What are the correct setting to get the K3 to work with the Microham MKII.
I see K3 and K3 (patched) with no info at all about what K3 patched even
means. It used to work with just K3. Work has been hectic and finally I
get a chance to work CQ WW CW and the MKII will not connect with the K3
What are the correct setting to get the K3 to work with the Microham
MKII. I see K3 and K3 (patched) with no info at all about what K3
patched even means.
Either will work. The (patched) version clears the CAT queue more
quickly if the K3 stops responding (user turns it off but leaves a
style type=text/css
- /style
Hi John,
First try to set
up the Microkeyer without any external programms.
Make sure K3 in
enabled in the Programm.
You should see the K3 Frequency in the
Microkeyer Programm...
For the cables.. only the usb cable goes
to the computer
Be sure install the drivers
Is my DB37 cable incorrect?
No, you simply have the very first version the factory
built.
-Original Message-
From: John Gaynard [mailto:jgayn...@columbus.rr.com]
Sent: Monday, January 05, 2009 11:56 AM
To: li...@subich.com
Subject: RE: [Elecraft] K3 using Microham MKII
What connections are required to run PSK with the Microham MKII interfacing
to the K3? Where to the audio cables on the MK II DB37 connect? I cannot
find any info for connecting the MKII to the K3 in the Microkeyer II doc, or
if it is there, I don't see it. Also, I am using one of the new Sony
5 matches
Mail list logo