and Test Part 2 Dave, It would appear from those readings that either you have D6 or D7 installed backwards or that both the 8R and 8T voltage lines are active, and they should be mutually exclusive. First check the diode orientation against