ll this observed on Spectrogram 16.
>
>Regards,
>
>Mike VP8NO
>
>- Original Message -
>From: "Stewart"
>To: "Alex Ponomarenko" ;
>
>Sent: Saturday, August 15, 2009 5:07 AM
>Subject: Re: [Elecraft] K3 FW3.25 Auto-Notch Filter problem.
>
&g
t;
To: "Alex Ponomarenko" ;
Sent: Saturday, August 15, 2009 5:07 AM
Subject: Re: [Elecraft] K3 FW3.25 Auto-Notch Filter problem.
> Yes, I am finding the same here - AGH !
>
> The Manual notch is fine, however, although there is a slight
> notching action in Auto it is virtual
Tried it again using my XG2 as a signal source, and it's working OK.
Gremlins at work !
73
Stewart G3RXQ
On Sat, 15 Aug 2009 11:03:23 +0100, Stewart wrote:
> As you say Brett ... Interesting.
> I will try it again, and look for any new Menu settings that may have crept
> in unnoticed.
> This was
As you say Brett ... Interesting.
I will try it again, and look for any new Menu settings that may have crept in
unnoticed.
This was on SSB, a mode which I use almost 100% of the time.
73
Stewart G3RXQ
On Sat, 15 Aug 2009 02:24:57 -0700, Brett Howard wrote:
> Interesting.. Mine seems to be worki
Interesting.. Mine seems to be working as it did before. I just tied
it on a few AM stations near 40. Got in the area in LSB got it setup
with the carrier in my window hit the button and poof gone.
I then found another tone that seemed to be drifting back and forth a
little bit and hit the au
Yes, I am finding the same here - AGH !
The Manual notch is fine, however, although there is a slight
notching action in Auto it is virtually useless.
Some'at wrong with the DSP code...
73
Stewart G3RXQ
On Sat, 15 Aug 2009 11:58:50 +0300, Alex Ponomarenko wrote:
> After installing last 3.25 bet
After installing last 3.25 beta-version,
in my K3 does not working Notch-Filter in Auto-Mode.
With manual Notch all Ok. Please check this in yours K3.
--
73! Alex de UR5LAM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/lis
7 matches
Mail list logo