On Dec 4, 2007 3:28 AM, Matt Zilmer [EMAIL PROTECTED] wrote:
== stapled-on ==
Data MD: Data A
TX line in setting: 20% of full scale. The output is a laptop's
speaker jack and the setting reflects the playback volume set on the
laptop.
RX line out setting: 55% of full scale. The input
I was using UpperSB. I tried the DATA A mode with the same results. I
didn't like the very narrow bandwidth the DATA mode uses.
I am a little confused by the DATA mode selections. I don't want to send
PSK via CW paddles or by FSK. I am just trying to go to/through the computer
I am having a little trouble with PSK. The power output meter is not moving
above 1 bar. I have selected Line In in the MIC SEL menu. I can hear the
PSK warble in the monitor. I can run up the Line In Gain to make the ALC
meter show 6 bars but the Power meter still doesn't move.
I am having a little trouble with PSK.
big snip
Did you put the K3 in Data A mode?
You should be running mic gain so that ALC barely registers, or below.
Zero is Good. Set the power however you want.
I included a previous summary of settings I've uesd that might help
out with this.
matt -
4 matches
Mail list logo