Hello,
normally I use a Heil Pro-Set with IC-4 and the red Kenwood-adapter for
my K2 and for my K3 , too. Now I decided to buy a cheaper headset for
my K2 which I do not use very often.
I bought a computer-headset which has a modified connector and it should
be ready for
Hodger,
It sounds like you have the K2 microphone configuration jumper wired
straight across for all pins - and that is not correct for Kenwood wiring.
You must connect mic pin 5 to the +5 volt line (which is across from pin 6)
If the microphone is wired to work with a Kenwood transceiver,
On Jul 1, 2008, at 8:43 AM, Holger Doerschel wrote:
If I connect the new headset the K2 freezes and ELEC is shown on the
display. Note: the resisior has not been soldered yet. If I remove
the jumper and conect my Heil Proset it works fine.
You are probably shorting out the 5V mic bias
On Nov 16, 2007 6:49 AM, Christopher A. Kantarjiev [EMAIL PROTECTED] wrote:
I was inspired to try to adapt the headset I use for VOIP to the K2, since I
wanted to play with SSB a little. I got the idea from something that W2ENY is
selling on ebay :-) I'm writing this up so it's in the archives
On Nov 16, 2007 2:52 PM, Tom Hammond [EMAIL PROTECTED] wrote:
Hi Julian:
Once you get your K3, and try to silky-smooth VOX _it_ offers, you
might change your mind.
I'm (still) not a 'fan' of phone either, but I must admit (grudgingly)
that the K3 has taken a LOT of my dislikes away...
Did
Hi Julian:
You might have saved a bit of time if you had found this page:
http://www.g4ilo.com/k2_headset.html , Chris. Mine works fine with
VOX, though I'm not a big fan of phone either.
Once you get your K3, and try to silky-smooth VOX _it_ offers, you
might change your mind.
I'm (still)
Right now, with my level of Morse, CW is more bedlam!
On 16/11/07 16:31, Julian G4ILO [EMAIL PROTECTED] sent:
and I can think of few things more mind-numbingly tedious
than shouting my call over and over again into the bedlam that is an
SSB contest.
--
Now, here, you see, it takes all the
And the K3 will help in reading CW - I must try not to let it become a
crutch
On 16/11/07 17:24, David Pratt [EMAIL PROTECTED] sent:
In a recent message, David Ferrington, M0XDF [EMAIL PROTECTED]
wrote ...
Right now, with my level of Morse, CW is more bedlam!
Keep practising, David ;-)
In a recent message, David Ferrington, M0XDF [EMAIL PROTECTED]
wrote ...
Right now, with my level of Morse, CW is more bedlam!
Keep practising, David ;-) Get yourself proficient in readiness for
your K3 to arrive. With perseverance it won't take long.
73
--
David G4DMP
Leeds, England, UK
Walking with a crutch is better than not walking at all!!!
73, doug
Date: Fri, 16 Nov 2007 17:35:54 +
From: David Ferrington, M0XDF [EMAIL PROTECTED]
Thread-Topic: [Elecraft] computer headset for K2/K3 SSB
Thread-Index: AcgodyNjYiI3eJRqEdyKZAAwZcawbA==
And the K3 will help
Julian G4ILO wrote:
You might have saved a bit of time if you had found this page:
http://www.g4ilo.com/k2_headset.html , Chris. Mine works fine with
It's better to connect the power feed to the ring on the jack as the
arrangement on PC microphones seems to be that electret microphones have
I was inspired to try to adapt the headset I use for VOIP to the K2, since I
wanted to play with SSB a little. I got the idea from something that W2ENY is
selling on ebay :-) I'm writing this up so it's in the archives in case someone
else has the idea (and remembers to look).
How hard could
12 matches
Mail list logo
