When you are not in a menu, does the VFO B frequency change when you move the
encoder B knob?
-
73, Stan - KR7C
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Stumped-tp5975007p5975616.html
Sent from the [K3] mailing list archive at Nabble.com.
Hi Tony,
My problem was momentary, it seems. Trying just now, both pulling an
pushing it seems to work fine.
73,
Dick - KA5KKT
Weird, but I have the same problem with the B encoder on one of my K3's. If
I pull s
ssage-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Edward Dickinson, III
Sent: Sunday, January 30, 2011 4:20 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Stumped.
Hi Dohn,
Interestingly, I had the 1st problem I've ever noted with
Hi Dohn,
Interestingly, I had the 1st problem I've ever noted with the "B
VFO/Encoder" last night. As I was attempting to change the IF DSP the value
would either not change or stick and shift several values at once. A couple
of taps with my fingernail on the knob seems to have cleared it right
riginal Message -
From: Phil Hystad
To: Dohn Smythe
Cc: elecraft@mailman.qth.net
Sent: Sun, 30 Jan 2011 19:14:45 - (UTC)
Subject: Re: [Elecraft] K3 Stumped.
I would check connections on the VFO B encoder with the circuit board or look
for a short. Then, if that does not show an
I would check connections on the VFO B encoder with the circuit board or look
for a short. Then, if that does not show anything, give up. Actually, I would
give up -- my next step being to call Elecraft support. Or, alternatively,
call Elecraft support first.
Good luck,
73, phil, K7PEH
On
Fellas,
I am firing up my K3 for the second time. I wanted to begin to do the
synthesizer calibration.
When I tap Menu, it goes to "LCD CRT" and can be adjusted by VFO A. I CANNOT
access any other menu item.
When I hold CONFIG, It says "CONFIG" briefly in VFO B window and as soon as I
let up
7 matches
Mail list logo