HiThis is explained in the manual.73 Tom
Sent from my Samsung Galaxy smartphone.
Original message From: Gary Smith Date:
2018-11-03 4:05 PM (GMT-05:00) To: Elecraft@mailman.qth.net Subject: Re:
[Elecraft] K3 - TX EQ settings not remembered.
Folks,
As several mentioned
Folks,
As several mentioned, Win4K3 might be the
answer behind this issue. The problem was
unwittingly caused on my end, I never set
the Mic EQ in Win4K3, I really was only
using it for the ability to interface WSJT
along with all my other programs.
I set the TX EQ values in Win4K3 to match
It's been a while since I used Win4K3, but I believe the EQ settings can be
set there. That's probably why yours are getting set back.
73,
Randy, KS4L
On Fri, Nov 2, 2018, 3:07 PM Don Wilhelm Gary,
>
> Email Tom (author of Win4K3) and see if he has some kind of workaround.
>
> 73,
> Don W3FPR
>
Gary,
Email Tom (author of Win4K3) and see if he has some kind of workaround.
73,
Don W3FPR
On 11/2/2018 3:59 PM, Gary Smith wrote:
Don,
I'll give your suggestion a try & see how
that does.
I do use Win4K3, I need it to use WSJT as
WSJT doesn't like to share ports. I used
to use LP-Bridge
Don,
I'll give your suggestion a try & see how
that does.
I do use Win4K3, I need it to use WSJT as
WSJT doesn't like to share ports. I used
to use LP-Bridge which let me
simultaneously run all my software
flawlessly, till WSJT... and I fast
discovered it would not play nice unless
WSJT
How are you turning off the K3? I seem to recall that some settings
aren't saved if you turn it off by removing power.
Dennis NJ6G
On 11/2/2018 10:31, Gary Smith wrote:
I seem to have an issue with the K3 memory
settings for the microphone.
Gary,
Are you using any software to control the K3?
I have just been informed that Win4K3 will often change the EQ settings.
Remove the USB or RS-232 connection and try it with only the K3, then
set the SSB TX EQ. Check later to see if it has changed.
73,
Don W3FPR
On 11/2/2018 3:29 PM,
Hi Don,
No, I set them for SSB and at a later time
the TX EQ is flat and I have to change it
back to the settings to fit my mic. I
don't use AM except to listen to broadcast
stations & listen to the nature of RFI.
It was when in AM I was listening to RFI
that I thought to check the TX EQ
Gary,
The EQ settings are per-mode.
If you set them for SSB mode and then go to AM mode, you will find them
set flat.
Is that possibly the problem?
73,
Don W3FPR
On 11/2/2018 1:31 PM, Gary Smith wrote:
I seem to have an issue with the K3 memory
settings for the microphone. I changed the
TX
I seem to have an issue with the K3 memory
settings for the microphone. I changed the
TX EQ to match settings and now when I
check, the TX EQ is back to flat again.
This has been happening since I set the
values. I've had to restore the values I
know them by heart and can do it quickly.
10 matches
Mail list logo