>
> Sent from Mail for Windows
>
> From: Ken K6MR
> Sent: Sunday, January 30, 2022 7:28 PM
> To: Ed G; elecraft@mailman.qth.net
> Subject: Re: [Elecraft] KPA1500 Remote Software Question
>
> I don't remember the slider ever moving in response to the fan speed while
&g
Thanks Ken. I could easily be mis-remembering!
--Ed, N3CW—
Sent from Mail for Windows
From: Ken K6MR
Sent: Sunday, January 30, 2022 7:28 PM
To: Ed G; elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA1500 Remote Software Question
I don't remember the slider ever moving in response
, January 30, 2022 1:29 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KPA1500 Remote Software Question
Folks,
Using the KPA1500 remote program. There is a slider control for the fan
just below the temp bargraph. I can manually adjust the slider to give me
different fan speeds, so
Neighbor and serious contester K6XX was the engineer who put both of
their amps into production. He borrowed my KPA1500 for a contest after
he lost everything in a major wildfire. He told me my fans were super
dirty with dust, because I was running them at far higher speed than
necessary to
Folks,
Using the KPA1500 remote program. There is a slider control for the fan
just below the temp bargraph. I can manually adjust the slider to give me
different fan speeds, so the control is communication with the KPA1500.
I seem to remember when I first installed the remote
I can't get the software to power on the amplifier or connect
to it.
And, yes, the Wake on Lan function in the tech menu is enabled.
If I manually power it on, then it connects and even turns off
the amp.
The KPA 1500 Utility, using the same ports and cable, does power it on
and off.
I've
Hi Rick,
Thanks for taking the time to write a long and extremely helpful reply
to my plea for help. I'm new to networking and port forwarding. Learning
by doing here. Great to have an Elmer step up.
73,
Larry, K4KGG
__
Elecraft
See below.
GL,
/Rick N6XI
On Wed, Aug 7, 2019 at 2:24 PM Larry Libsch wrote:
> I am trying to set up the KPA1500 Remote Software to access my KPA1500
> from a distant location over the internet. Some questions:
>
> Will I be successful using a reserved IP rather than a static IP?
>
Probably.
I am trying to set up the KPA1500 Remote Software to access my KPA1500
from a distant location over the internet. Some questions:
Will I be successful using a reserved IP rather than a static IP?
The laptop I plan to use as a server is on the same LAN as the KPA1500.
When I click the Host
Well, I got it to work finally, tnx to all and Paul, K9NU ..
Now the question is, is it possible to control the amp remotely WITHOUT having
a dedicated PC running ?
VPN, different port forwarding . some other configuration ?
Or is it just not possible the way the software is written and
The KPA1500 remote utility is a very nice and useful control program to have.
I’m using the latest – ver 1.0.22. I wonder if Roger might consider (in his
next update to this program) enhancing the bargraph displays for power,
current, and SWR, so that there is a way to see relative readings
Ah of course, stupid me. I was expecting it with the KPA1500
soft/firmware. Thank you.
Rick NHC
PS Now to tell Norton to ignore it.
On 10/17/2018 11:02 AM, Richard Thorne wrote:
I use Firefox and I was able to get to 1.22
From the main web site:
- click on Firmware & S/W
- click
I use Firefox and I was able to get to 1.22
From the main web site:
- click on Firmware & S/W
- click on Logging and Remote Control Software for the ...
- scroll down to KPA1500, KPA500, KAT500 Remote Software
Rich - N5ZC
On 10/17/2018 12:43 PM, Rick WA6NHC wrote:
I'm
I'm reading in the Elecraft newsletter that the KPA1500 remote software
v1.22 is available now.
I'm not seeing any links.
Is Firefox being stupid again with cache or is it not there?
73,
Rick nhc
__
Elecraft mailing list
Home:
It will be up on the website a little later this week. We're finishing up
testing and should have it up shortly.
73,
Eric
/elecraft.com/
On 8/1/2018 6:04 AM, Paul Christensen wrote:
"The link will be back soon. We found a few bugs in the remote sw and
temporarily
pulled it from the ftp site.
>"The link will be back soon. We found a few bugs in the remote sw and
temporarily
pulled it from the ftp site. Stay tuned! We'll announce here when it is
back up next week.
Eric /elecraft.com/"
Any further updates on when the KPA1500 Remote Software will become
available for download?
16 matches
Mail list logo
