Re: [Elecraft] JT-65

2016-10-15 Thread Nr4c
Same as PSK31, use DATA mode, submode DATA A. Adjust Line In for 4 solid bars of ALC with Fifth bar flashing. Use wsjt-x software. Sent from my iPhone ...nr4c. bill > On Oct 15, 2016, at 9:33 AM, Steven Stuckey wrote: > > I looked in the owners manual and did a search for

Re: [Elecraft] JT-65

2016-10-15 Thread Eric J
Also keep in mind it is a 100% duty cycle mode. I run my K2 at half power and have no problem whether barefoot or running the K2/100. I blew the finals in my HF Packer twice when I forgot even with a small fan mounted on the heatsink. Eric KE6US On 10/15/2016 6:55 AM, David Shoaf wrote:

Re: [Elecraft] JT-65

2016-10-15 Thread Ken Bandy, KJ9B
n...@mailman.qth.net] On Behalf Of Steven Stuckey Sent: Saturday, October 15, 2016 9:34 AM To: Elecraft@mailman.qth.net Subject: [Elecraft] JT-65 I looked in the owners manual and did a search for JT-65 and nothing was found. What do I need to do to use JT-65? I was told once and forgot. I want

Re: [Elecraft] JT-65

2016-10-15 Thread David Shoaf
Assuming you're referring to a K3S, here's a nice set up posted at eHam.net . It provides many of the fundamental configuration details that apply if you're using a KX3 or KX2 as well. If you havent' done so, my suggestion is that you get PSK31 set up and

[Elecraft] JT-65

2016-10-15 Thread Steven Stuckey
I looked in the owners manual and did a search for JT-65 and nothing was found. What do I need to do to use JT-65? I was told once and forgot. I want to know again and I will save it this time. Thanks in advance. -- ​73​ Steven Stuckey - AC9GK - Indiana

[Elecraft] JT-65 w/K3 help for newbee

2011-09-12 Thread Bruce Wade
Loaded JT-65 HF Will the K3 decode it or do I have to wire it to the Mic and speaker on the computer? How do I set it up? I am running a Dell 1.4 GHz with 248 MB of RAM and XP pro SP 2 TNX Bruce, N7ZA __ Elecraft mailing list

Re: [Elecraft] JT-65 w/K3 help for newbee

2011-09-12 Thread Lance Collister, W7GJ
Howdy Bruce, Unfortunately, the K3 does not decode JT65A signals, so you must use an external computer program such as your JT65HF to send and decode them. You just connect the LINE OUT on the computer to the LINE IN on the rear of the K3, and the computer LINE IN to the LINE OUT on the

Re: [Elecraft] JT-65 w/K3 help for newbee

2011-09-12 Thread Matt Wilbur NM6W
On 9/12/11 12:03 PM, Lance Collister, W7GJ wrote: Howdy Bruce, Unfortunately, the K3 does not decode JT65A signals, so you must use an external computer program such as your JT65HF to send and decode them. You just connect the LINE OUT on the computer to the LINE IN on the rear of the K3,