Hello,
I tried upgrading the firmware to 4.93 today. I first tried a plain
send all firmware, MCU load went fine and then FPF failed. I restarted
the K3 as suggested and at this point FPF was listed as 1.16 and no
longer proposed for update. I was able to load DSP firmware after this,
by doing a
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
You're using an older version of the utility. Try version 1.14.10.24. You're
probably okay if the K3 is reporting 1.16.
David, W4SMT
From: Pierfrancesco Caci p...@tippete.net
To: elecraft@mailman.qth.net
Sent: Saturday, November 29, 2014 4:07 AM
Subject: [Elecraft] K3 FPF firmware load
using an older version of the utility. Try version 1.14.10.24. You're
probably okay if the K3 is reporting 1.16.
David, W4SMT
From: Pierfrancesco Caci p...@tippete.net
To: elecraft@mailman.qth.net
Sent: Saturday, November 29, 2014 4:07 AM
Subject: [Elecraft] K3 FPF firmware load
David == David Fleming df...@yahoo.com writes:
David You're using an older version of the utility. Try version
David 1.14.10.24. You're
David probably okay if the K3 is reporting 1.16.
Thanks David, that did it.
Now I'm curious as to why it was failing
David == David Cole d...@nk7z.net writes:
David Along this same line... I just checked, and I am showing only 4.86
David available, just did the get software from Elecraft thing, and I don't
David see 4.93???
4.93 is a beta release, you have to manually fetch it.
--
6 matches
Mail list logo