On Sat,11/22/2014 2:58 AM, Anton Koval, MW0EDX via Elecraft wrote:
I understand that K3 can change, depending on the bands, drive power to equally
drive the KPA500 so the same output power will be on all bands ?
Yes, the K3 can be set to remember drive power by band and mode. The
KPA500 does
Hi Anton,
I have a K3, KPA500 and two SteppIRs (two controllers). The SteppIRs follow
the K3 precisely. It's totally transparent. Just remember to use protection
so that you don't accidentally transmit high power when the antenna is
tuning. Damage to the SteppIR EHU can result. Use the KPA500 aux
Yes the SteppIR will follow the radio. I don't have a KPA500 so cannot answer
that one.
73, Mike NF4L
> On Nov 22, 2014, at 5:58 AM, Anton Koval, MW0EDX via Elecraft
> wrote:
>
> GM/GA/GE,
> The K3 question in connection with Steppir yagi(s).
> Will Steppir yagi follow K3 in the same manner a
GM/GA/GE,
The K3 question in connection with Steppir yagi(s).
Will Steppir yagi follow K3 in the same manner as it follows Icom rigs, that
is, one tunes the Icom rig and the Stepper exactly follows it or does one need
to transmit on K3 so the Steppir knows where to tune ? Or even manually tune
t
4 matches
Mail list logo
