[Elecraft] Need help to cope with the K2-KPA100 Info 080 message

2004-07-27 Thread Pauli Nunez EA3BLQ
Hi K2rs, Greetings from Barcelona. Gary Surrency, in his last message to me on this subject, said: "It certainly looks like you have found the cause of the INFO 80 message" Just for your knowledge and for the record in case my "KPA100 Info 080" experience may be of any future help to some other

Re: [Elecraft] Need help to cope with the K2-KPA100 Info 080 message

2004-07-19 Thread Bill Coleman
On Jul 19, 2004, at 5:59 PM, Pauli Nunez EA3BLQ wrote: Any new ideas will be more than welcome. Best wishes for good luck to you all. I had a persistant, intermittant INFO 080 message that I finally traced down to a bit of slightly conductive solder flux between the two pins of the AF Filt

Fw: [Elecraft] Need help to cope with the K2-KPA100 Info 080 message

2004-07-19 Thread Pauli Nunez EA3BLQ
From: "Pauli Nunez EA3BLQ" <[EMAIL PROTECTED]> > > To: > > Sent: Sunday, July 18, 2004 7:29 PM > > Subject: [Elecraft] Need help to cope with the K2-KPA100 Info 080 message > > > > > > > Greetings from Barcelona to all. > > > > >

Re: [Elecraft] Need help to cope with the K2-KPA100 Info 080 message

2004-07-18 Thread Don Brown
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net> Sent: Sunday, July 18, 2004 12:29 PM Subject: [Elecraft] Need help to cope with the K2-KPA100 Info 080 message Greetings from Barcelona to all. Friends, need help to cope with the dreaded and hatred "Info 080"

Re: [Elecraft] Need help to cope with the K2-KPA100 Info 080 message

2004-07-18 Thread Philip L. Carter
Pauli, Is it possible that you popped the 150uH (I think) choke in the rs232 part of the KPA100 when you had it out? If everything else is working, It has to be in either the KPA100 or maybe in the menu setting for the PA. This of course assumes that you have the cable correct that hooks eve

Re: [Elecraft] Need help to cope with the K2-KPA100 Info 080 message

2004-07-18 Thread Frank DL4KQ
Have the SAME problem here with 3 x K2`s (+KPA100 and KAT100 in EC2) ! > After having made, checked and rechecked all the split connections, I > switched the K2 on and ... guess what ...? You are right, I got the damned > "Info 080" message. First time I saw it. Tried installing the KPA100 > dire

[Elecraft] Need help to cope with the K2-KPA100 Info 080 message

2004-07-18 Thread Pauli Nunez EA3BLQ
Greetings from Barcelona to all. Friends, need help to cope with the dreaded and hatred "Info 080" message. Here's my story: Have been working with the integrated K2/100 and the KAT100-1 for rather a long time with no problem at all whatsoever. One day, some three months ago, I decided to upgra