[Elecraft] KX3 Mic input problem

2013-03-13 Thread Hugh Bradley
The KX3 mic input uses a multi barrel jack plug which enables up down channel changing using buttons on the hand mic. I an regular stereo jack is placed into the socket, the radios VFO start to change continuously. To use digital modes, I need to use the mic input to connect to my sound card.

Re: [Elecraft] KX3 Mic input problem

2013-03-13 Thread David G4DMP
Hugh - I would have thought the best solution would be to buy the correct 4-pole 3.5mm jack plug. These are a standard item available from all good component suppliers. In the UK we have them at Maplin.co.uk under part number QT65V. Perhaps a search on eBay might bring up a supplier nearer you.

Re: [Elecraft] KX3 Mic input problem

2013-03-13 Thread Bruce Beford
Switch to SSB first, then go into the menu to change the MIC BTN parameter? Bruce, N1RX There appears to be a setting on the Configuration menu to turn off the up/down and PTT but this is non functional. When selected on the menu by VFOB the options on VFO A say n/a.

Re: [Elecraft] KX3 Mic input problem

2013-03-13 Thread Phil Debbie Salas
Here in the US we can order a Mouser 171-7435-EX 4-conductor 3.5mm plug. Plenty in stock (over 2500). Cost is around $2.50 each plus shipping. Phil – AD5X “The KX3 mic input uses a multi barrel jack plug which enables up downchannel changing using buttons on the hand mic. I an regular

Re: [Elecraft] KX3 Mic input problem

2013-03-13 Thread Rick Robinson
As was mentioned previously, select ssb then go to the menu. I had the same issue and this solved my problem. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: