Skip
There is a a discussion on the Elecraft .io forum where a popular power supply
manufacturer describes the difference between a Power Suppy and Charger. The
manufacturer pointed out that using a power supply to charge lithium batteries
is risky, because current is usually not regulated and
ectly.
> > 73 de RayK2ULRKX3 #211
> >
> >
> >
> > -Original Message-
> > From: Jim Finan
> > To: Mark Moeller ; 'Elecraft' <
> > Elecraft@mailman.qth.net>
> > Sent: Mon, Jul 29, 2019 5:24 pm
> > Subject: Re: [Elecraft] Charger
>
sage-
> From: Jim Finan
> To: Mark Moeller ; 'Elecraft' <
> Elecraft@mailman.qth.net>
> Sent: Mon, Jul 29, 2019 5:24 pm
> Subject: Re: [Elecraft] Charger
>
> Mark,
>
> Try Pro Audio Engineering they have a good one that work for KX2 and KX3
> with PX3:
>
I second the motion on the Pro Audio Engineering supply. I have one for my
KX3... it's compact and does the job perfectly.
73 de RayK2ULRKX3 #211
-Original Message-
From: Jim Finan
To: Mark Moeller ; 'Elecraft'
Sent: Mon, Jul 29, 2019 5:24 pm
Subject: Re: [Elecraft] Charger
Mark
Mark,
Are you really looking for a charger, or do you want a power supply?
If a power supply, take a look at the PAE Kx33 from Pro Audio
Engineering (do a Google search).
If you really want a charger, use what is recommended by the supplier of
the battery that you wish to use.
73,
Don
...@gmail.com
Sent: July 29, 2019 4:29 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] Charger
Appreciate any recommendations for a 110v charger for my KX2. This would be
to use while I am running at my home. Thanks
KA9LWK
--
Mark A. Moeller
317-225-6630
mark.moell...@gmail.com
Appreciate any recommendations for a 110v charger for my KX2. This would be
to use while I am running at my home. Thanks
KA9LWK
--
Mark A. Moeller
317-225-6630
mark.moell...@gmail.com
__
Elecraft mailing list
Home:
Works as expected now! This is problem is now resolved by a more serious
reseating of the KXBC3 board (as is suggested in the manual). Also, kit
builders should take care with the wire routing.
Elecraft has certainly got a jewel here. They rock! And, many thanks to
Rich, AC7, for responding.
73,
I was using Lithiums and when they died I installed fresh NiMH and then
worked the Baltic on 5 watts. Then I enabled the charger for 8 hours. The
next day the charge setting in the menu displays ERR BC3 in VFO B, d=002 in
VFO A. This locks the display with those messages until the KX3 is power
Why doesn't Elecraft put a gel cell charger kit out for the K2 users???
N2DH
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
10 matches
Mail list logo