Thanks for the Email suggestions.
Setting tune power back to normal did not fix it. It fixed it for one cycle.
I also had my K3 lockup in the config menu. I suspect some problem with the
new beta firmware to be the cause, possibly corrupted memory or something
like that. I have gone back to the
Hi Mike,
your problem is in SSB or also in CW mode or in both?
There are no visible spikes on DB6NT 144MHz transverter/25W out.
Firmware 2.10 now implemented.
73!
Lexa, ok1dst
AD6XY - Mike napsal(a):
Thanks for the Email suggestions.
Setting tune power back to normal did not fix it. It
I am glad it is not affecting you Lexa - possibly just my K3. I noticed it
while using the key to generate a carrier in SSB mode to set the power level
- a pulse of all LEDs lighting up on the XV50. Using the scope at the 28MHz
IF I could see the spikes clearly. I would estimate 2 to 3 times the
I have come across a problem with my K3 driving an XV50 converted to 70MHz.
The K3 low level output from the KXV3 produces high power spikes before
settling to the correct level - which it then holds until you change mode,
or power setting. It also produces spikes at full power ( a few mW) as
4 matches
Mail list logo