[Elecraft] K3 - Using MiC Key (PTT) to Transmit (activate) VOX (NOT Computer)

2014-08-15 Thread KB7WVB
I wish to manually key the transmitter with VOX, and while transmitting have the VOX activate to LISTEN between words so that I can hear if I double. I don't want VOX on all the time to key the transmitter when I sneeze, someone talks to me, I murmur, phone rings, wife pours hot soup in my lap,

Re: [Elecraft] K3 - Using MiC Key (PTT) to Transmit (activate) VOX (NOT Computer)

2014-08-15 Thread Mike Reublin
Is it possible you have confused PTT and VOX? I can't imagine VOX being controlled by a foot switch. 73, Mike NF4L On Aug 15, 2014, at 12:40 PM, KB7WVB kb7...@gmail.com wrote: I wish to manually key the transmitter with VOX, and while transmitting have the VOX activate to LISTEN between

Re: [Elecraft] K3 - Using MiC Key (PTT) to Transmit (activate) VOX (NOT Computer)

2014-08-15 Thread GRANT YOUNGMAN
I think the point is to have VOX inactive until PTT is keyed. In this mode, PTT wouldn’t key the radio, it would simply activate VOX. If PTT was not keyed, the radio would not respond to audio and key the transmitter, even with VOX turned on. Another way to do this of course, would be a

Re: [Elecraft] K3 - Using MiC Key (PTT) to Transmit (activate) VOX (NOT Computer)

2014-08-15 Thread iain macdonnell - N6ML
I think it's an interesting idea. It seems it should be feasible to implement in firmware, but maybe non-trivial. Thinking outside the box; what if you route the mic signal through the footswitch instead of PTT? Or maybe through a relay that the footswitch triggers... and keep VOX on all the

Re: [Elecraft] K3 - Using MiC Key (PTT) to Transmit (activate) VOX (NOT Computer)

2014-08-15 Thread Don Wilhelm
An alternative if one is using an electret microphone is *not* to apply bias from the K3, but to bias the microphone from a 10k resistor fed from mic jack pin 6 (to mic jack pin 1). Put a relay in series with the resistor and operate that relay from the foot switch. The microphone will not

Re: [Elecraft] K3 - Using MiC Key (PTT) to Transmit (activate) VOX (NOT Computer)

2014-08-15 Thread Richard Ferch
It occurs to me that another option might be to connect the footswitch, with a pullup resistor to 5VDC, to pin 7 of the ACC connector, and set CONFIG:TX INH to HI=INH. This should prevent the K3 from transmitting except when the footswitch was pressed. You might want to wire an SPST switch in

Re: [Elecraft] K3 - Using MiC Key (PTT) to Transmit (activate) VOX (NOT Computer)

2014-08-15 Thread KB7WVB
I appreciate all of your thoughts. And the thinking questions, helped to understand what I was trying to do better. I believe your understanding the problem better than I do. I'm Good. VOX terrifies me, it can really mess up a net if left on accidently and the phone rings, we had to move