Hopefully any changes along that line will be rolled over into the KX2
software as well. My skills with paddles aren't quite good enough to
be properly decoded for the digital modes (and my coordination is has
gone downhill from my younger years).
After getting the necessary USB sound card
Good point.
Maybe the levels also could be stored for data and voice / cw separately.
That would be awesome.
73
La4tta Erlend
8. jul. 2016 01:25 skrev "Bill Frantz" :
> Whenever I switch between SSB and digital, I have to do a complex dance
> changing levels, the mic
Whenever I switch between SSB and digital, I have to do a
complex dance changing levels, the mic bias setting, and pluggin
cables. The K3 is so much superior in this area. Anything to
improve the situation is desirable.
Note that since I haven't yet mastered a paddle, I need a
computer to
Or does he mean the KX2? If so I believe the
latest firmware fixes that issue.
Phil W7OX
On 7/7/16 10:22 AM, Erlend Grimseid wrote:
What firmware are you using Fred? Because on my radio the bias stays on
when i go from voice to data mode. So if i forget to turn out off i have to
switch to
What firmware are you using Fred? Because on my radio the bias stays on
when i go from voice to data mode. So if i forget to turn out off i have to
switch to voice and then back to data.
I don't use the bias voltage for anything, but someone might have use for
it, that's why i don't recommend
I actually like it working as it is. When I go into data mode I don't
have to turn off the bias etc.. I think that is why it works the way it
does.. Fred
On 7/7/16 9:14 AM, John Pitz wrote:
> I would like to second that request!
>
>
>
> On Thu, 2016-07-07 at 09:39 +0200, Erlend Grimseid
already done in the latest beta MCU 2.66 according to Elecraft website
geoff - W1OH
On 7/7/16 09:14, John Pitz wrote:
I would like to second that request!
On Thu, 2016-07-07 at 09:39 +0200, Erlend Grimseid wrote:
When switching to data modes, the mic btn and mic bias settings in the
I would like to second that request!
On Thu, 2016-07-07 at 09:39 +0200, Erlend Grimseid wrote:
> When switching to data modes, the mic btn and mic bias settings in the menu
> is disabled.
> I use vox in some settings and have rigged a cable with ptt for my TNC.
> Also if i forget to turn of
When switching to data modes, the mic btn and mic bias settings in the menu
is disabled.
I use vox in some settings and have rigged a cable with ptt for my TNC.
Also if i forget to turn of mic bias before connecting my smartphone, the
phone goes crazy and thinks I'm pushing buttons on my headset.
9 matches
Mail list logo