gleberg Cc:
> elecraft@mailman.qth.net Subject: Re: [Elecraft] Band decoder ala KRC2 Dave,
> that is on my radar.73,Jim> On May 14, 2021, at 4:08 PM, Dave Fugleberg
> wrote:> > Depending on your needs, the BCD-14 from
> Unified Microsystems is worth a look. I use the older model BCD-
It's available from DX Engineering
https://www.dxengineering.com/parts/ums-bcd-1473,Gary K9GS
Original message From: Jim Cary Date:
5/14/21 4:14 PM (GMT-05:00) To: Dave Fugleberg Cc:
elecraft@mailman.qth.net Subject: Re: [Elecraft] Band decoder ala KRC2 Dave,
that is on my
microHAM Station Master:
https://www.microham.com/contents/en-us/d132_SM.html
http://microham-usa.com/store/product-info.php?pid12.html
73,
... Joe, W4TV
On 2021-05-14 3:36 PM, Jim Cary wrote:
Looking for a band decoder similar to the discontinued KRC2 for my K3 to
control my
Hi Cary,
I am happy with the products from RemoteQTH
https://remoteqth.com/arduino-band-decoder.php
Antenna switch https://remoteqth.com/six-to-one-antenna-switch.php
73 de Chris, DL2MDU
Am 14.05.21 um 21:36 schrieb Jim Cary:
Looking for a band decoder similar to the discontinued KRC2 for
Decades ago I bought Top Ten band decoders for my Yaesu transceivers. When I
purchased Elecraft K3s radios I rewired them and they have worked perfectly
for switching my Array Solutions SixPak antenna relay box. Newer models are
called Band-Aide Band Decoders can control many more relays than
Dave, that is on my radar.
73,
Jim
> On May 14, 2021, at 4:08 PM, Dave Fugleberg wrote:
>
> Depending on your needs, the BCD-14 from Unified Microsystems is worth a
> look. I use the older model BCD-10 for some external transverter switching
> with my K3.
> It’s just the populated PCB;
Depending on your needs, the BCD-14 from Unified Microsystems is worth a
look. I use the older model BCD-10 for some external transverter switching
with my K3.
It’s just the populated PCB; you have to provide your own wiring and
connectors. The price is right though.
73 de W0ZF
On Fri, May 14,
That’s odd. I just entered KRC2 in the search box on the main Elecraft page and
it took me right to it.
73,
Bill WE5P
Comfortably Numb
> On May 14, 2021, at 15:48, Jim Cary wrote:
>
> Jack,
>
> Thanks. I couldn’t find it on the website and when I called the sales
> customer service line
Jack,
Thanks. I couldn’t find it on the website and when I called the sales customer
service line they had no idea what I was talking about!
Jim
> On May 14, 2021, at 3:40 PM, Jack Brindle wrote:
>
> The KRC2 is still on the Elecraft web site, available for order. I would have
> been told
The KRC2 is still on the Elecraft web site, available for order. I would have
been told if it were discontinued, and have not been so notified.
url is:
https://elecraft.com/products/krc2-band-decoder-with-relays-k-line-and-k2
Looking for a band decoder similar to the discontinued KRC2 for my K3 to
control my antenna switch. Doesn’t have to have a lot of bells and whistles.
Would appreciate any suggestions.
Tnx and 73,
Jim
W2SM
__
Elecraft mailing list
I need to get cracking on how and what to use for band decoders on my soon to
be K3...
I currently use Top Ten boxes and haven't printed out the manual for the K3 as
my printer is on the blink..
Does Top Ten make boxes for the K3 ??
is there a home brew model I can makesaving some $$
: [Elecraft] Band Decoder
I need to get cracking on how and what to use for band decoders on my soon
to be K3...
I currently use Top Ten boxes and haven't printed out the manual for the K3
as my printer is on the blink..
Does Top Ten make boxes for the K3 ??
is there a home brew model I can make
Sam;
I would be remiss if I didn't point you at the Elecraft KRC2. It
connects to the K3's Aux IO port using the AuxBus data supported by
the K3. The KRC2 gives you up to 16 high (normally +12V, but can drive
up to 45 volts) and low-drive (sinking to 0 volts), directly
controlled by the
at $25.
Top Ten and Array Solutions are other sources of band
decoders with more features at higher prices.
Dave Hachadorian, K6LL
Yuma, AZ
- Original Message -
From: k9sd k...@ezl.com
To: elecraft@mailman.qth.net
Sent: Friday, April 17, 2009 12:02 AM
Subject: [Elecraft] Band Decoder
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dick
Dievendorff
Sent: Thursday, April 16, 2009 8:17 PM
To: 'k9sd'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Band Decoder
I know of the Elecraft KRC2, the Top Ten Devices decoder for
Yaesu, and Unified Microsystems has a very
I confirm the TopTen Band Decoder works fine with my K3, Andy.
Chris G3SJJ
Andrew Faber wrote:
Chris,
Good luck with it. I have the TT Decoder powered by an independent 12
volt source. It has internal pull-up resistors, so there appears to
be no connection needed other than the ones I
I wondered if any has connected up a TT Band Decoder to the ACC socket
yet. I am just about to make up a suitable cable. Also theer was some
discussion somewhile back about TX Inhibit for connecting to amps.
Anyone done this. I see it needs an external +5v source.
On my FT1kMP use the band
to bottom, looking
at the radio from the back).
73, andy, ae6y
- Original Message -
From: G3SJJ [EMAIL PROTECTED]
To: Elecraft elecraft@mailman.qth.net
Sent: Tuesday, January 29, 2008 11:46 AM
Subject: [Elecraft] Band decoder and Tx Inhibit
I wondered if any has connected up a TT Band
- Original Message - From: G3SJJ [EMAIL PROTECTED]
To: Elecraft elecraft@mailman.qth.net
Sent: Tuesday, January 29, 2008 11:46 AM
Subject: [Elecraft] Band decoder and Tx Inhibit
I wondered if any has connected up a TT Band Decoder to the ACC
socket yet. I am just about to make up a suitable
Subject: Re: [Elecraft] Band decoder and Tx Inhibit
Oh thanks for that Andy. I'll get it wired up in the morning with
confidence then! I know that Dave N3RD (of Top Ten) and Sig N3RS are
eagerly awaiting their K3s and will also be interested.
73 Chris G3SJJ
Andrew Faber wrote:
Chris,
I
: Greg - AB7R [EMAIL PROTECTED]
To: 'G3SJJ' [EMAIL PROTECTED]; 'Andrew Faber'
[EMAIL PROTECTED]
Cc: Elecraft elecraft@mailman.qth.net
Sent: Tuesday, January 29, 2008 3:53 PM
Subject: Re: [Elecraft] Band decoder and Tx Inhibit
Only issue is that the Mic and Headphone jacks on the back
are pretty
: Re: [Elecraft] Band decoder and Tx Inhibit
Oh thanks for that Andy. I'll get it wired up in the morning with
confidence then! I know that Dave N3RD (of Top Ten) and Sig N3RS are
eagerly awaiting their K3s and will also be interested.
73 Chris G3SJJ
Andrew Faber wrote:
Chris,
I have my
Andy,
All the small connectors on the rear panel are 3.5mm.
Greg
-Original Message-
From: Andrew Faber [mailto:[EMAIL PROTECTED]
Sent: Tuesday, January 29, 2008 4:05 PM
To: [EMAIL PROTECTED]; 'G3SJJ'
Cc: Elecraft
Subject: Re: [Elecraft] Band decoder and Tx Inhibit
Greg,
I don't
24 matches
Mail list logo
