It is in the latest KAT500 Serial Command Reference, and requires V1.42 or
later firmware in the KAT500.
Jack, W6FB
> On Mar 1, 2018, at 3:30 PM, Harlan Sherriff via Elecraft
> wrote:
>
> Thanks Dick, but I don’t see that command in either programmers reference
>
Harlan,
If you have software that will poll the KAT500 with the TP command then
it may be close to real time, but not exactly.
73,
Don W3FPR
On 3/1/2018 6:30 PM, Harlan Sherriff wrote:
Thanks Dick, but I don’t see that command in either programmers reference
manual.
So Don, there is no
Thanks Dick, but I don’t see that command in either programmers reference
manual.
So Don, there is no way to programmatically know when the tuning has completed?
Sent from my iPhone
> On Mar 1, 2018, at 6:16 PM, Don Wilhelm wrote:
>
> Harlan,
>
> I don't believe
>
Subject: Re: [Elecraft] KAT500 commands
Harlan,
I don't believe that is available on a real time basis (which is what you
apparently are seeking).
Yes, the K3 knows when the KAT500 has stopped tuning, but it is not
available as a GET command.
73,
Don W3FPR
On 3/1/2018 6:02 PM, Harlan
Harlan,
I don't believe that is available on a real time basis (which is what
you apparently are seeking).
Yes, the K3 knows when the KAT500 has stopped tuning, but it is not
available as a GET command.
73,
Don W3FPR
On 3/1/2018 6:02 PM, Harlan Sherriff via Elecraft wrote:
Is there a GET
Is there a GET command for either the K3 or KAT500 that will show when the
tuner has completed a tune?
Harlan
K4HES
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
6 matches
Mail list logo