I had this working, but now can’t figure out how I did it, cuz it’s not working
again.
Running Windows 7, N1MM+, K3S connected via USB.
CW and SSB work fine, including macros.
On RTTY (MMTTY), if I hit any macro key, the radio keys up (PTT), but there is
no diddling. At that time, I see the
Are you in USB mode or TX Data mode on the radio?
I use TX Data very successfully. And when I work AFSK I do switch to
ALT mode which would be LSB mode in TX Data. Otherwise, TX Data us a
USB mode. The nice thing about using TX Data mode is that it negates
the COMP and EQ values. When
On Wed,9/16/2015 2:20 PM, Bob McGraw - K4TAX wrote:
Are you in USB mode or TX Data mode on the radio?
Rich is talking about RTTY, which the K3 transmits LSB. On Elecraft
radios, use AFSK-A or FSK-D for RTTY, which, I believe, also bypasses
the COMP, and sets EQ to a fixed high pass filter
I had a few similar problems when starting up my new Win7Pro PC today.
Check to make sure that the Mark frequency is the same on the K3 and MMTTY.
The defaults are not the same. And make sure that the TX Mark frequency is
the same as the RX frequency.
If you are using VOX make sure that it is on
On Wed,9/16/2015 8:45 PM, Steve Lund wrote:
Check to make sure that the Mark frequency is the same on the K3 and MMTTY.
The defaults are not the same. And make sure that the TX Mark frequency is
the same as the RX frequency.
YES! That's a BIG one. If the K3 tones are not the same as the MMTTY
5 matches
Mail list logo