I'm not asking for help fixing anything but just offering this as
interesting phenomena that I encountered.
A couple weeks ago I was running digital sw using the mode JT-65c
(part of WSJT9.3) on 1296 eme and had two Australian stations reply
on a chat room we use for coordinating that my
In the cw mode what is the plus symbol near the
bottom right corner of the icon display signify?
Smith Bradford
W9HAK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Smith,
That indicates that CW QRQ in the Config menu is turned on.
In other words high speed full break-in is enabled.
Rick
K6LE
On 2/1/2013, at 9:21 , W9HAK w9...@insightbb.com wrote:
In the cw mode what is the plus symbol near the bottom right corner of the
icon display signify?
, W0FM
-Original Message-
From: Brendan Minish [mailto:ei6iz.bren...@gmail.com]
Sent: Monday, March 22, 2010 3:07 PM
To: Terry Schieler
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] (K3) Mode change with band unpredictible
Try this without having any software running and see if you
My K3 (#474) seems to be all over the board when it comes to changing bands
and ending up with the expected or desired mode for that frequency. I can
be on 14.030 CW, go to 10 meters SSB and then back to 14.030 and the mode
will be USB or LSB there. There seems to be no rhyme nor reason to the
Try this without having any software running and see if you have the
same issue ?
(very?) old kenwood radios needed the mode to be set before the
frequency, this does not work so well on modern radios that remember
mode on a per band basis
On Dxbase I fixed this in the K3 radio configuration
What logging software are you using?
-Original Message-
From: Terry Schieler terry.schie...@wirelessusa.com
Sent: Mar 22, 2010 2:25 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] (K3) Mode change with band unpredictible
My K3 (#474) seems to be all over the board when it comes
, elecraft@mailman.qth.net
Subject: Re: [Elecraft] (K3) Mode change with band unpredictible
What logging software are you using?
-Original Message-
From: Terry Schieler terry.schie...@wirelessusa.com
Sent: Mar 22, 2010 2:25 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] (K3) Mode
@mailman.qth.net
Subject: Re: [Elecraft] (K3) Mode change with band unpredictible
Sorry, I should have read more carefully...I've never used
N3FJP software, but I have the same problem with Logic 8. In
my case it's not the K3, its the software.
-Original Message-
From: wb5
I was playing with HRD this afternoon and when swapping bands I ended up on
14 Mc in LSB mode..
I've been trying to get it on USB again but I'm missing something I guess
(and didn't even have a beer this afternoon.)
Where can set the proper mode again?
73's, Evert PA2KW
Problem solved. I think the LSB mode is somewhere disabled for 14 Mc.
By toggling the mode (up) I didn't get the USB Mode. (For some unknown
reason I'm always toggling up until I get what I want).
By toggling down I did get back the USB mode.
Wheird
73's, Evert PA2KW
Evert,
You inadvertently switched to USB. The way to do it by intent is to
hold ALT (yes, the MODE down button (you must have tapped for longer
than a tap).
Only one of the sidebands is shown for any one band - same way for CW
and DATA modes - if you want to change to the opposite sideband,
: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Mode
Evert,
You inadvertently switched to USB. The way to do it by intent is to
hold ALT (yes, the MODE down button (you must have tapped for longer
than a tap).
Only one of the sidebands is shown for any one band - same way for CW
and DATA modes
And this is the one big reason that I'd recommend the Yaesu over the K3:
user interface.
What do I know, though, I have a K2.
On Sun, 13 Sep 2009, Don Wilhelm wrote:
Evert,
You inadvertently switched to USB. The way to do it by intent is to
hold ALT (yes, the MODE down button (you must
14 matches
Mail list logo