Hi Simon,
I also have no such issue, not on 2m not on 6m and also not on 10m. In the
meantime I made about 3 times a firmware upgrade since I have the K3. But I
also don't see this issue in the older ones.
I see that elecraft works on the issue. But I wonder because some K3's don't
have this
Hi Simon
I use K3 with K144XV and K144RFLK with an external 10MHZ GPS locked signal
adn have done so for 9 months or so now.
I have never seen this characteristic you describe. I can leave it on
GB3VHF beacon using JT65 / WSJT and it stays rock steady at 3Hz discrepancy
all day long. I have
00:52:15 -0700
From: ro...@dio.co
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K144XV + K144RFLK issue
Hi Simon
I use K3 with K144XV and K144RFLK with an external 10MHZ GPS locked signal
adn have done so for 9 months or so now.
I have never seen this characteristic you describe. I
... if I knew how!
Cheers
Simon ZL4PLM
Check out more information on the world 50 MHz and Up : www.zl4plm.com
Date: Fri, 6 Jul 2012 00:52:15 -0700
From: ro...@dio.co
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K144XV + K144RFLK issue
Hi Simon
I use K3 with K144XV
Any progress on this team?
Thats another 4 months
73 Simon ZL4PLM
Check out more information on the world 50 MHz and Up : www.zl4plm.com
From: gm4...@hotmail.com
To: n...@elecraft.com; dro...@necg.de
CC: elecraft@mailman.qth.net
Subject: RE: [Elecraft] K144XV + K144RFLK issue
Date
Hi Simon,
Rich did some tests in March and theorized that there's a problem with
the K3 firmware, not the K3EXREF or the K144RFLK modules. That put it
on my firmware list, where it is still listed as high priority. I took
a stab at it back then but couldn't duplicate anywhere near the
Hi Wayne
Yes I am seeing large jumps 10 Hz or at 144 for sure. I know that others are
seeing jumps too and at 6m and 10m too.
Appreciate you picking this up
be great as at the moment that kind of jump every 3 secs makes weak signal digi
modes difficult and even listening to the local
HI All
I dipped into the Elecraft world again with a K3/10
Plus Tvtr IF and K144XV
Mainly as a transverter driver
I bought the reflock for the radio and the transverter
All is fine and my box is alive and well
Just installed the K144XV and I notice an unusual change in receive freq
reference. To confirm
that just plug it off and see if it still is the same. Just a thought ...
Vy 73, Olli - DH8BQA
http://www.dh8bqa.de/
- Original Message -
From: Simon Lewis gm4...@hotmail.com
To: elecraft@mailman.qth.net
Sent: Tuesday, March 06, 2012 10:31 AM
Subject: [Elecraft] K144XV
Simon,
Do you have another 2m receiver, or know somebody who can receive the
beacon, to check whether or not the beacon's frequency is jumping. If the
beacon's transmitter is crystal controlled with the crystal in an oven, the
jumps in frequency you hear could be due to the beacon not your
50 MHz and Up : www.zl4plm.com
From: lx...@pt.lu
To: dro...@necg.de
Date: Tue, 6 Mar 2012 23:05:59 +0100
CC: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K144XV + K144RFLK issue
Simon,
Do you have another 2m receiver, or know somebody who can receive the
beacon, to check whether
Message -
From: Simon Lewis gm4...@hotmail.com
To: elecraft@mailman.qth.net
Sent: Tuesday, March 06, 2012 10:31 AM
Subject: [Elecraft] K144XV + K144RFLK issue
HI All
I dipped into the Elecraft world again with a K3/10
Plus Tvtr IF and K144XV
Mainly as a transverter driver
I bought
] K144XV + K144RFLK issue
Date: Tue, 6 Mar 2012 14:17:04 -0800
CC: gm4...@hotmail.com; elecraft@mailman.qth.net
This is likely to be a firmware issue and is on my list.
73,
Wayne
N6KR
On Mar 6, 2012, at 1:02 PM, Oliver Dröse wrote:
Hi Simon,
can you check if the behaviour
13 matches
Mail list logo